This patch does the same thing as you said in your mail. It should work, I have tested on my HP huge system. On 11/06/2014 09:48 AM, Takao Indoh wrote: > (2014/11/06 10:35), Li, ZhenHua wrote: >> Yes, that's it. The function context_set_address_root does not set the >> address root correctly. >> >> I have created another patch for it, see >> https://lkml.org/lkml/2014/11/5/43 > > Oh, ok. I'll try again with this patch, thank you. > > Thanks, > Takao Indoh > >> >> Thanks >> Zhenhua >> >> On 11/06/2014 09:31 AM, Takao Indoh wrote: >>> Hi Zhenhua, Baoquan, >>> >>> (2014/10/22 19:05), Baoquan He wrote: >>>> Hi Zhenhua, >>>> >>>> I tested your latest patch on 3.18.0-rc1+, there are still some dmar >>>> errors. I remember it worked well with Bill's original patchset. >>> >>> This should be a problem in copy_context_entry(). >>> >>>> +static int copy_context_entry(struct intel_iommu *iommu, u32 bus, u32 devfn, >>>> + void *ppap, struct context_entry *ce) >>>> +{ >>>> + int ret = 0; /* Integer Return Code */ >>>> + u32 shift = 0; /* bits to shift page_addr */ >>>> + u64 page_addr = 0; /* Address of translated page */ >>>> + struct dma_pte *pgt_old_phys; /* Adr(page_table in the old kernel) */ >>>> + struct dma_pte *pgt_new_phys; /* Adr(page_table in the new kernel) */ >>>> + u8 t; /* Translation-type from context */ >>>> + u8 aw; /* Address-width from context */ >>>> + u32 aw_shift[8] = { >>>> + 12+9+9, /* [000b] 30-bit AGAW (2-level page table) */ >>>> + 12+9+9+9, /* [001b] 39-bit AGAW (3-level page table) */ >>>> + 12+9+9+9+9, /* [010b] 48-bit AGAW (4-level page table) */ >>>> + 12+9+9+9+9+9, /* [011b] 57-bit AGAW (5-level page table) */ >>>> + 12+9+9+9+9+9+9, /* [100b] 64-bit AGAW (6-level page table) */ >>>> + 0, /* [111b] Reserved */ >>>> + 0, /* [110b] Reserved */ >>>> + 0, /* [111b] Reserved */ >>>> + }; >>>> + >>>> + struct domain_values_entry *dve = NULL; >>>> + >>>> + >>>> + if (!context_present(ce)) { /* If (context not present) */ >>>> + ret = RET_CCE_NOT_PRESENT; /* Skip it */ >>>> + goto exit; >>>> + } >>>> + >>>> + t = context_translation_type(ce); >>>> + >>>> + /* If we have seen this domain-id before on this iommu, >>>> + * give this context the same page-tables and we are done. >>>> + */ >>>> + list_for_each_entry(dve, &domain_values_list[iommu->seq_id], link) { >>>> + if (dve->did == (int) context_domain_id(ce)) { >>>> + switch (t) { >>>> + case 0: /* page tables */ >>>> + case 1: /* page tables */ >>>> + context_set_address_root(ce, >>>> + virt_to_phys(dve->pgd)); >>> >>> Here, in context_set_address_root(), the new address is set like this: >>> >>> context->lo |= value & VTD_PAGE_MASK; >>> >>> This is wrong, the logical disjunction of old address and new address >>> becomes invalid address. >>> >>> This should be like this. >>> >>> case 1: /* page tables */ >>> ce->lo &= (~VTD_PAGE_MASK); >>> context_set_address_root(ce, >>> virt_to_phys(dve->pgd)); >>> >>> And one more, >>> >>>> + ret = RET_CCE_PREVIOUS_DID; >>>> + break; >>>> + >>>> + case 2: /* Pass through */ >>>> + if (dve->pgd == NULL) >>>> + ret = RET_CCE_PASS_THROUGH_2; >>>> + else >>>> + ret = RET_BADCOPY; >>>> + break; >>>> + >>>> + default: /* Bad value of 't'*/ >>>> + ret = RET_BADCOPY; >>>> + break; >>>> + } >>>> + goto exit; >>>> + } >>>> + } >>> (snip) >>>> + if (t == 0 || t == 1) { /* If (context has page tables) */ >>>> + aw = context_address_width(ce); >>>> + shift = aw_shift[aw]; >>>> + >>>> + pgt_old_phys = (struct dma_pte *) >>>> + (context_address_root(ce) << VTD_PAGE_SHIFT); >>>> + >>>> + ret = copy_page_table(&pgt_new_phys, pgt_old_phys, >>>> + shift-9, page_addr, iommu, bus, devfn, dve, ppap); >>>> + >>>> + if (ret) /* if (problem) bail out */ >>>> + goto exit; >>>> + >>>> + context_set_address_root(ce, (unsigned long)(pgt_new_phys)); >>> >>> ditto. >>> >>> Thanks, >>> Takao Indoh >>> >>> >>>> >>>> >>>> 0console [earlya[ 0.000000] allocate tes of page_cg 'a ong[ >>>> 0.000000] tsc: Fast TSC calibration using PIT >>>> 0031] Calibrating delay loop (skipped), value calculated using timer >>>> frequency.. 5586.77 BogoMIPS (lpj=2793386) >>>> [ 0.010682] pid_max: default: 32768 minimum: 301 >>>> [ 0.015317] ACPI: Core revision 20140828 >>>> [ 0.044598] ACPI: All ACPI Tables successfully acquired >>>> [ 0.126450] Security Framework initialized >>>> [ 0.130569] SELinux: Initializing. >>>> [ 0.135211] Dentry cache hash table entries: 2097152 (order: 12, >>>> 16777216 bytes) >>>> [ 0.145731] Inode-cache hash table entries: 1048576 (order: 11, >>>> 8388608 bytes) >>>> [ 0.154249] Mount-cache hash table entries: 32768 (order: 6, 262144 >>>> bytes) >>>> [ 0.161163] Mountpoint-cache hash table entries: 32768 (order: 6, >>>> 262144 bytes) >>>> [ 0.168731] Initializing cgroup subsys memory >>>> [ 0.173110] Initializing cgroup subsys devices >>>> [ 0.177570] Initializing cgroup subsys freezer >>>> [ 0.182026] Initializing cgroup subsys net_cls >>>> [ 0.186483] Initializing cgroup subsys blkio >>>> [ 0.190763] Initializing cgroup subsys perf_event >>>> [ 0.195479] Initializing cgroup subsys hugetlb >>>> [ 0.199955] CPU: Physical Processor ID: 0 >>>> [ 0.203972] CPU: Processor Core ID: 0 >>>> [ 0.207649] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' >>>> [ 0.207649] ENERGY_PERF_BIAS: View and update with >>>> x86_energy_perf_policy(8) >>>> [ 0.220704] mce: CPU supports 16 MCE banks >>>> [ 0.224832] CPU0: Thermal monitoring enabled (TM1) >>>> [ 0.229658] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 >>>> [ 0.229658] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 >>>> [ 0.241537] Freeing SMP alternatives memory: 24K (ffffffff81e80000 - >>>> ffffffff81e86000) >>>> [ 0.250740] ftrace: allocating 27051 entries in 106 pages >>>> [ 0.268137] dmar: Host address width 46 >>>> [ 0.271986] dmar: DRHD base: 0x000000dfffc000 flags: 0x1 >>>> [ 0.277314] dmar: IOMMU 0: reg_base_addr dfffc000 ver 1:0 cap >>>> d2078c106f0462 ecap f020fe >>>> [ 0.285423] dmar: RMRR base: 0x000000cba11000 end: 0x000000cba27fff >>>> [ 0.291703] dmar: ATSR flags: 0x0 >>>> [ 0.295122] IOAPIC id 0 under DRHD base 0xdfffc000 IOMMU 0 >>>> [ 0.300704] IOAPIC id 2 under DRHD base 0xdfffc000 IOMMU 0 >>>> [ 0.306281] HPET id 0 under DRHD base 0xdfffc000 >>>> [ 0.311011] Enabled IRQ remapping in xapic mode >>>> [ 0.316070] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >>>> [ 0.332096] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1603 0 @ 2.80GHz >>>> (fam: 06, model: 2d, stepping: 07) >>>> [ 0.341495] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge >>>> events, full-width counters, Intel PMU driver. >>>> [ 0.352047] perf_event_intel: PEBS disabled due to CPU errata, please >>>> upgrade microcode >>>> [ 0.360060] ... version: 3 >>>> [ 0.364081] ... bit width: 48 >>>> [ 0.368182] ... generic registers: 8 >>>> [ 0.372196] ... value mask: 0000ffffffffffff >>>> [ 0.377513] ... max period: 0000ffffffffffff >>>> [ 0.382829] ... fixed-purpose events: 3 >>>> [ 0.386842] ... event mask: 00000007000000ff >>>> [ 0.393368] x86: Booting SMP configuration: >>>> [ 0.397563] .... node #0, CPUs: #1 >>>> [ 0.414672] NMI watchdog: enabled on all CPUs, permanently consumes >>>> one hw-PMU counter. >>>> [ 0.422957] #2 #3 >>>> [ 0.451320] x86: Booted up 1 node, 4 CPUs >>>> [ 0.455539] smpboot: Total of 4 processors activated (22347.08 >>>> BogoMIPS) >>>> [ 0.466369] devtmpfs: initialized >>>> [ 0.472993] PM: Registering ACPI NVS region [mem >>>> 0xcb750000-0xcb7dafff] (569344 bytes) >>>> [ 0.480930] PM: Registering ACPI NVS region [mem >>>> 0xcbaad000-0xcbaaefff] (8192 bytes) >>>> [ 0.488689] PM: Registering ACPI NVS region [mem >>>> 0xcbabb000-0xcbacdfff] (77824 bytes) >>>> [ 0.496535] PM: Registering ACPI NVS region [mem >>>> 0xcbb56000-0xcbb5dfff] (32768 bytes) >>>> [ 0.504380] PM: Registering ACPI NVS region [mem >>>> 0xcbb71000-0xcbffffff] (4780032 bytes) >>>> [ 0.513294] atomic64_test: passed for x86-64 platform with CX8 and >>>> with SSE >>>> [ 0.520272] pinctrl core: initialized pinctrl subsystem >>>> [ 0.525549] RTC time: 9:52:43, date: 10/22/14 >>>> [ 0.530096] NET: Registered protocol family 16 >>>> [ 0.539573] cpuidle: using governor menu >>>> [ 0.543583] ACPI: bus type PCI registered >>>> [ 0.547608] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 >>>> [ 0.554133] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem >>>> 0xe0000000-0xefffffff] (base 0xe0000000) >>>> [ 0.563457] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in >>>> E820 >>>> [ 0.570548] PCI: Using configuration type 1 for base access >>>> [ 0.582492] ACPI: Added _OSI(Module Device) >>>> [ 0.586683] ACPI: Added _OSI(Processor Device) >>>> [ 0.591140] ACPI: Added _OSI(3.0 _SCP Extensions) >>>> [ 0.595849] ACPI: Added _OSI(Processor Aggregator Device) >>>> [ 0.608829] ACPI: Executed 1 blocks of module-level executable AML >>>> code >>>> [ 0.670857] ACPI: Interpreter enabled >>>> [ 0.674537] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep >>>> State [\_S1_] (20140828/hwxface-580) >>>> [ 0.683821] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep >>>> State [\_S2_] (20140828/hwxface-580) >>>> [ 0.693098] ACPI: (supports S0 S3 S4 S5) >>>> [ 0.697032] ACPI: Using IOAPIC for interrupt routing >>>> [ 0.702029] PCI: Using host bridge windows from ACPI; if necessary, >>>> use "pci=nocrs" and report a bug >>>> [ 0.711894] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored >>>> [ 0.725668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) >>>> [ 0.731866] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM >>>> ClockPM Segments MSI] >>>> [ 0.740165] acpi PNP0A08:00: _OSC: platform does not support >>>> [PCIeCapability] >>>> [ 0.747362] acpi PNP0A08:00: _OSC: not requesting control; platform >>>> does not support [PCIeCapability] >>>> [ 0.756597] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER >>>> PCIeCapability] >>>> [ 0.764356] acpi PNP0A08:00: _OSC: platform willing to grant >>>> [PCIeHotplug PME AER] >>>> [ 0.771942] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM >>>> [ 0.778808] PCI host bridge to bus 0000:00 >>>> [ 0.782921] pci_bus 0000:00: root bus resource [bus 00-7f] >>>> [ 0.788420] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] >>>> [ 0.794615] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] >>>> [ 0.800801] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] >>>> [ 0.806990] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] >>>> [ 0.813185] pci_bus 0000:00: root bus resource [mem >>>> 0x000a0000-0x000bffff] >>>> [ 0.820069] pci_bus 0000:00: root bus resource [mem >>>> 0x000c0000-0x000dffff] >>>> [ 0.826961] pci_bus 0000:00: root bus resource [mem >>>> 0xd4000000-0xdfffffff] >>>> [ 0.833851] pci_bus 0000:00: root bus resource [mem >>>> 0x3c0000000000-0x3c007fffffff] >>>> [ 0.841697] pci 0000:00:01.0: System wakeup disabled by ACPI >>>> [ 0.847513] pci 0000:00:02.0: System wakeup disabled by ACPI >>>> [ 0.853334] pci 0000:00:03.0: System wakeup disabled by ACPI >>>> [ 0.860117] pci 0000:00:19.0: System wakeup disabled by ACPI >>>> [ 0.865961] pci 0000:00:1a.0: System wakeup disabled by ACPI >>>> [ 0.871919] pci 0000:00:1c.0: Disabling UPDCR peer decodes >>>> [ 0.877420] pci 0000:00:1c.0: Enabling MPC IRBNCE >>>> [ 0.882135] pci 0000:00:1c.0: Intel PCH root port ACS workaround >>>> enabled >>>> [ 0.888874] pci 0000:00:1c.0: System wakeup disabled by ACPI >>>> [ 0.894757] pci 0000:00:1c.5: Enabling MPC IRBNCE >>>> [ 0.899477] pci 0000:00:1c.5: Intel PCH root port ACS workaround >>>> enabled >>>> [ 0.906212] pci 0000:00:1c.5: System wakeup disabled by ACPI >>>> [ 0.912015] pci 0000:00:1c.6: Enabling MPC IRBNCE >>>> [ 0.916734] pci 0000:00:1c.6: Intel PCH root port ACS workaround >>>> enabled >>>> [ 0.923473] pci 0000:00:1c.6: System wakeup disabled by ACPI >>>> [ 0.929281] pci 0000:00:1c.7: Enabling MPC IRBNCE >>>> [ 0.933995] pci 0000:00:1c.7: Intel PCH root port ACS workaround >>>> enabled >>>> [ 0.940733] pci 0000:00:1c.7: System wakeup disabled by ACPI >>>> [ 0.946579] pci 0000:00:1d.0: System wakeup disabled by ACPI >>>> [ 0.952347] pci 0000:00:1e.0: System wakeup disabled by ACPI >>>> [ 0.958516] pci 0000:00:01.0: PCI bridge to [bus 03] >>>> [ 0.965531] pci 0000:00:02.0: PCI bridge to [bus 05] >>>> [ 0.970582] pci 0000:00:03.0: PCI bridge to [bus 04] >>>> [ 0.975877] pci 0000:00:11.0: PCI bridge to [bus 02] >>>> [ 0.980920] pci 0000:00:1c.0: PCI bridge to [bus 01] >>>> [ 0.985995] pci 0000:00:1c.5: PCI bridge to [bus 06] >>>> [ 0.991048] pci 0000:00:1c.6: PCI bridge to [bus 07] >>>> [ 0.998052] pci 0000:00:1c.7: PCI bridge to [bus 08] >>>> [ 1.003382] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive >>>> decode) >>>> [ 1.010649] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) >>>> [ 1.016843] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM >>>> ClockPM Segments MSI] >>>> [ 1.025142] acpi PNP0A08:01: _OSC: platform does not support >>>> [PCIeCapability] >>>> [ 1.032340] acpi PNP0A08:01: _OSC: not requesting control; platform >>>> does not support [PCIeCapability] >>>> [ 1.041569] acpi PNP0A08:01: _OSC: OS requested [PCIeHotplug PME AER >>>> PCIeCapability] >>>> [ 1.049329] acpi PNP0A08:01: _OSC: platform willing to grant >>>> [PCIeHotplug PME AER] >>>> [ 1.056914] acpi PNP0A08:01: _OSC failed (AE_SUPPORT); disabling ASPM >>>> [ 1.063547] PCI host bridge to bus 0000:80 >>>> [ 1.067655] pci_bus 0000:80: root bus resource [bus 80-ff] >>>> [ 1.073154] pci_bus 0000:80: root bus resource [io 0x0000-0x03af] >>>> [ 1.079347] pci_bus 0000:80: root bus resource [io 0x03e0-0x0cf7] >>>> [ 1.085541] pci_bus 0000:80: root bus resource [mem >>>> 0x000c0000-0x000dffff] >>>> [ 1.092508] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 >>>> 14 15) >>>> [ 1.099814] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 >>>> 14 15) >>>> [ 1.107112] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 >>>> 14 15) >>>> [ 1.114227] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 >>>> 14 15) >>>> [ 1.121333] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 >>>> 14 15) >>>> [ 1.128632] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 >>>> 14 15) *0 >>>> [ 1.136129] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 >>>> 14 15) >>>> [ 1.143428] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 >>>> 14 15) >>>> [ 1.151240] ACPI: Enabled 2 GPEs in block 00 to 3F >>>> [ 1.156190] vgaarb: setting as boot device: PCI:0000:05:00.0 >>>> [ 1.161855] vgaarb: device added: >>>> PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none >>>> [ 1.169955] vgaarb: loaded >>>> [ 1.172673] vgaarb: bridge control possible 0000:05:00.0 >>>> [ 1.178057] SCSI subsystem initialized >>>> [ 1.181883] ACPI: bus type USB registered >>>> [ 1.185921] usbcore: registered new interface driver usbfs >>>> [ 1.191422] usbcore: registered new interface driver hub >>>> [ 1.196752] usbcore: registered new device driver usb >>>> [ 1.201901] PCI: Using ACPI for IRQ routing >>>> [ 1.211957] PCI: Discovered peer bus ff >>>> [ 1.215828] PCI host bridge to bus 0000:ff >>>> [ 1.219931] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] >>>> [ 1.226124] pci_bus 0000:ff: root bus resource [mem >>>> 0x00000000-0x3fffffffffff] >>>> [ 1.233353] pci_bus 0000:ff: No busn resource found for root bus, >>>> will use [bus ff-ff] >>>> [ 1.243478] NetLabel: Initializing >>>> [ 1.246889] NetLabel: domain hash size = 128 >>>> [ 1.251259] NetLabel: protocols = UNLABELED CIPSOv4 >>>> [ 1.256250] NetLabel: unlabeled traffic allowed by default >>>> [ 1.261908] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 >>>> [ 1.268256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter >>>> [ 1.276129] Switched to clocksource hpet >>>> [ 1.285817] pnp: PnP ACPI init >>>> [ 1.288997] system 00:00: [mem 0xfc000000-0xfcffffff window] has been >>>> reserved >>>> [ 1.296237] system 00:00: [mem 0xfd000000-0xfdffffff window] has been >>>> reserved >>>> [ 1.303472] system 00:00: [mem 0xfe000000-0xfeafffff window] has been >>>> reserved >>>> [ 1.310708] system 00:00: [mem 0xfeb00000-0xfebfffff window] has been >>>> reserved >>>> [ 1.317948] system 00:00: [mem 0xfed00400-0xfed3ffff window] could >>>> not be reserved >>>> [ 1.325533] system 00:00: [mem 0xfed45000-0xfedfffff window] has been >>>> reserved >>>> [ 1.332772] system 00:00: [mem 0xdffff000-0xdfffffff window] has been >>>> reserved >>>> [ 1.340129] system 00:01: [io 0x0620-0x063f] has been reserved >>>> [ 1.346067] system 00:01: [io 0x0610-0x061f] has been reserved >>>> [ 1.352170] system 00:05: [io 0x04d0-0x04d1] has been reserved >>>> [ 1.358421] system 00:07: [io 0x0400-0x0453] could not be reserved >>>> [ 1.364706] system 00:07: [io 0x0458-0x047f] has been reserved >>>> [ 1.370643] system 00:07: [io 0x1180-0x119f] has been reserved >>>> [ 1.376577] system 00:07: [io 0x0500-0x057f] has been reserved >>>> [ 1.382514] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been >>>> reserved >>>> [ 1.389143] system 00:07: [mem 0xfec00000-0xfecfffff] could not be >>>> reserved >>>> [ 1.396122] system 00:07: [mem 0xfed08000-0xfed08fff] has been >>>> reserved >>>> [ 1.402753] system 00:07: [mem 0xff000000-0xffffffff] has been >>>> reserved >>>> [ 1.409443] system 00:08: [io 0x0454-0x0457] has been reserved >>>> [ 1.415680] system 00:09: [mem 0xfed40000-0xfed44fff] has been >>>> reserved >>>> [ 1.422312] pnp: PnP ACPI: found 10 devices >>>> [ 1.432845] pci 0000:00:01.0: PCI bridge to [bus 03] >>>> [ 1.437830] pci 0000:00:02.0: PCI bridge to [bus 05] >>>> [ 1.442810] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] >>>> [ 1.448919] pci 0000:00:02.0: bridge window [mem >>>> 0xd6000000-0xd70fffff] >>>> [ 1.455723] pci 0000:00:02.0: bridge window [mem >>>> 0xd8000000-0xddffffff 64bit pref] >>>> [ 1.463486] pci 0000:00:03.0: PCI bridge to [bus 04] >>>> [ 1.468475] pci 0000:00:11.0: PCI bridge to [bus 02] >>>> [ 1.473454] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] >>>> [ 1.479569] pci 0000:00:11.0: bridge window [mem >>>> 0xde400000-0xde8fffff 64bit pref] >>>> [ 1.487329] pci 0000:00:1c.0: PCI bridge to [bus 01] >>>> [ 1.492312] pci 0000:00:1c.5: PCI bridge to [bus 06] >>>> [ 1.497306] pci 0000:00:1c.6: PCI bridge to [bus 07] >>>> [ 1.502295] pci 0000:00:1c.7: PCI bridge to [bus 08] >>>> [ 1.507276] pci 0000:00:1c.7: bridge window [mem >>>> 0xd7200000-0xd72fffff] >>>> [ 1.514085] pci 0000:00:1e.0: PCI bridge to [bus 09] >>>> [ 1.519064] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] >>>> [ 1.525176] pci 0000:00:1e.0: bridge window [mem >>>> 0xd7100000-0xd71fffff] >>>> [ 1.532053] NET: Registered protocol family 2 >>>> [ 1.536629] TCP established hash table entries: 131072 (order: 8, >>>> 1048576 bytes) >>>> [ 1.544261] TCP bind hash table entries: 65536 (order: 8, 1048576 >>>> bytes) >>>> [ 1.551132] TCP: Hash tables configured (established 131072 bind >>>> 65536) >>>> [ 1.557790] TCP: reno registered >>>> [ 1.561057] UDP hash table entries: 8192 (order: 6, 262144 bytes) >>>> [ 1.567222] UDP-Lite hash table entries: 8192 (order: 6, 262144 >>>> bytes) >>>> [ 1.573857] NET: Registered protocol family 1 >>>> [ 1.620837] Unpacking initramfs... >>>> [ 2.695524] Freeing initrd memory: 73444K (ffff88002f07e000 - >>>> ffff880033837000) >>>> [ 2.702941] IOMMU 0 0xdfffc000: using Queued invalidation >>>> [ 2.708357] IOMMU: Setting RMRR: >>>> [ 2.711609] IOMMU: Setting identity map for device 0000:00:1a.0 >>>> [0xcba11000 - 0xcba27fff] >>>> [ 2.719832] IOMMU: Setting identity map for device 0000:00:1d.0 >>>> [0xcba11000 - 0xcba27fff] >>>> [ 2.728048] IOMMU: Prepare 0-16MiB unity mapping for LPC >>>> [ 2.733387] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 >>>> - 0xffffff] >>>> [ 2.740810] PCI-DMA: Intel(R) Virtualization Technology for Directed >>>> I/O >>>> [ 2.751258] RAPL PMU detected, hw unit 2^-16 Joules, API unit is >>>> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer >>>> [ 2.762183] AVX version of gcm_enc/dec engaged. >>>> [ 2.766728] AES CTR mode by8 optimization enabled >>>> [ 2.773059] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) >>>> [ 2.779868] futex hash table entries: 1024 (order: 4, 65536 bytes) >>>> [ 2.786077] Initialise system trusted keyring >>>> [ 2.790469] audit: initializing netlink subsys (disabled) >>>> [ 2.795898] audit: type=2000 audit(1413971563.899:1): initialized >>>> [ 2.802401] HugeTLB registered 2 MB page size, pre-allocated 0 pages >>>> [ 2.810069] zpool: loaded >>>> [ 2.812707] zbud: loaded >>>> [ 2.815416] VFS: Disk quotas dquot_6.5.2 >>>> [ 2.819385] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >>>> [ 2.826151] msgmni has been set to 31563 >>>> [ 2.830137] Key type big_key registered >>>> [ 2.834713] alg: No test for stdrng (krng) >>>> [ 2.838832] NET: Registered protocol family 38 >>>> [ 2.843302] Key type asymmetric registered >>>> [ 2.847417] Asymmetric key parser 'x509' registered >>>> [ 2.852342] Block layer SCSI generic (bsg) driver version 0.4 loaded >>>> (major 252) >>>> [ 2.859796] io scheduler noop registered >>>> [ 2.863735] io scheduler deadline registered >>>> [ 2.868059] io scheduler cfq registered (default) >>>> [ 2.873723] ioapic: probe of 0000:00:05.4 failed with error -22 >>>> [ 2.879668] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >>>> [ 2.885265] pciehp: PCI Express Hot Plug Controller Driver version: >>>> 0.4 >>>> [ 2.892141] input: Power Button as >>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 >>>> [ 2.900514] ACPI: Power Button [PWRB] >>>> [ 2.904222] input: Power Button as >>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >>>> [ 2.911635] ACPI: Power Button [PWRF] >>>> [ 2.919209] GHES: HEST is not enabled! >>>> [ 2.923062] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >>>> [ 2.949936] serial 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = >>>> 115200) is a 16550A >>>> [ 2.978817] serial 0000:00:16.3: ttyS1 at I/O 0xf060 (irq = 17, >>>> base_baud = 115200) is a 16550A >>>> [ 2.987842] Non-volatile memory driver v1.3 >>>> [ 2.992041] Linux agpgart interface v0.103 >>>> [ 3.007061] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps >>>> 0x5 impl RAID mode >>>> [ 3.015174] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems >>>> sxs apst >>>> [ 3.024682] scsi host0: ahci >>>> [ 3.027959] scsi host1: ahci >>>> [ 3.031213] scsi host2: ahci >>>> [ 3.034301] scsi host3: ahci >>>> [ 3.037390] scsi host4: ahci >>>> [ 3.040474] scsi host5: ahci >>>> [ 3.043399] ata1: SATA max UDMA/133 abar m2048 at 0xd7348000 port >>>> 0xd7348100 irq 27 >>>> [ 3.050811] ata2: DUMMY >>>> [ 3.053269] ata3: SATA max UDMA/133 abar m2048 at 0xd7348000 port >>>> 0xd7348200 irq 27 >>>> [ 3.060681] ata4: DUMMY >>>> [ 3.063140] ata5: DUMMY >>>> [ 3.065598] ata6: DUMMY >>>> [ 3.068158] libphy: Fixed MDIO Bus: probed >>>> [ 3.072380] xhci_hcd 0000:08:00.0: xHCI Host Controller >>>> [ 3.077671] xhci_hcd 0000:08:00.0: new USB bus registered, assigned >>>> bus number 1 >>>> [ 3.085428] usb usb1: New USB device found, idVendor=1d6b, >>>> idProduct=0002 >>>> [ 3.092229] usb usb1: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 3.099465] usb usb1: Product: xHCI Host Controller >>>> [ 3.104358] usb usb1: Manufacturer: Linux 3.18.0-rc1+ xhci-hcd >>>> [ 3.110205] usb usb1: SerialNumber: 0000:08:00.0 >>>> [ 3.115015] hub 1-0:1.0: USB hub found >>>> [ 3.118792] hub 1-0:1.0: 4 ports detected >>>> [ 3.122926] xhci_hcd 0000:08:00.0: xHCI Host Controller >>>> [ 3.128302] xhci_hcd 0000:08:00.0: new USB bus registered, assigned >>>> bus number 2 >>>> [ 3.135773] usb usb2: New USB device found, idVendor=1d6b, >>>> idProduct=0003 >>>> [ 3.142579] usb usb2: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 3.149816] usb usb2: Product: xHCI Host Controller >>>> [ 3.154708] usb usb2: Manufacturer: Linux 3.18.0-rc1+ xhci-hcd >>>> [ 3.160554] usb usb2: SerialNumber: 0000:08:00.0 >>>> [ 3.165334] hub 2-0:1.0: USB hub found >>>> [ 3.169106] hub 2-0:1.0: 4 ports detected >>>> [ 3.173250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) >>>> Driver >>>> [ 3.179798] ehci-pci: EHCI PCI platform driver >>>> [ 3.184350] ehci-pci 0000:00:1a.0: EHCI Host Controller >>>> [ 3.189724] ehci-pci 0000:00:1a.0: new USB bus registered, assigned >>>> bus number 3 >>>> [ 3.197172] ehci-pci 0000:00:1a.0: debug port 2 >>>> [ 3.205655] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd734b000 >>>> [ 3.217315] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >>>> [ 3.223146] usb usb3: New USB device found, idVendor=1d6b, >>>> idProduct=0002 >>>> [ 3.229948] usb usb3: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 3.237185] usb usb3: Product: EHCI Host Controller >>>> [ 3.242079] usb usb3: Manufacturer: Linux 3.18.0-rc1+ ehci_hcd >>>> [ 3.247926] usb usb3: SerialNumber: 0000:00:1a.0 >>>> [ 3.252761] hub 3-0:1.0: USB hub found >>>> [ 3.256529] hub 3-0:1.0: 3 ports detected >>>> [ 3.260744] ehci-pci 0000:00:1d.0: EHCI Host Controller >>>> [ 3.266118] ehci-pci 0000:00:1d.0: new USB bus registered, assigned >>>> bus number 4 >>>> [ 3.273632] ehci-pci 0000:00:1d.0: debug port 2 >>>> [ 3.282093] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd734a000 >>>> [ 3.293363] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >>>> [ 3.299159] usb usb4: New USB device found, idVendor=1d6b, >>>> idProduct=0002 >>>> [ 3.305964] usb usb4: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 3.313200] usb usb4: Product: EHCI Host Controller >>>> [ 3.318089] usb usb4: Manufacturer: Linux 3.18.0-rc1+ ehci_hcd >>>> [ 3.323938] usb usb4: SerialNumber: 0000:00:1d.0 >>>> [ 3.328701] hub 4-0:1.0: USB hub found >>>> [ 3.332467] hub 4-0:1.0: 3 ports detected >>>> [ 3.336603] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>>> [ 3.342807] ohci-pci: OHCI PCI platform driver >>>> [ 3.347277] uhci_hcd: USB Universal Host Controller Interface driver >>>> [ 3.353695] usbcore: registered new interface driver usbserial >>>> [ 3.359545] usbcore: registered new interface driver >>>> usbserial_generic >>>> [ 3.366097] usbserial: USB Serial support registered for generic >>>> [ 3.372146] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] >>>> at 0x60,0x64 irq 1,12 >>>> [ 3.374482] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>>> [ 3.374514] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >>>> [ 3.392876] ata1.00: ATA-8: ST31000524AS, HP64, max UDMA/100 >>>> [ 3.395363] serio: i8042 KBD port at 0x60,0x64 irq 1 >>>> [ 3.395367] serio: i8042 AUX port at 0x60,0x64 irq 12 >>>> [ 3.395501] mousedev: PS/2 mouse device common for all mice >>>> [ 3.395855] rtc_cmos 00:04: RTC can wake from S4 >>>> [ 3.396045] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 >>>> [ 3.396081] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes >>>> nvram, hpet irqs >>>> [ 3.396138] device-mapper: uevent: version 1.0.3 >>>> [ 3.396197] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) >>>> initialised: dm-devel at redhat.com >>>> [ 3.396253] Intel P-state driver initializing. >>>> [ 3.400075] hidraw: raw HID events driver (C) Jiri Kosina >>>> [ 3.400323] usbcore: registered new interface driver usbhid >>>> [ 3.400324] usbhid: USB HID core driver >>>> [ 3.400365] oprofile: using NMI interrupt. >>>> [ 3.400381] drop_monitor: Initializing network drop monitor service >>>> [ 3.400526] ip_tables: (C) 2000-2006 Netfilter Core Team >>>> [ 3.408605] TCP: cubic registered >>>> [ 3.408610] Initializing XFRM netlink socket >>>> [ 3.408703] NET: Registered protocol family 10 >>>> [ 3.408877] mip6: Mobile IPv6 >>>> [ 3.408880] NET: Registered protocol family 17 >>>> [ 3.409260] Loading compiled-in X.509 certificates >>>> [ 3.410068] Loaded X.509 cert 'Magrathea: Glacier signing key: >>>> d196e1366cc7c91295775c1e77c548314c3ad291' >>>> [ 3.410074] registered taskstats version 1 >>>> [ 3.410807] Magic number: 2:969:879 >>>> [ 3.414189] rtc_cmos 00:04: setting system clock to 2014-10-22 >>>> 09:52:46 UTC (1413971566) >>>> [ 3.530379] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth >>>> 31/32) >>>> [ 3.530393] ata3.00: ATAPI: hp CDDVDW SH-216ALN, HA5A, max >>>> UDMA/100 >>>> [ 3.530400] usb 1-1: new high-speed USB device number 2 using >>>> xhci_hcd >>>> [ 3.551737] ata1.00: configured for UDMA/100 >>>> [ 3.556094] ata3.00: configured for UDMA/100 >>>> [ 3.556207] scsi 0:0:0:0: Direct-Access ATA ST31000524AS >>>> HP64 PQ: 0 ANSI: 5 >>>> [ 3.556400] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: >>>> (1.00 TB/931 GiB) >>>> [ 3.556426] sd 0:0:0:0: Attached scsi generic sg0 type 0 >>>> [ 3.556428] sd 0:0:0:0: [sda] Write Protect is off >>>> [ 3.556441] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>>> enabled, doesn't support DPO or FUA >>>> [ 3.596437] scsi 2:0:0:0: CD-ROM hp CDDVDW SH-216ALN >>>> HA5A PQ: 0 ANSI: 5 >>>> [ 3.628854] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram >>>> cd/rw xa/form2 cdda tray >>>> [ 3.631763] usb 3-1: new high-speed USB device number 2 using >>>> ehci-pci >>>> [ 3.644045] cdrom: Uniform CD-ROM driver Revision: 3.20 >>>> [ 3.649740] sr 2:0:0:0: Attached scsi generic sg1 type 5 >>>> [ 3.652402] sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 > >>>> [ 3.652800] usb 4-1: new high-speed USB device number 2 using >>>> ehci-pci >>>> [ 3.653249] sd 0:0:0:0: [sda] Attached SCSI disk >>>> [ 3.657953] usb 1-1: New USB device found, idVendor=0424, >>>> idProduct=2412 >>>> [ 3.657955] usb 1-1: New USB device strings: Mfr=0, Product=0, >>>> SerialNumber=0 >>>> [ 3.680553] hub 1-1:1.0: USB hub found >>>> [ 3.680899] hub 1-1:1.0: 2 ports detected >>>> [ 3.695764] Freeing unused kernel memory: 1428K (ffffffff81d1b000 - >>>> ffffffff81e80000) >>>> [ 3.703629] Write protecting the kernel read-only data: 12288k >>>> [ 3.712879] Freeing unused kernel memory: 780K (ffff88000173d000 - >>>> ffff880001800000) >>>> [ 3.723879] Freeing unused kernel memory: 896K (ffff880001b20000 - >>>> ffff880001c00000) >>>> [ 3.736460] systemd[1]: systemd 208 running in system mode. (+PAM >>>> +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) >>>> [ 3.746566] usb 3-1: New USB device found, idVendor=8087, >>>> idProduct=0024 >>>> [ 3.746568] usb 3-1: New USB device strings: Mfr=0, Product=0, >>>> SerialNumber=0 >>>> [ 3.746943] hub 3-1:1.0: USB hub found >>>> [ 3.747187] hub 3-1:1.0: 6 ports detected >>>> [ 3.754912] tsc: Refined TSC clocksource calibration: 2793.268 MHz >>>> [ 3.777155] systemd[1]: Running in initial RAM disk. >>>> >>>> Welcome to Fedora 20 (Heisenbug) dracut-038-14.git20140724.fc22 >>>> (Initramfs)! >>>> >>>> [ 3.789762] usb 4-1: New USB device found, idVendor=8087, >>>> idProduct=0024 >>>> [ 3.797152] usb 4-1: New USB device strings: Mfr=0, Product=0, >>>> SerialNumber=0 >>>> [ 3.804417] systemd[1]: No hostname configured. >>>> [ 3.804782] hub 4-1:1.0: USB hub found >>>> [ 3.804980] hub 4-1:1.0: 8 ports detected >>>> [ 3.816768] systemd[1]: Set hostname to <localhost>. >>>> [ 3.821792] random: systemd urandom read with 27 bits of entropy >>>> available >>>> [ 3.828692] systemd[1]: Initializing machine ID from random >>>> generator. >>>> [ 3.886360] systemd[1]: Expecting device >>>> dev-disk-by\x2duuid-f170152e\x2dde83\x2d46ee\x2d9546\x2d8ccd53f9753b.device... >>>> Expecting device >>>> dev-disk-by\x2duuid-f170152e\x2dde8...9753b.device... >>>> [ 3.906204] systemd[1]: Starting -.slice. >>>> [ OK ] Created slice -.slice. >>>> [ 3.915160] systemd[1]: Created slice -.slice. >>>> [ 3.919638] systemd[1]: Starting System Slice. >>>> [ OK ] Created slice System Slice. >>>> [ 3.931155] systemd[1]: Created slice System Slice. >>>> [ 3.936080] systemd[1]: Starting Slices. >>>> [ OK ] Reached target Slices. >>>> [ 3.944167] systemd[1]: Reached target Slices. >>>> [ 3.948650] systemd[1]: Starting Timers. >>>> [ OK ] Reached target Timers. >>>> [ 3.957186] systemd[1]: Reached target Timers. >>>> [ 3.961689] systemd[1]: Starting Journal Socket. >>>> [ 3.961702] usb 1-1.1: new low-speed USB device number 3 using >>>> xhci_hcd >>>> [ OK ] Listening on Journal Socket. >>>> [ 3.979241] systemd[1]: Listening on Journal Socket. >>>> [ 3.984302] systemd[1]: Started dracut ask for additional cmdline >>>> parameters. >>>> [ 3.991590] systemd[1]: Starting dracut cmdline hook... >>>> Starting dracut cmdline hook... >>>> [ 4.001628] systemd[1]: Starting Apply Kernel Variables... >>>> Starting Apply Kernel Variables... >>>> [ 4.013470] systemd[1]: Starting Journal Service... >>>> Starting Journal Service... >>>> [ OK ] Started Journal Service. >>>> [ 4.028247] systemd[1]: Started Journal Service. >>>> [ OK ] Reached target Encrypted Volumes. >>>> Starting Create list of required static device nodes...rrent >>>> kernel... >>>> Starting Setup Virtual Console... >>>> [ OK ] Listening on udev Kernel Socket. >>>> [ OK ] Listening on udev Control Socket. >>>> [ OK ] Reached target Sockets. >>>> [ OK ] Reached target Swap. >>>> [ OK ] Reached target Local File Systems. >>>> [ 4.081629] usb 1-1.1: New USB device found, idVendor=03f0, >>>> idProduct=0324 >>>> [ 4.088528] usb 1-1.1: New USB device strings: Mfr=1, Product=2, >>>> SerialNumber=0 >>>> [ 4.095861] usb 1-1.1: Product: HP Basic USB Keyboard >>>> [ 4.100933] usb 1-1.1: Manufacturer: Lite-On Technology Corp. >>>> [ OK [ 4.106797] usb 1-1.1: ep 0x81 - rounding interval to 64 >>>> microframes, ep desc says 80 microframes >>>> ] Started Apply Kernel Variables. >>>> [ OK ] Started dracut cmdline hook. >>>> [ OK ] Started Create list of required static device nodes ...current[ >>>> 4.133538] input: Lite-On Technology Corp. HP Basic USB Keyboard as >>>> /devices/pci0000:00/005 >>>> kernel. >>>> [ 4.149253] hid-generic 0003:03F0:0324.0001: input,hidraw0: USB HID >>>> v1.10 Keyboard [Lite-On Technology Corp. HP Basic USB Keyboard] on >>>> usb-0000:08:00.0-1.1/input0 >>>> [ OK ] Started Setup Virtual Console. >>>> Starting Create static device nodes in /dev... >>>> Starting dracut pre-udev hook... >>>> [ OK ] Started Create static device nodes in /dev. >>>> [ 4.214568] RPC: Registered named UNIX socket transport module. >>>> [ 4.220509] RPC: Registered udp transport module. >>>> [ 4.225233] RPC: Registered tcp transport module. >>>> [ 4.229959] RPC: Registered tcp NFSv4.1 backchannel transport module. >>>> [ 4.238837] usb 1-1.2: new low-speed USB device number 4 using >>>> xhci_hcd >>>> [ OK ] Started dracut pre-udev hook. >>>> Starting udev Kernel Device Manager... >>>> [ 4.324559] systemd-udevd[295]: starting version 208 >>>> [ OK ] Started udev Kernel Device Manager. >>>> Starting dracut pre-trigger hook... >>>> [ 4.340679] usb 1-1.2: New USB device found, idVendor=03f0, >>>> idProduct=0b4a >>>> [ 4.347574] usb 1-1.2: New USB device strings: Mfr=1, Product=2, >>>> SerialNumber=0 >>>> [ 4.354903] usb 1-1.2: Product: USB Optical Mouse >>>> [ 4.359620] usb 1-1.2: Manufacturer: Logitech >>>> [ 4.364104] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, >>>> ep desc says 80 microframes >>>> [ 4.388938] input: Logitech USB Optical Mouse as >>>> /devices/pci0000:00/0000:00:1c.7/0000:08:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:0B4A.0002/input/input6 >>>> [ 4.402909] hid-generic 0003:03F0:0B4A.0002: input,hidraw1: USB HID >>>> v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:08:00.0-1.2/input0 >>>> [ OK ] Started dracut pre-trigger hook. >>>> Starting udev Coldplug all Devices... >>>> [ OK ] Started udev Coldplug all Devices. >>>> Starting dracut initqueue hook... >>>> [ OK ] Reached target System Initialization. >>>> Starting Show Plymouth Boot Screen... >>>> [ 4.512249] wmi: Mapper loaded >>>> [ 4.518629] pps_core: LinuxPPS API ver. 1 registered >>>> [ 4.523615] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 >>>> Rodolfo Giometti <giometti at linux.it> >>>> [ 4.534406] [drm] Initialized drm 1.1.0 20060810 >>>> [ 4.539099] PTP clock support registered >>>> [ 4.543082] scsi host6: ata_generic >>>> [ 4.546671] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 >>>> [ 4.553222] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007) >>>> [ 4.559598] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k >>>> [ 4.559609] isci 0000:02:00.0: driver configured for rev: 5 silicon >>>> [ 4.559632] isci 0000:02:00.0: OEM SAS parameters (version: 1.3) >>>> loaded (firmware) >>>> [ 4.559866] tulip: tulip_init_one: Enabled WOL support for AN983B >>>> [ 4.560585] tulip0: MII transceiver #1 config 3100 status 7849 >>>> advertising 05e1 >>>> [ 4.568024] net eth0: ADMtek Comet rev 17 at MMIO 0xd7121000, >>>> 00:b0:c0:06:70:90, IRQ 20 >>>> [ 4.570776] scsi host7: ata_generic >>>> [ 4.570822] ata7: PATA max UDMA/100 cmd 0xf0b0 ctl 0xf0a0 bmdma >>>> 0xf070 irq 18 >>>> [ 4.570823] ata8: PATA max UDMA/100 cmd 0xf090 ctl 0xf080 bmdma >>>> 0xf078 irq 18 >>>> [ 4.593813] isci 0000:02:00.0: SCU controller 0: phy 3-0 cables: >>>> {short, short, short, short} >>>> [ 4.596196] scsi host8: isci >>>> [ 4.606431] tulip 0000:09:04.0 p6p1: renamed from eth0 >>>> [ 4.635280] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. >>>> [ 4.641389] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) >>>> set to dynamic conservative mode >>>> [ 4.652422] alg: No test for crc32 (crc32-pclmul) >>>> [ 4.680990] systemd-udevd[389]: renamed network interface eth0 to >>>> p6p1 >>>> [ 4.703965] firewire_ohci 0000:09:05.0: added OHCI v1.0 device as >>>> card 0, 8 IR + 8 IT contexts, quirks 0x0 >>>> [ 4.772777] Switched to clocksource tsc >>>> [ 4.843434] e1000e 0000:00:19.0 eth0: registered PHC clock >>>> [ 4.848941] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) >>>> 80:c1:6e:f8:9f:92 >>>> [ 4.856881] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network >>>> Connection >>>> [ 4.863808] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: >>>> 0100FF-0FF >>>> [ 4.878631] e1000e 0000:00:19.0 em1: renamed from eth0 >>>> [ 4.900219] systemd-udevd[371]: renamed network interface eth0 to em1 >>>> [ 5.142991] random: nonblocking pool is initialized >>>> [ 5.214656] firewire_core 0000:09:05.0: created device fw0: GUID >>>> 0060b000008cec98, S400 >>>> Mounting Configuration File System... >>>> [ OK ] Mounted Configuration File System. >>>> [ OK ] Found device ST31000524AS. >>>> [ OK ] Started dracut initqueue hook. >>>> Starting drac[ 5.688241] EXT4-fs (sda2): INFO: recovery >>>> required on readonly filesystem >>>> [ 5.695372] EXT4-fs (sda2): write access will be enabled during >>>> recovery >>>> ut pre-mount hook... >>>> [ OK ] Reached target Remote File Systems (Pre). >>>> [ OK ] Reached target Remote File Systems. >>>> [ OK ] Started Show Plymouth Boot Screen. >>>> [ OK ] Reached target Paths. >>>> [ OK ] Reached target Basic System. >>>> [ OK ] Started dracut pre-mount hook. >>>> Mounting /sysroot... >>>> [ 8.745808] EXT4-fs (sda2): orphan cleanup on readonly fs >>>> [ 8.751420] EXT4-fs (sda2): 2 orphan inodes deleted >>>> [ 8.756331] EXT4-fs (sda2): recovery complete >>>> [ 8.852253] EXT4-fs (sda2): mounted filesystem with ordered data >>>> mode. Opts: (null) >>>> [ OK ] Mounted /sysroot. >>>> [ OK ] Reached target Initrd Root File System. >>>> Starting Reload Configuration from the Real Root... >>>> [ OK ] Started Reload Configuration from the Real Root. >>>> [ OK ] Reached target Initrd File Systems. >>>> [ OK ] Reached target Initrd Default Target. >>>> [ 9.228197] systemd-journald[151]: Received SIGTERM >>>> [ 10.038168] SELinux: Permission audit_read in class capability2 not >>>> defined in policy. >>>> [ 10.046190] SELinux: the above unknown classes and permissions will >>>> be allowed >>>> [ 10.062413] audit: type=1403 audit(1413971573.143:2): policy loaded >>>> auid=4294967295 ses=4294967295 >>>> [ 10.076427] systemd[1]: Successfully loaded SELinux policy in >>>> 215.463ms. >>>> [ 10.287501] systemd[1]: Relabelled /dev and /run in 31.807ms. >>>> >>>> Welcome to Fedora 20 (Heisenbug)! >>>> >>>> [ OK ] Stopped Switch Root. >>>> [ OK ] Stopped target Switch Root. >>>> [ OK ] Stopped target Initrd File Systems. >>>> [ OK ] Stopped target Initrd Root File System. >>>> [ OK ] Created slice User and Session Slice. >>>> [ OK ] Created slice system-serial\x2dgetty.slice. >>>> Expecting device dev-ttyS0.device... >>>> [ OK ] Created slice system-getty.slice. >>>> [ OK ] Reached target Remote File Systems. >>>> Starting Collect Read-Ahead Data... >>>> Starting Replay Read-Ahead Data... >>>> [ OK ] Reached target Slices. >>>> [ OK ] Listening on Delayed Shutdown Socket. >>>> [[ 11.691991] systemd-readahead[518]: Bumped block_nr parameter of 8:0 >>>> to 20480. This is a temporary hack and should be removed one day. >>>> OK ] Listening on /dev/initctl Compatibility Named Pipe. >>>> Mounting Huge Pages File System... >>>> Starting Create list of required static device nodes...rrent >>>> kernel... >>>> Mounting Debug File System... >>>> [ OK ] Set up automount Arbitrary Executable File Formats F...utomount >>>> Point. >>>> Mounting POSIX Message Queue File System... >>>> [ OK ] Listening on udev Kernel Socket. >>>> [ OK ] Listening on udev Control Socket. >>>> Starting udev Coldplug all Devices... >>>> [ OK ] Listening on LVM2 metadata daemon socket. >>>> [ OK ] Listening on Device-mapper event daemon FIFOs. >>>> Starting Monitoring of LVM2 mirrors, snapshots etc. ...ress >>>> polling... >>>> Expecting device >>>> dev-disk-by\x2duuid-3429ef24\x2d72c...30516.device... >>>> Mounting Temporary Directory... >>>> Expecting device >>>> dev-disk-by\x2duuid-06476532\x2d367...e5455.device... >>>> Expecting device dev-sda5.device... >>>> [ OK ] Started Collect Read-Ahead Data. >>>> [ OK ] Started Replay Read-Ahead Data. >>>> [ OK ] Started Create list of required static device nodes ...current >>>> kernel. >>>> Starting Create static device nodes in /dev... >>>> Starting Apply Kernel Variables... >>>> Starting Set Up Additional Binary Formats... >>>> Starting File System Check on Root Device... >>>> [ OK ] Stopped Trigger Flushing of Journal to Persistent Storage. >>>> Stopping Journal Service... >>>> [ OK ] Stopped Journal Service. >>>> Starting Journal Service... >>>> [ OK ] Started Journal Service. >>>> [ OK ] Started udev Coldplug all Devices. >>>> Starting udev Wait for Complete Device Initialization... >>>> [ OK ] Mounted Huge Pages File System. >>>> [ OK ] Mounted Debug File System. >>>> [ OK ] Mounted POSIX Message Queue File System. >>>> [ OK ] Mounted Temporary Directory. >>>> [ 12.251281] systemd[1]: Got automount request for >>>> /proc/sys/fs/binfmt_misc, triggered by 532 (systemd-binfmt) >>>> Mounting Arbitrary Executable File Formats File System... >>>> Starting LVM2 metadata daemon... >>>> [ OK ] Started LVM2 metadata daemon. >>>> [ OK ] Started File System Check on Root Device. >>>> Starting Remount Root and Kernel File Systems... >>>> [ OK ] Started Apply Kernel Variables. >>>> [ 12.698407] EXT4-fs (sda2): re-mounted. Opts: (null) >>>> [ OK ] Started Remount Root and Kernel File Systems. >>>> Starting Import network configuration from initramfs... >>>> Starting Configure read-only root support... >>>> Starting Load/Save Random Seed... >>>> [ 11.835335] systemd-fsck[533]: /dev/sda2: clean, 764767/12804096 >>>> files, 29923436/51200000 blocks >>>> [ OK ] Started Create static device nodes in /dev. >>>> Starting udev Kernel Device Manager... >>>> [ OK ] Reached target Local File Systems (Pre). >>>> [ OK ] Started Configure read-only root support. >>>> [ OK ] Started Load/Save Random Seed. >>>> [ 13.150173] systemd-udevd[557]: starting version 208 >>>> [ OK ] Started udev Kernel Device Manager. >>>> [ OK ] Mounted Arbitrary Executable File Formats File System. >>>> [ OK ] Started Import network configuration from initramfs. >>>> [ OK ] Started Set Up Additional Binary Formats. >>>> [ OK ] Started Monitoring of LVM2 mirrors, snapshots etc. u...ogress >>>> polling. >>>> [ 13.727411] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt >>>> [ 13.746528] EDAC MC: Ver: 3.0.0 >>>> [ 13.770194] input: PC Speaker as >>>> /devices/platform/pcspkr/input/input7 >>>> [ OK ] Found device /dev/ttyS0. >>>> [ 13.788550] microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70a >>>> [ 14.057309] microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70a >>>> [ 14.064513] microcode: CPU0 updated to revision 0x710, date = >>>> 2013-06-17 >>>> [ 14.071276] microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70a >>>> [ 14.077273] microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70a >>>> [ 14.083967] microcode: CPU1 updated to revision 0x710, date = >>>> 2013-06-17 >>>> [ 14.090703] microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70a >>>> [ 14.096683] microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70a >>>> [ 14.103126] microcode: CPU2 updated to revision 0x710, date = >>>> 2013-06-17 >>>> [ 14.109840] microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70a >>>> [ 14.115792] microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70a >>>> [ 14.122214] microcode: CPU3 updated to revision 0x710, date = >>>> 2013-06-17 >>>> [ 14.128926] perf_event_intel: PEBS enabled due to microcode update >>>> [ 14.135169] microcode: Microcode Update Driver: v2.00 >>>> <tigran at aivazian.fsnet.co.uk>, Peter Oruba >>>> [ 14.248144] shpchp: Standard Hot Plug PCI Controller Driver version: >>>> 0.4 >>>> [ 14.271813] WARNING! power/level is deprecated; use power/control >>>> instead >>>> [ 14.420616] iTCO_vendor_support: vendor-support=0 >>>> [ 14.426856] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 >>>> [ 14.432485] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled >>>> by hardware/BIOS >>>> [ OK ] Started udev Wait for Complete Device Initialization. >>>> Starting Activation of DM RAI[ 14.455365] snd_hda_intel >>>> 0000:05:00.1: Disabling MSI >>>> D sets... >>>> [ 14.461832] snd_hda_intel 0000:05:00.1: Handle VGA-switcheroo audio >>>> client >>>> [ 14.473273] sound hdaudioC0D0: ALC262: SKU not ready 0x411111f0 >>>> [ 14.479610] sound hdaudioC0D0: autoconfig: line_outs=1 >>>> (0x15/0x0/0x0/0x0/0x0) type:line >>>> [ 14.487631] sound hdaudioC0D0: speaker_outs=1 >>>> (0x16/0x0/0x0/0x0/0x0) >>>> [ 14.494268] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) >>>> [ 14.500465] sound hdaudioC0D0: mono: mono_out=0x0 >>>> [ 14.505444] sound hdaudioC0D0: inputs: >>>> [ 14.509474] sound hdaudioC0D0: Front Mic=0x19 >>>> [ 14.514283] sound hdaudioC0D0: Rear Mic=0x18 >>>> [ 14.519004] sound hdaudioC0D0: Line=0x1a >>>> [ 14.534148] input: HDA Intel PCH Front Mic as >>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 >>>> [ OK [ 14.543371] input: HDA Intel PCH Rear Mic as >>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 >>>> ] Reached target[ 14.553521] input: HDA Intel PCH Line as >>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 >>>> Sound Card. >>>> [ 14.563465] input: HDA Intel PCH Line Out as >>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 >>>> [ 14.573669] input: HDA Intel PCH Front Headphone as >>>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 >>>> [ OK ] Started Activation of DM RAID sets. >>>> [ [ 14.650020] input: HP WMI hotkeys as /devices/virtual/input/input8 >>>> OK ] Reached target Encrypted Volumes. >>>> [ 14.861374] input: HDA NVidia HDMI/DP,pcm=3 as >>>> /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input14 >>>> [ 14.871750] input: HDA NVidia HDMI/DP,pcm=7 as >>>> /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input15 >>>> [ 14.882111] input: HDA NVidia HDMI/DP,pcm=8 as >>>> /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input16 >>>> [ 14.892494] input: HDA NVidia HDMI/DP,pcm=9 as >>>> /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input17 >>>> [ OK ] Found device ST31000524AS. >>>> Starting File System Check on >>>> /dev/disk/by-uuid/0647...f0b6564e5455... >>>> [ OK ] Found device ST31000524AS. >>>> Activating swap >>>> /dev/disk/by-uuid/3429ef24-72c1-435f...15132ef30516... >>>> [ 15.331176] Adding 14195708k swap on /dev/sda9. Priority:-1 >>>> extents:1 across:14195708k FS >>>> [ OK ] Activated swap >>>> /dev/disk/by-uuid/3429ef24-72c1-435f-a55b-15132ef30516. >>>> [ OK ] Reached target Swap. >>>> [ 14.739416] systemd-fsck[754]: /dev/sda1: recovering journal >>>> [ OK ] Found device ST31000524AS. >>>> Mounting /mnt/foo... >>>> [ 16.328179] EXT4-fs (sda5): recovery complete >>>> [ 16.332562] EXT4-fs (sda5): mounted filesystem with ordered data >>>> mode. Opts: (null) >>>> [ OK ] Mounted /mnt/foo. >>>> [ 15.657813] systemd-fsck[754]: /dev/sda1: clean, 1055/640848 files, >>>> 363426/2560000 blocks >>>> [ OK ] Started File System Check on >>>> /dev/disk/by-uuid/06476...d-f0b6564e5455. >>>> Mounting /boot... >>>> [ 16.803480] EXT4-fs (sda1): mounted filesystem with ordered data >>>> mode. Opts: (null) >>>> [ OK ] Mounted /boot. >>>> [ OK ] Reached target Local File Systems. >>>> Starting Tell[ 16.824355] systemd-journald[534]: Received >>>> request to flush runtime journal from PID 1 >>>> Plymouth To Write Out Runtime Data... >>>> Starting Trigger Flushing of Journal to Persistent Storage... >>>> Starting Create Volatile Files and Directories... >>>> Starting Security Auditing Service... >>>> [ OK ] Started Trigger Flushing of Journal to Persistent Storage. >>>> [ OK ] Started Security Auditing Service. >>>> [ OK ] Started Tell Plymouth To Write Out Runtime Data. >>>> [ 16.888896] audit: type=1305 audit(1413971579.962:3): audit_pid=772 >>>> old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 >>>> res=1 >>>> [ OK ] Started Create Volatile Files and Directories. >>>> Starting Update UTMP about System Reboot/Shutdown... >>>> [ OK ] Started Update UTMP about System Reboot/Shutdown. >>>> [ OK ] Reached target System Initialization. >>>> [ OK ] Reached target Timers. >>>> Starting Manage Sound Card State (restore and store)... >>>> [ OK ] Started Manage Sound Card State (restore and store). >>>> [ OK ] Listening on Open-iSCSI iscsid Socket. >>>> [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. >>>> [ OK ] Listening on CUPS Printing Service Sockets. >>>> [ OK ] Listening on Open-iSCSI iscsiuio Socket. >>>> [ OK ] Reached target Paths. >>>> [ 17.417620] systemd-journald[534]: File >>>> /var/log/journal/5504ea9d96a745d3bfa88caececd2740/system.journal >>>> corrupted or uncleanly shut down, renaming and replacing. >>>> [ OK ] Listening on RPCbind Server Activation Socket. >>>> [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. >>>> [ OK ] Listening on D-Bus System Message Bus Socket. >>>> [ OK ] Reached target Sockets. >>>> [ OK ] Reached target Basic System. >>>> Starting firewalld - dynamic firewall daemon... >>>> Starting Permit User Sessions... >>>> Starting ABRT Automated Bug Reporting Tool... >>>> [ OK ] Started ABRT Automated Bug Reporting Tool. >>>> Starting Install ABRT coredump hook... >>>> Starting Self Monitoring and Reporting Technology (SMART) >>>> Daemon... >>>> [ OK ] Started Self Monitoring and Reporting Technology (SMART) >>>> Daemon. >>>> Starting ABRT Xorg log watcher... >>>> [ OK ] Started ABRT Xorg log watcher. >>>> Starting Restorecon maintaining path file context... >>>> [ OK ] Started Restorecon maintaining path file context. >>>> Starting ABRT kernel log watcher... >>>> [ OK ] Started ABRT kernel log watcher. >>>> Starting irqbalance daemon... >>>> [ OK ] Started irqbalance daemon. >>>> Starting Hardware RNG Entropy Gatherer Daemon... >>>> [ OK ] Started Hardware RNG Entropy Gatherer Daemon. >>>> Starting RPC bind service... >>>> Starting System Logging Service... >>>> Starting Machine Check Exception Logging Daemon... >>>> Starting Avahi mDNS/DNS-SD Stack... >>>> Starting Login Service... >>>> Starting D-Bus System Message Bus... >>>> [ OK ] Started D-Bus System Message Bus. >>>> [ OK ] Started Permit User Sessions. >>>> [ OK ] Started Install ABRT coredump hook. >>>> [ 17.883468] systemd[1]: Unit rngd.service entered failed state. >>>> Starting Terminate Plymouth Boot Screen... >>>> Starting Command Scheduler... >>>> [ OK ] Started Command Scheduler. >>>> Starting Job spooling tools... >>>> [ OK ] Started Job spooling tools. >>>> Starting Wait for Plymouth Boot Screen to Quit... >>>> [ 20.504054] ip6_tables: (C) 2000-2006 Netfilter Core Team >>>> [ 21.700499] Ebtables v2.0 registered >>>> [ 21.923678] bridge: automatic filtering via arp/ip/ip6tables has been >>>> deprecated. Update your scripts to load br_netfilter if you need this. >>>> [ 23.919942] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) >>>> >>>> Fedora release 20 (Heisenbug) >>>> Kernel 3.18.0-rc1+ on an x86_64 (ttyS0) >>>> >>>> dhcp-16-105 login: [ 24.738924] cfg80211: Calling CRDA to update world >>>> regulatory domain >>>> [ 24.787880] cfg80211: World regulatory domain updated: >>>> [ 24.793032] cfg80211: DFS Master region: unset >>>> [ 24.797412] cfg80211: (start_freq - end_freq @ bandwidth), >>>> (max_antenna_gain, max_eirp), (dfs_cac_time) >>>> [ 24.807193] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), >>>> (N/A, 2000 mBm), (N/A) >>>> [ 24.815206] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), >>>> (N/A, 2000 mBm), (N/A) >>>> [ 24.823222] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), >>>> (N/A, 2000 mBm), (N/A) >>>> [ 24.831246] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), >>>> (N/A, 2000 mBm), (N/A) >>>> [ 24.839271] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), >>>> (N/A, 2000 mBm), (N/A) >>>> [ 24.847285] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), >>>> (N/A, 0 mBm), (N/A) >>>> [ 25.084687] nf_reject_ipv6: module license 'unspecified' taints >>>> kernel. >>>> [ 25.091343] Disabling lock debugging due to kernel taint >>>> [ 25.096791] nf_reject_ipv6: Unknown symbol ip6_local_out (err 0) >>>> [ 25.948589] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready >>>> [ 29.600674] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow >>>> Control: None >>>> [ 29.608149] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready >>>> [ 42.632070] tun: Universal TUN/TAP device driver, 1.6 >>>> [ 42.637138] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com> >>>> [ 42.669715] device virbr0-nic entered promiscuous mode >>>> [ 43.523326] device virbr0-nic left promiscuous mode >>>> [ 43.528246] virbr0: port 1(virbr0-nic) entered disabled state >>>> [ 57.978562] usb 1-1.2: USB disconnect, device number 4 >>>> [ 59.437582] usb 1-1.2: new low-speed USB device number 5 using >>>> xhci_hcd >>>> [ 59.538331] usb 1-1.2: New USB device found, idVendor=03f0, >>>> idProduct=0b4a >>>> [ 59.545220] usb 1-1.2: New USB device strings: Mfr=1, Product=2, >>>> SerialNumber=0 >>>> [ 59.552546] usb 1-1.2: Product: USB Optical Mouse >>>> [ 59.557263] usb 1-1.2: Manufacturer: Logitech >>>> [ 59.561762] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, >>>> ep desc says 80 microframes >>>> [ 59.582351] input: Logitech USB Optical Mouse as >>>> /devices/pci0000:00/0000:00:1c.7/0000:08:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:0B4A.0003/input/input18 >>>> [ 59.596353] hid-generic 0003:03F0:0B4A.0003: input,hidraw1: USB HID >>>> v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:08:00.0-1.2/input0 >>>> >>>> Fedora release 20 (Heisenbug) >>>> Kernel 3.18.0-rc1+ on an x86_64 (ttyS0) >>>> >>>> dhcp-16-105 login: root >>>> Password: >>>> Login incorrect >>>> >>>> dhcp-16-105 login: root >>>> Password: >>>> Last failed login: Wed Oct 22 17:53:57 CST 2014 on ttyS0 >>>> There was 1 failed login attempt since the last successful login. >>>> Last login: Wed Oct 22 15:45:44 on ttyS0 >>>> [root at dhcp-16-105 ~]# >>>> [root at dhcp-16-105 ~]# >>>> [root at dhcp-16-105 ~]# >>>> [root at dhcp-16-105 ~]# >>>> [root at dhcp-16-105 ~]# ls >>>> 1.svg Documents minicom.log >>>> Templates >>>> anaconda-ks.cfg Downloads Music >>>> test.sh >>>> aslr.sh dump-failure.txt Pictures >>>> Videos >>>> Desktop kexec-tools-2.0.4-32.el7.x86_64.rpm Public >>>> [root at dhcp-16-105 ~]# uname -a >>>> Linux dhcp-16-105.nay.redhat.com 3.18.0-rc1+ #76 SMP Wed Oct 22 15:15:32 >>>> CST 2014 x86_64 x86_64 x86_64 GNU/Linux >>>> [root at dhcp-16-105 ~]# kdumpctl restart >>>> kexec: unloaded kdump kernel >>>> Stopping kdump: [OK] >>>> kexec: loaded kdump kernel >>>> Starting kdump: [OK] >>>> [root at dhcp-16-105 ~]# cat /proc/cmdline >>>> BOOT_IMAGE=/vmlinuz-3.18.0-rc1+ >>>> root=UUID=f170152e-de83-46ee-9546-8ccd53f9753b ro rd.md=0 rd.lvm=0 >>>> rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-sunt >>>> [root at dhcp-16-105 ~]# less /proc/cmdline >>>> BOOT_IMAGE=/vmlinuz-3.18.0-rc1+ >>>> root=UUID=f170152e-de83-46ee-9546-8ccd53f9753b ro rd.md=0 rd.lvm=0 >>>> rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-suit >>>> (END)[ 113.077182] usb 1-1.2: USB disconnect, device number 5 >>>> ...skipping... >>>> BOOT_IMAGE=/vmlinuz-3.18.0-rc1+ >>>> root=UUID=f170152e-de83-46ee-9546-8ccd53f9753b ro rd.md=0 rd.lvm=0 >>>> rd.dm=0 vconsole.keymap=us rd.luks=0 vconsole.font=latarcyrheb-suit >>>> ~ >>>> ~ >>>> ~ >>>> ~ >>>> BOOT_IMAGE=/vmlinuz-3.18.0-rc1+ >>>> root=UUID=f170152e-de83-46ee-9546-8ccd53f9753b r >>>> o rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=us rd.luks=0 >>>> vconsole.font=latarcyrhe >>>> b-sun16 rd.shell crashkernel=256M LANG=en_US.UTF-8 >>>> console=ttyS0,115200n8 intel_ >>>> iommu=on earlyprintk=serial nokaslr nomodeset >>>> ~ >>>> ~ >>>> ~ >>>> ~ >>>> ~ >>>> ~ >>>> ~ >>>> ~ >>>> ~ >>>> ~ >>>> ~ >>>> (END)[ 114.537466] usb 1-1.2: new low-speed USB device number 6 using >>>> xhci_hcd >>>> (END)[ 114.642462] usb 1-1.2: New USB device found, idVendor=03f0, >>>> idProduct=0b4a >>>> [ 114.649381] usb 1-1.2: New USB device strings: Mfr=1, Product=2, >>>> SerialNumber=0 >>>> [ 114.656722] usb 1-1.2: Product: USB Optical Mouse >>>> [ 114.661443] usb 1-1.2: Manufacturer: Logitech >>>> [ 114.666112] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, >>>> ep desc says 80 microframes >>>> [ 114.681135] input: Logitech USB Optical Mouse as >>>> /devices/pci0000:00/0000:00:1c.7/0000:08:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:0B4A.0004/input/input19 >>>> [ 114.695318] hid-generic 0003:03F0:0B4A.0004: input,hidraw1: USB HID >>>> v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:08:00.0-1.2/input0 >>>> [root at dhcp-16-105 ~]# >>>> [root at dhcp-16-105 ~]# >>>> [root at dhcp-16-105 ~]# >>>> [root at dhcp-16-105 ~]# >>>> [root at dhcp-16-105 ~]# echo c >[ 168.175473] usb 1-1.2: USB disconnect, >>>> device number 6 >>>> [ 169.636143] usb 1-1.2: new low-speed USB device number 7 using >>>> xhci_hcd >>>> [ 169.740999] usb 1-1.2: New USB device found, idVendor=03f0, >>>> idProduct=0b4a >>>> [ 169.747910] usb 1-1.2: New USB device strings: Mfr=1, Product=2, >>>> SerialNumber=0 >>>> [ 169.755240] usb 1-1.2: Product: USB Optical Mouse >>>> [ 169.759961] usb 1-1.2: Manufacturer: Logitech >>>> [ 169.764600] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, >>>> ep desc says 80 microframes >>>> [ 169.779073] input: Logitech USB Optical Mouse as >>>> /devices/pci0000:00/0000:00:1c.7/0000:08:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:0B4A.0005/input/input20 >>>> [ 169.793273] hid-generic 0003:03F0:0B4A.0005: input,hidraw1: USB HID >>>> v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:08:00.0-1.2/input0 >>>> [ 223.273783] usb 1-1.2: USB disconnect, device number 7 >>>> [ 224.733810] usb 1-1.2: new low-speed USB device number 8 using >>>> xhci_hcd >>>> [ 224.838806] usb 1-1.2: New USB device found, idVendor=03f0, >>>> idProduct=0b4a >>>> [ 224.845721] usb 1-1.2: New USB device strings: Mfr=1, Product=2, >>>> SerialNumber=0 >>>> [ 224.853059] usb 1-1.2: Product: USB Optical Mouse >>>> [ 224.857785] usb 1-1.2: Manufacturer: Logitech >>>> [ 224.862438] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, >>>> ep desc says 80 microframes >>>> [ 224.876877] input: Logitech USB Optical Mouse as >>>> /devices/pci0000:00/0000:00:1c.7/0000:08:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:0B4A.0006/input/input21 >>>> [ 224.891163] hid-generic 0003:03F0:0B4A.0006: input,hidraw1: USB HID >>>> v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:08:00.0-1.2/input0 >>>> [ 278.372084] usb 1-1.2: USB disconnect, device number 8 >>>> [ 279.832487] usb 1-1.2: new low-speed USB device number 9 using >>>> xhci_hcd >>>> [ 279.934347] usb 1-1.2: New USB device found, idVendor=03f0, >>>> idProduct=0b4a >>>> [ 279.941258] usb 1-1.2: New USB device strings: Mfr=1, Product=2, >>>> SerialNumber=0 >>>> [ 279.948587] usb 1-1.2: Product: USB Optical Mouse >>>> [ 279.953313] usb 1-1.2: Manufacturer: Logitech >>>> [ 279.957963] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, >>>> ep desc says 80 microframes >>>> [ 279.975205] input: Logitech USB Optical Mouse as >>>> /devices/pci0000:00/0000:00:1c.7/0000:08:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:0B4A.0007/input/input22 >>>> [ 279.990344] hid-generic 0003:03F0:0B4A.0007: input,hidraw1: USB HID >>>> v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:08:00.0-1.2/input0 >>>> >>>> -bash: syntax error near unexpected token `newline' >>>> [root at dhcp-16-105 ~]# echo c >/proc/sysrq-trigger >>>> [ 302.991695] SysRq : Trigger a crash >>>> [ 302.995270] BUG: unable to handle kernel NULL pointer dereference at >>>> (null) >>>> [ 303.003163] IP: [<ffffffff81446d66>] sysrq_handle_crash+0x16/0x20 >>>> [ 303.009300] PGD cb140067 PUD c7334067 PMD 0 >>>> [ 303.013652] Oops: 0002 [#1] SMP >>>> [ 303.016930] Modules linked in: xt_CHECKSUM tun nf_conntrack_ipv6 >>>> nf_defrag_ipv6 cfg80211 nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack >>>> nf_conntrack ebtable_nat ebc >>>> [ 303.103047] CPU: 1 PID: 1169 Comm: bash Tainted: P >>>> 3.18.0-rc1+ #76 >>>> [ 303.110454] Hardware name: Hewlett-Packard HP Z420 Workstation/1589, >>>> BIOS J61 v01.02 03/09/2012 >>>> [ 303.119166] task: ffff88040dbb9bc0 ti: ffff880415898000 task.ti: >>>> ffff880415898000 >>>> [ 303.126662] RIP: 0010:[<ffffffff81446d66>] [<ffffffff81446d66>] >>>> sysrq_handle_crash+0x16/0x20 >>>> [ 303.135227] RSP: 0018:ffff88041589be58 EFLAGS: 00010246 >>>> [ 303.140551] RAX: 000000000000000f RBX: ffffffff81caeb00 RCX: >>>> 0000000000000000 >>>> [ 303.147700] RDX: 0000000000000000 RSI: ffff88042fc8e038 RDI: >>>> 0000000000000063 >>>> [ 303.154841] RBP: ffff88041589be58 R08: 00000000000000c2 R09: >>>> ffffffff81ee0e9c >>>> [ 303.161993] R10: 000000000000041c R11: 000000000000041b R12: >>>> 0000000000000063 >>>> [ 303.169141] R13: 0000000000000000 R14: 0000000000000007 R15: >>>> 0000000000000000 >>>> [ 303.176287] FS: 00007f411bed9740(0000) GS:ffff88042fc80000(0000) >>>> knlGS:0000000000000000 >>>> [ 303.184389] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >>>> [ 303.190145] CR2: 0000000000000000 CR3: 00000000c72e2000 CR4: >>>> 00000000000407e0 >>>> [ 303.197289] Stack: >>>> [ 303.199315] ffff88041589be88 ffffffff81447557 0000000000000002 >>>> 00007f411bef7000 >>>> [ 303.206797] 0000000000000002 ffff88041589bf48 ffff88041589bea8 >>>> ffffffff81447a03 >>>> [ 303.214274] 0000000000000001 ffff8804190f5a80 ffff88041589bed8 >>>> ffffffff8126029d >>>> [ 303.221744] Call Trace: >>>> [ 303.224203] [<ffffffff81447557>] __handle_sysrq+0x107/0x170 >>>> [ 303.229879] [<ffffffff81447a03>] write_sysrq_trigger+0x33/0x40 >>>> [ 303.235811] [<ffffffff8126029d>] proc_reg_write+0x3d/0x80 >>>> [ 303.241314] [<ffffffff811f7cd7>] vfs_write+0xb7/0x1f0 >>>> [ 303.246475] [<ffffffff8102196c>] ? do_audit_syscall_entry+0x6c/0x70 >>>> [ 303.252843] [<ffffffff811f87c5>] SyS_write+0x55/0xd0 >>>> [ 303.257916] [<ffffffff81734ca9>] system_call_fastpath+0x12/0x17 >>>> [ 303.263938] Code: c1 f7 ff ff eb db 66 2e 0f 1f 84 00 00 00 00 00 0f >>>> 1f 44 00 00 66 66 66 66 90 55 c7 05 64 66 a9 00 01 00 00 00 48 89 e5 0f >>>> ae f8 <c6> 04 25 00 0 >>>> [ 303.283989] RIP [<ffffffff81446d66>] sysrq_handle_crash+0x16/0x20 >>>> [ 303.290209] RSP <ffff88041589be58> >>>> [ 303.293709] CR2: 0000000000000000 >>>> I'm in purgatory >>>> earlyser0] disabled >>>> [ 0.000000] tsc: Fast TSC calibration using PIT >>>> [ 0.000000] tsc: Detected 2793.258 MHz processor >>>> [ 0.000062] Calibrating delay loop (skipped), value calculated using >>>> timer frequency.. 5586.51 BogoMIPS (lpj=2793258) >>>> [ 0.010711] pid_max: default: 32768 minimum: 301 >>>> [ 0.015350] ACPI: Core revision 20140828 >>>> [ 0.073036] ACPI: All ACPI Tables successfully acquired >>>> [ 0.078367] Security Framework initialized >>>> [ 0.082481] SELinux: Initializing. >>>> [ 0.086084] Dentry cache hash table entries: 32768 (order: 6, 262144 >>>> bytes) >>>> [ 0.093162] Inode-cache hash table entries: 16384 (order: 5, 131072 >>>> bytes) >>>> [ 0.100099] Mount-cache hash table entries: 512 (order: 0, 4096 >>>> bytes) >>>> [ 0.106633] Mountpoint-cache hash table entries: 512 (order: 0, 4096 >>>> bytes) >>>> [ 0.113883] Initializing cgroup subsys memory >>>> [ 0.118251] Initializing cgroup subsys devices >>>> [ 0.122704] Initializing cgroup subsys freezer >>>> [ 0.127157] Initializing cgroup subsys net_cls >>>> [ 0.131616] Initializing cgroup subsys blkio >>>> [ 0.135900] Initializing cgroup subsys perf_event >>>> [ 0.140617] Initializing cgroup subsys hugetlb >>>> [ 0.145111] CPU: Physical Processor ID: 0 >>>> [ 0.149128] CPU: Processor Core ID: 1 >>>> [ 0.152817] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 >>>> [ 0.152817] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 >>>> [ 0.175675] Freeing SMP alternatives memory: 24K (ffffffffade80000 - >>>> ffffffffade86000) >>>> [ 0.186233] ftrace: allocating 27051 entries in 106 pages >>>> [ 0.216370] dmar: Host address width 46 >>>> [ 0.220217] dmar: DRHD base: 0x000000dfffc000 flags: 0x1 >>>> [ 0.225550] dmar: IOMMU 0: reg_base_addr dfffc000 ver 1:0 cap >>>> d2078c106f0462 ecap f020fe >>>> [ 0.233654] dmar: RMRR base: 0x000000cba11000 end: 0x000000cba27fff >>>> [ 0.239931] dmar: ATSR flags: 0x0 >>>> [ 0.243357] IOAPIC id 0 under DRHD base 0xdfffc000 IOMMU 0 >>>> [ 0.248936] IOAPIC id 2 under DRHD base 0xdfffc000 IOMMU 0 >>>> [ 0.254521] HPET id 0 under DRHD base 0xdfffc000 >>>> [ 0.259338] Enabled IRQ remapping in xapic mode >>>> [ 0.264465] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >>>> [ 0.280520] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1603 0 @ 2.80GHz >>>> (fam: 06, model: 2d, stepping: 07) >>>> [ 0.289972] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge >>>> events, full-width counters, Broken BIOS detected, complain to your >>>> hardware vendor. >>>> [ 0.303872] [Firmware Bug]: the BIOS has corrupted hw-PMU resources >>>> (MSR 38d is b0) >>>> [ 0.311542] Intel PMU driver. >>>> [ 0.314527] ... version: 3 >>>> [ 0.318547] ... bit width: 48 >>>> [ 0.322654] ... generic registers: 8 >>>> [ 0.326677] ... value mask: 0000ffffffffffff >>>> [ 0.332003] ... max period: 0000ffffffffffff >>>> [ 0.337330] ... fixed-purpose events: 3 >>>> [ 0.341350] ... event mask: 00000007000000ff >>>> [ 0.348995] x86: Booted up 1 node, 1 CPUs >>>> [ 0.353023] smpboot: Total of 1 processors activated (5586.51 >>>> BogoMIPS) >>>> [ 0.359685] NMI watchdog: enabled on all CPUs, permanently consumes >>>> one hw-PMU counter. >>>> [ 0.370673] devtmpfs: initialized >>>> [ 0.378421] PM: Registering ACPI NVS region [mem >>>> 0xcb750000-0xcb7dafff] (569344 bytes) >>>> [ 0.386375] PM: Registering ACPI NVS region [mem >>>> 0xcbaad000-0xcbaaefff] (8192 bytes) >>>> [ 0.394133] PM: Registering ACPI NVS region [mem >>>> 0xcbabb000-0xcbacdfff] (77824 bytes) >>>> [ 0.401983] PM: Registering ACPI NVS region [mem >>>> 0xcbb56000-0xcbb5dfff] (32768 bytes) >>>> [ 0.409826] PM: Registering ACPI NVS region [mem >>>> 0xcbb71000-0xcbffffff] (4780032 bytes) >>>> [ 0.419640] atomic64_test: passed for x86-64 platform with CX8 and >>>> with SSE >>>> [ 0.426625] pinctrl core: initialized pinctrl subsystem >>>> [ 0.431918] RTC time: 9:57:56, date: 10/22/14 >>>> [ 0.436548] NET: Registered protocol family 16 >>>> [ 0.441384] cpuidle: using governor menu >>>> [ 0.445546] ACPI: bus type PCI registered >>>> [ 0.449572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 >>>> [ 0.456155] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem >>>> 0xe0000000-0xefffffff] (base 0xe0000000) >>>> [ 0.465479] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in >>>> E820 >>>> [ 0.472847] PCI: Using configuration type 1 for base access >>>> [ 0.480712] ACPI: Added _OSI(Module Device) >>>> [ 0.484911] ACPI: Added _OSI(Processor Device) >>>> [ 0.489362] ACPI: Added _OSI(3.0 _SCP Extensions) >>>> [ 0.494080] ACPI: Added _OSI(Processor Aggregator Device) >>>> [ 0.512071] ACPI: Executed 1 blocks of module-level executable AML >>>> code >>>> [ 0.633617] ACPI: Interpreter enabled >>>> [ 0.637301] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep >>>> State [\_S1_] (20140828/hwxface-580) >>>> [ 0.646590] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep >>>> State [\_S2_] (20140828/hwxface-580) >>>> [ 0.655889] ACPI: (supports S0 S3 S4 S5) >>>> [ 0.659830] ACPI: Using IOAPIC for interrupt routing >>>> [ 0.664855] PCI: Using host bridge windows from ACPI; if necessary, >>>> use "pci=nocrs" and report a bug >>>> [ 0.675416] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored >>>> [ 0.696563] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) >>>> [ 0.702770] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM >>>> ClockPM Segments MSI] >>>> [ 0.711195] acpi PNP0A08:00: _OSC: platform does not support >>>> [PCIeCapability] >>>> [ 0.718444] acpi PNP0A08:00: _OSC: not requesting control; platform >>>> does not support [PCIeCapability] >>>> [ 0.727682] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER >>>> PCIeCapability] >>>> [ 0.735439] acpi PNP0A08:00: _OSC: platform willing to grant >>>> [PCIeHotplug PME AER] >>>> [ 0.743024] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM >>>> [ 0.750309] PCI host bridge to bus 0000:00 >>>> [ 0.754422] pci_bus 0000:00: root bus resource [bus 00-7f] >>>> [ 0.759918] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] >>>> [ 0.766112] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] >>>> [ 0.772304] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df] >>>> [ 0.778498] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] >>>> [ 0.784695] pci_bus 0000:00: root bus resource [mem >>>> 0x000a0000-0x000bffff] >>>> [ 0.791581] pci_bus 0000:00: root bus resource [mem >>>> 0x000c0000-0x000dffff] >>>> [ 0.798470] pci_bus 0000:00: root bus resource [mem >>>> 0xd4000000-0xdfffffff] >>>> [ 0.805360] pci_bus 0000:00: root bus resource [mem >>>> 0x3c0000000000-0x3c007fffffff] >>>> [ 0.813350] pci 0000:00:01.0: System wakeup disabled by ACPI >>>> [ 0.819266] pci 0000:00:02.0: System wakeup disabled by ACPI >>>> [ 0.825175] pci 0000:00:03.0: System wakeup disabled by ACPI >>>> [ 0.832571] pci 0000:00:19.0: System wakeup disabled by ACPI >>>> [ 0.838507] pci 0000:00:1a.0: System wakeup disabled by ACPI >>>> [ 0.844614] pci 0000:00:1c.0: Enabling MPC IRBNCE >>>> [ 0.849334] pci 0000:00:1c.0: Intel PCH root port ACS workaround >>>> enabled >>>> [ 0.856087] pci 0000:00:1c.0: System wakeup disabled by ACPI >>>> [ 0.862019] pci 0000:00:1c.5: Enabling MPC IRBNCE >>>> [ 0.866733] pci 0000:00:1c.5: Intel PCH root port ACS workaround >>>> enabled >>>> [ 0.873488] pci 0000:00:1c.5: System wakeup disabled by ACPI >>>> [ 0.879358] pci 0000:00:1c.6: Enabling MPC IRBNCE >>>> [ 0.884074] pci 0000:00:1c.6: Intel PCH root port ACS workaround >>>> enabled >>>> [ 0.890831] pci 0000:00:1c.6: System wakeup disabled by ACPI >>>> [ 0.896699] pci 0000:00:1c.7: Enabling MPC IRBNCE >>>> [ 0.901423] pci 0000:00:1c.7: Intel PCH root port ACS workaround >>>> enabled >>>> [ 0.908185] pci 0000:00:1c.7: System wakeup disabled by ACPI >>>> [ 0.914122] pci 0000:00:1d.0: System wakeup disabled by ACPI >>>> [ 0.919960] pci 0000:00:1e.0: System wakeup disabled by ACPI >>>> [ 0.926419] pci 0000:00:01.0: PCI bridge to [bus 03] >>>> [ 0.933439] pci 0000:00:02.0: PCI bridge to [bus 05] >>>> [ 0.938534] pci 0000:00:03.0: PCI bridge to [bus 04] >>>> [ 0.943949] pci 0000:00:11.0: PCI bridge to [bus 02] >>>> [ 0.949041] pci 0000:00:1c.0: PCI bridge to [bus 01] >>>> [ 0.954153] pci 0000:00:1c.5: PCI bridge to [bus 06] >>>> [ 0.959237] pci 0000:00:1c.6: PCI bridge to [bus 07] >>>> [ 0.966238] pci 0000:00:1c.7: PCI bridge to [bus 08] >>>> [ 0.971737] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive >>>> decode) >>>> [ 0.979423] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) >>>> [ 0.985625] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM >>>> ClockPM Segments MSI] >>>> [ 0.994048] acpi PNP0A08:01: _OSC: platform does not support >>>> [PCIeCapability] >>>> [ 1.001306] acpi PNP0A08:01: _OSC: not requesting control; platform >>>> does not support [PCIeCapability] >>>> [ 1.010545] acpi PNP0A08:01: _OSC: OS requested [PCIeHotplug PME AER >>>> PCIeCapability] >>>> [ 1.018301] acpi PNP0A08:01: _OSC: platform willing to grant >>>> [PCIeHotplug PME AER] >>>> [ 1.025882] acpi PNP0A08:01: _OSC failed (AE_SUPPORT); disabling ASPM >>>> [ 1.032713] PCI host bridge to bus 0000:80 >>>> [ 1.036824] pci_bus 0000:80: root bus resource [bus 80-ff] >>>> [ 1.042327] pci_bus 0000:80: root bus resource [io 0x0000-0x03af] >>>> [ 1.048523] pci_bus 0000:80: root bus resource [io 0x03e0-0x0cf7] >>>> [ 1.054715] pci_bus 0000:80: root bus resource [mem >>>> 0x000c0000-0x000dffff] >>>> [ 1.061762] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 >>>> 14 15), disabled. >>>> [ 1.070108] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 >>>> 14 15), disabled. >>>> [ 1.078448] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 >>>> 14 15), disabled. >>>> [ 1.086594] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 >>>> 14 15), disabled. >>>> [ 1.094733] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 >>>> 14 15), disabled. >>>> [ 1.103063] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 >>>> 14 15) *0, disabled. >>>> [ 1.111589] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 >>>> 14 15), disabled. >>>> [ 1.119926] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 >>>> 14 15), disabled. >>>> [ 1.128398] APIC: Disabling requested cpu. Processor 4/0x0 ignored. >>>> [ 1.134686] ACPI: Unable to map lapic to logical cpu number >>>> [ 1.140528] ACPI: NR_CPUS/possible_cpus limit of 1 reached. >>>> Processor 5/0x4 ignored. >>>> [ 1.148372] ACPI: Unable to map lapic to logical cpu number >>>> [ 1.154106] ACPI: NR_CPUS/possible_cpus limit of 1 reached. >>>> Processor 6/0x6 ignored. >>>> [ 1.161946] ACPI: Unable to map lapic to logical cpu number >>>> [ 1.168184] ACPI: Enabled 2 GPEs in block 00 to 3F >>>> [ 1.173207] vgaarb: setting as boot device: PCI:0000:05:00.0 >>>> [ 1.178880] vgaarb: device added: >>>> PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none >>>> [ 1.186982] vgaarb: loaded >>>> [ 1.189700] vgaarb: bridge control possible 0000:05:00.0 >>>> [ 1.195147] SCSI subsystem initialized >>>> [ 1.199024] ACPI: bus type USB registered >>>> [ 1.203086] usbcore: registered new interface driver usbfs >>>> [ 1.208594] usbcore: registered new interface driver hub >>>> [ 1.213938] usbcore: registered new device driver usb >>>> [ 1.219153] PCI: Using ACPI for IRQ routing >>>> [ 1.231169] PCI: Discovered peer bus ff >>>> [ 1.235070] PCI host bridge to bus 0000:ff >>>> [ 1.239179] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] >>>> [ 1.245370] pci_bus 0000:ff: root bus resource [mem >>>> 0x00000000-0x3fffffffffff] >>>> [ 1.252608] pci_bus 0000:ff: No busn resource found for root bus, >>>> will use [bus ff-ff] >>>> [ 1.264714] NetLabel: Initializing >>>> [ 1.268127] NetLabel: domain hash size = 128 >>>> [ 1.272491] NetLabel: protocols = UNLABELED CIPSOv4 >>>> [ 1.277497] NetLabel: unlabeled traffic allowed by default >>>> [ 1.283296] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 >>>> [ 1.289663] hpet0: 8 comparators, 64-bit 14.318180 MHz counter >>>> [ 1.298564] Switched to clocksource hpet >>>> [ 1.311704] pnp: PnP ACPI init >>>> [ 1.314979] system 00:00: [mem 0xfc000000-0xfcffffff window] has been >>>> reserved >>>> [ 1.322236] system 00:00: [mem 0xfd000000-0xfdffffff window] has been >>>> reserved >>>> [ 1.329479] system 00:00: [mem 0xfe000000-0xfeafffff window] has been >>>> reserved >>>> [ 1.336718] system 00:00: [mem 0xfeb00000-0xfebfffff window] has been >>>> reserved >>>> [ 1.343955] system 00:00: [mem 0xfed00400-0xfed3ffff window] could >>>> not be reserved >>>> [ 1.351545] system 00:00: [mem 0xfed45000-0xfedfffff window] has been >>>> reserved >>>> [ 1.358781] system 00:00: [mem 0xdffff000-0xdfffffff window] has been >>>> reserved >>>> [ 1.366266] system 00:01: [io 0x0620-0x063f] has been reserved >>>> [ 1.372205] system 00:01: [io 0x0610-0x061f] has been reserved >>>> [ 1.378470] system 00:05: [io 0x04d0-0x04d1] has been reserved >>>> [ 1.385043] system 00:07: [io 0x0400-0x0453] could not be reserved >>>> [ 1.391337] system 00:07: [io 0x0458-0x047f] has been reserved >>>> [ 1.397275] system 00:07: [io 0x1180-0x119f] has been reserved >>>> [ 1.403208] system 00:07: [io 0x0500-0x057f] has been reserved >>>> [ 1.409144] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been >>>> reserved >>>> [ 1.415772] system 00:07: [mem 0xfec00000-0xfecfffff] could not be >>>> reserved >>>> [ 1.422746] system 00:07: [mem 0xfed08000-0xfed08fff] has been >>>> reserved >>>> [ 1.429376] system 00:07: [mem 0xff000000-0xffffffff] has been >>>> reserved >>>> [ 1.436117] system 00:08: [io 0x0454-0x0457] has been reserved >>>> [ 1.442645] system 00:09: [mem 0xfed40000-0xfed44fff] has been >>>> reserved >>>> [ 1.449289] pnp: PnP ACPI: found 10 devices >>>> [ 1.460619] pci 0000:00:01.0: PCI bridge to [bus 03] >>>> [ 1.465617] pci 0000:00:02.0: PCI bridge to [bus 05] >>>> [ 1.470602] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] >>>> [ 1.476723] pci 0000:00:02.0: bridge window [mem >>>> 0xd6000000-0xd70fffff] >>>> [ 1.483534] pci 0000:00:02.0: bridge window [mem >>>> 0xd8000000-0xddffffff 64bit pref] >>>> [ 1.491301] pci 0000:00:03.0: PCI bridge to [bus 04] >>>> [ 1.496292] pci 0000:00:11.0: PCI bridge to [bus 02] >>>> [ 1.501277] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] >>>> [ 1.507392] pci 0000:00:11.0: bridge window [mem >>>> 0xde400000-0xde8fffff 64bit pref] >>>> [ 1.515157] pci 0000:00:1c.0: PCI bridge to [bus 01] >>>> [ 1.520149] pci 0000:00:1c.5: PCI bridge to [bus 06] >>>> [ 1.525140] pci 0000:00:1c.6: PCI bridge to [bus 07] >>>> [ 1.530133] pci 0000:00:1c.7: PCI bridge to [bus 08] >>>> [ 1.535120] pci 0000:00:1c.7: bridge window [mem >>>> 0xd7200000-0xd72fffff] >>>> [ 1.541935] pci 0000:00:1e.0: PCI bridge to [bus 09] >>>> [ 1.546919] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] >>>> [ 1.553027] pci 0000:00:1e.0: bridge window [mem >>>> 0xd7100000-0xd71fffff] >>>> [ 1.559993] NET: Registered protocol family 2 >>>> [ 1.564629] TCP established hash table entries: 2048 (order: 2, 16384 >>>> bytes) >>>> [ 1.571721] TCP bind hash table entries: 2048 (order: 3, 32768 bytes) >>>> [ 1.578192] TCP: Hash tables configured (established 2048 bind 2048) >>>> [ 1.584583] TCP: reno registered >>>> [ 1.587827] UDP hash table entries: 256 (order: 1, 8192 bytes) >>>> [ 1.593681] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) >>>> [ 1.600029] NET: Registered protocol family 1 >>>> [ 1.621368] pci 0000:08:00.0: xHCI HW did not halt within 16000 usec >>>> status = 0x0 >>>> [ 1.629082] Unpacking initramfs... >>>> [ 2.108338] Freeing initrd memory: 16204K (ffff88002c02d000 - >>>> ffff88002d000000) >>>> [ 2.115728] IOMMU intel_iommu_in_crashdump = true >>>> [ 2.120458] IOMMU Skip disabling iommu hardware translations >>>> [ 2.126222] IOMMU Copying translate tables from panicked kernel >>>> [ 2.133478] IOMMU: root_new_virt:0xffff880027ddf000 >>>> phys:0x000027ddf000 >>>> [ 2.140116] IOMMU:0 Domain ids from panicked kernel: >>>> [ 2.145099] DID did:4(0x0004) >>>> [ 2.148078] DID did:9(0x0009) >>>> [ 2.151059] DID did:7(0x0007) >>>> [ 2.154038] DID did:3(0x0003) >>>> [ 2.157019] DID did:2(0x0002) >>>> [ 2.159998] DID did:6(0x0006) >>>> [ 2.162981] DID did:1(0x0001) >>>> [ 2.165958] DID did:8(0x0008) >>>> [ 2.168941] DID did:0(0x0000) >>>> [ 2.171919] DID did:10(0x000a) >>>> [ 2.174988] DID did:5(0x0005) >>>> [ 2.177966] ---------------------------------------- >>>> [ 2.182947] IOMMU 0 0xdfffc000: using Queued invalidation >>>> [ 2.188366] PCI-DMA: Intel(R) Virtualization Technology for Directed >>>> I/O >>>> [ 2.195091] dmar: DRHD: handling fault status reg 2 >>>> [ 2.195096] dmar: DMAR:[DMA Read] Request device [08:00.0] fault addr >>>> ffff2000 >>>> [ 2.195096] DMAR:[fault reason 12] non-zero reserved fields in PTE >>>> [ 2.215841] RAPL PMU detected, hw unit 2^-16 Joules, API unit is >>>> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer >>>> [ 2.226738] AVX version of gcm_enc/dec engaged. >>>> [ 2.231292] AES CTR mode by8 optimization enabled >>>> [ 2.238553] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) >>>> [ 2.245466] futex hash table entries: 256 (order: 2, 16384 bytes) >>>> [ 2.251622] Initialise system trusted keyring >>>> [ 2.256036] audit: initializing netlink subsys (disabled) >>>> [ 2.261520] audit: type=2000 audit(1413971876.315:1): initialized >>>> [ 2.268376] HugeTLB registered 2 MB page size, pre-allocated 0 pages >>>> [ 2.277283] zpool: loaded >>>> [ 2.279935] zbud: loaded >>>> [ 2.282811] VFS: Disk quotas dquot_6.5.2 >>>> [ 2.286815] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >>>> [ 2.293868] msgmni has been set to 463 >>>> [ 2.297735] Key type big_key registered >>>> [ 2.302645] alg: No test for stdrng (krng) >>>> [ 2.306778] NET: Registered protocol family 38 >>>> [ 2.311268] Key type asymmetric registered >>>> [ 2.315401] Asymmetric key parser 'x509' registered >>>> [ 2.320372] Block layer SCSI generic (bsg) driver version 0.4 loaded >>>> (major 252) >>>> [ 2.327837] io scheduler noop registered >>>> [ 2.331787] io scheduler deadline registered >>>> [ 2.336133] io scheduler cfq registered (default) >>>> [ 2.342328] ioapic: probe of 0000:00:05.4 failed with error -22 >>>> [ 2.348285] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >>>> [ 2.353897] pciehp: PCI Express Hot Plug Controller Driver version: >>>> 0.4 >>>> [ 2.360815] input: Power Button as >>>> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 >>>> [ 2.369189] ACPI: Power Button [PWRB] >>>> [ 2.372933] input: Power Button as >>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >>>> [ 2.380359] ACPI: Power Button [PWRF] >>>> [ 2.385897] GHES: HEST is not enabled! >>>> [ 2.389803] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >>>> [ 2.416763] serial 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = >>>> 115200) is a 16550A >>>> [ 2.445683] serial 0000:00:16.3: ttyS1 at I/O 0xf060 (irq = 17, >>>> base_baud = 115200) is a 16550A >>>> [ 2.454856] Non-volatile memory driver v1.3 >>>> [ 2.459066] Linux agpgart interface v0.103 >>>> [ 2.473906] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps >>>> 0x5 impl RAID mode >>>> [ 2.482029] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems >>>> sxs apst >>>> [ 2.489341] dmar: DRHD: handling fault status reg 102 >>>> [ 2.494411] dmar: DMAR:[DMA Write] Request device [00:1f.2] fault >>>> addr fffa0000 >>>> [ 2.494411] DMAR:[fault reason 05] PTE Write access is not set >>>> [ 2.507684] dmar: DRHD: handling fault status reg 202 >>>> [ 2.512751] dmar: DMAR:[DMA Write] Request device [00:1f.2] fault >>>> addr fff80000 >>>> [ 2.512751] DMAR:[fault reason 05] PTE Write access is not set >>>> [ 2.526844] scsi host0: ahci >>>> [ 2.529928] scsi host1: ahci >>>> [ 2.532945] scsi host2: ahci >>>> [ 2.535953] scsi host3: ahci >>>> [ 2.538965] scsi host4: ahci >>>> [ 2.541969] scsi host5: ahci >>>> [ 2.544931] ata1: SATA max UDMA/133 abar m2048 at 0xd7348000 port >>>> 0xd7348100 irq 27 >>>> [ 2.552347] ata2: DUMMY >>>> [ 2.554813] ata3: SATA max UDMA/133 abar m2048 at 0xd7348000 port >>>> 0xd7348200 irq 27 >>>> [ 2.562232] ata4: DUMMY >>>> [ 2.564692] ata5: DUMMY >>>> [ 2.567150] ata6: DUMMY >>>> [ 2.569960] libphy: Fixed MDIO Bus: probed >>>> [ 2.574264] xhci_hcd 0000:08:00.0: xHCI Host Controller >>>> [ 2.579579] xhci_hcd 0000:08:00.0: new USB bus registered, assigned >>>> bus number 1 >>>> [ 2.627224] xhci_hcd 0000:08:00.0: Host not halted after 16000 >>>> microseconds. >>>> [ 2.634294] xhci_hcd 0000:08:00.0: can't setup: -110 >>>> [ 2.639273] xhci_hcd 0000:08:00.0: USB bus 1 deregistered >>>> [ 2.644790] xhci_hcd 0000:08:00.0: init 0000:08:00.0 fail, -110 >>>> [ 2.650745] xhci_hcd: probe of 0000:08:00.0 failed with error -110 >>>> [ 2.656968] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) >>>> Driver >>>> [ 2.663534] ehci-pci: EHCI PCI platform driver >>>> [ 2.668147] ehci-pci 0000:00:1a.0: EHCI Host Controller >>>> [ 2.673441] ehci-pci 0000:00:1a.0: new USB bus registered, assigned >>>> bus number 1 >>>> [ 2.680876] ehci-pci 0000:00:1a.0: debug port 2 >>>> [ 2.689369] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd734b000 >>>> [ 2.700138] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >>>> [ 2.705994] usb usb1: New USB device found, idVendor=1d6b, >>>> idProduct=0002 >>>> [ 2.712805] usb usb1: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 2.720046] usb usb1: Product: EHCI Host Controller >>>> [ 2.724939] usb usb1: Manufacturer: Linux 3.18.0-rc1+ ehci_hcd >>>> [ 2.730790] usb usb1: SerialNumber: 0000:00:1a.0 >>>> [ 2.735614] hub 1-0:1.0: USB hub found >>>> [ 2.739403] hub 1-0:1.0: 3 ports detected >>>> [ 2.743798] ehci-pci 0000:00:1d.0: EHCI Host Controller >>>> [ 2.749118] ehci-pci 0000:00:1d.0: new USB bus registered, assigned >>>> bus number 2 >>>> [ 2.756550] ehci-pci 0000:00:1d.0: debug port 2 >>>> [ 2.765045] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd734a000 >>>> [ 2.776219] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >>>> [ 2.782069] usb usb2: New USB device found, idVendor=1d6b, >>>> idProduct=0002 >>>> [ 2.788879] usb usb2: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 2.796121] usb usb2: Product: EHCI Host Controller >>>> [ 2.801018] usb usb2: Manufacturer: Linux 3.18.0-rc1+ ehci_hcd >>>> [ 2.806862] usb usb2: SerialNumber: 0000:00:1d.0 >>>> [ 2.811682] hub 2-0:1.0: USB hub found >>>> [ 2.815463] hub 2-0:1.0: 3 ports detected >>>> [ 2.819699] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >>>> [ 2.825917] ohci-pci: OHCI PCI platform driver >>>> [ 2.830402] uhci_hcd: USB Universal Host Controller Interface driver >>>> [ 2.836863] usbcore: registered new interface driver usbserial >>>> [ 2.842736] usbcore: registered new interface driver >>>> usbserial_generic >>>> [ 2.849336] usbserial: USB Serial support registered for generic >>>> [ 2.855427] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] >>>> at 0x60,0x64 irq 1,12 >>>> [ 2.865965] serio: i8042 KBD port at 0x60,0x64 irq 1 >>>> [ 2.870968] serio: i8042 AUX port at 0x60,0x64 irq 12 >>>> [ 2.876174] mousedev: PS/2 mouse device common for all mice >>>> [ 2.881777] dmar: DRHD: handling fault status reg 302 >>>> [ 2.886838] dmar: DMAR:[DMA Write] Request device [00:1f.2] fault >>>> addr fff80000 >>>> [ 2.886838] DMAR:[fault reason 05] PTE Write access is not set >>>> [ 2.900089] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>>> [ 2.906303] dmar: DRHD: handling fault status reg 402 >>>> [ 2.911362] dmar: DMAR:[DMA Read] Request device [00:1f.2] fault addr >>>> fff80000 >>>> [ 2.911362] DMAR:[fault reason 06] PTE Read access is not set >>>> [ 2.924446] dmar: DRHD: handling fault status reg 502 >>>> [ 2.929508] dmar: DMAR:[DMA Write] Request device [00:1f.2] fault >>>> addr fffa0000 >>>> [ 2.929508] DMAR:[fault reason 05] PTE Write access is not set >>>> [ 2.942756] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >>>> [ 2.948961] dmar: DRHD: handling fault status reg 602 >>>> [ 2.954020] dmar: DMAR:[DMA Read] Request device [00:1f.2] fault addr >>>> fffa0000 >>>> [ 2.954020] DMAR:[fault reason 06] PTE Read access is not set >>>> [ 2.967195] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x100) >>>> [ 2.973713] rtc_cmos 00:04: RTC can wake from S4 >>>> [ 2.998582] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 >>>> [ 3.004729] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes >>>> nvram, hpet irqs >>>> [ 3.012928] device-mapper: uevent: version 1.0.3 >>>> [ 3.017920] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) >>>> initialised: dm-devel at redhat.com >>>> [ 3.026600] Intel P-state driver initializing. >>>> [ 3.032432] hidraw: raw HID events driver (C) Jiri Kosina >>>> [ 3.038489] usbcore: registered new interface driver usbhid >>>> [ 3.044082] usbhid: USB HID core driver >>>> [ 3.047965] oprofile: using NMI interrupt. >>>> [ 3.052434] drop_monitor: Initializing network drop monitor service >>>> [ 3.058843] ip_tables: (C) 2000-2006 Netfilter Core Team >>>> [ 3.064200] TCP: cubic registered >>>> [ 3.067566] Initializing XFRM netlink socket >>>> [ 3.071865] usb 1-1: new high-speed USB device number 2 using >>>> ehci-pci >>>> [ 3.078568] NET: Registered protocol family 10 >>>> [ 3.083052] dmar: DRHD: handling fault status reg 702 >>>> [ 3.088126] dmar: DMAR:[DMA Read] Request device [00:1a.0] fault addr >>>> ffffc000 >>>> [ 3.088126] DMAR:[fault reason 06] PTE Read access is not set >>>> [ 3.101185] ehci-pci 0000:00:1a.0: fatal error >>>> [ 3.105649] ehci-pci 0000:00:1a.0: HC died; cleaning up >>>> [ 3.111200] mip6: Mobile IPv6 >>>> [ 3.114184] NET: Registered protocol family 17 >>>> [ 3.118933] mce: Unable to init device /dev/mcelog (rc: -5) >>>> [ 3.124808] Loading compiled-in X.509 certificates >>>> [ 3.130800] Loaded X.509 cert 'Magrathea: Glacier signing key: >>>> d196e1366cc7c91295775c1e77c548314c3ad291' >>>> [ 3.140315] registered taskstats version 1 >>>> [ 3.145006] Magic number: 2:75:981 >>>> [ 3.148688] rtc_cmos 00:04: setting system clock to 2014-10-22 >>>> 09:57:59 UTC (1413971879) >>>> [ 3.169677] usb 2-1: new high-speed USB device number 2 using >>>> ehci-pci >>>> [ 3.176236] dmar: DRHD: handling fault status reg 2 >>>> [ 3.181125] dmar: DMAR:[DMA Read] Request device [00:1d.0] fault addr >>>> ffffc000 >>>> [ 3.181125] DMAR:[fault reason 06] PTE Read access is not set >>>> [ 3.194189] ehci-pci 0000:00:1d.0: fatal error >>>> [ 3.198641] ehci-pci 0000:00:1d.0: HC died; cleaning up >>>> [ 3.217718] tsc: Refined TSC clocksource calibration: 2793.268 MHz >>>> [ 4.224868] Switched to clocksource tsc >>>> [ 7.953940] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100) >>>> [ 8.263278] dmar: DRHD: handling fault status reg 102 >>>> [ 8.268341] dmar: DMAR:[DMA Write] Request device [00:1f.2] fault >>>> addr fffa0000 >>>> [ 8.268341] DMAR:[fault reason 05] PTE Write access is not set >>>> [ 8.281591] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >>>> [ 8.287798] dmar: DRHD: handling fault status reg 202 >>>> [ 8.292864] dmar: DMAR:[DMA Read] Request device [00:1f.2] fault addr >>>> fffa0000 >>>> [ 8.292864] DMAR:[fault reason 06] PTE Read access is not set >>>> [ 8.305939] dmar: DRHD: handling fault status reg 302 >>>> [ 8.311000] dmar: DMAR:[DMA Write] Request device [00:1f.2] fault >>>> addr fff80000 >>>> [ 8.311000] DMAR:[fault reason 05] PTE Write access is not set >>>> [ 8.324248] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>>> [ 8.330451] dmar: DRHD: handling fault status reg 402 >>>> [ 8.335516] dmar: DMAR:[DMA Read] Request device [00:1f.2] fault addr >>>> fff80000 >>>> [ 8.335516] DMAR:[fault reason 06] PTE Read access is not set >>>> [ 8.348586] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x100) >>>> [ 8.354866] ata1: limiting SATA link speed to 3.0 Gbps >>>> [ 13.292823] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100) >>>> [ 13.299109] ata3: limiting SATA link speed to 1.5 Gbps >>>> [ 13.639202] dmar: DRHD: handling fault status reg 502 >>>> [ 13.644267] dmar: DMAR:[DMA Write] Request device [00:1f.2] fault >>>> addr fffa0000 >>>> [ 13.644267] DMAR:[fault reason 05] PTE Write access is not set >>>> [ 13.657517] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) >>>> [ 13.663732] dmar: DRHD: handling fault status reg 602 >>>> [ 13.668791] dmar: DMAR:[DMA Read] Request device [00:1f.2] fault addr >>>> fffa0000 >>>> [ 13.668791] DMAR:[fault reason 06] PTE Read access is not set >>>> [ 13.681865] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >>>> [ 13.688074] dmar: DRHD: handling fault status reg 702 >>>> [ 13.693136] dmar: DMAR:[DMA Read] Request device [00:1f.2] fault addr >>>> fff80000 >>>> [ 13.693136] DMAR:[fault reason 06] PTE Read access is not set >>>> [ 13.706244] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x100) >>>> [ 18.668754] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x100) >>>> [ 18.996092] dmar: DRHD: handling fault status reg 2 >>>> [ 19.000991] dmar: DMAR:[DMA Write] Request device [00:1f.2] fault >>>> addr fffa0000 >>>> [ 19.000991] DMAR:[fault reason 05] PTE Write access is not set >>>> [ 19.014238] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) >>>> [ 19.020470] dmar: DRHD: handling fault status reg 102 >>>> [ 19.025531] dmar: DMAR:[DMA Write] Request device [00:1f.2] fault >>>> addr fff80000 >>>> [ 19.025531] DMAR:[fault reason 05] PTE Write access is not set >>>> [ 19.038777] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) >>>> [ 19.046230] Freeing unused kernel memory: 1428K (ffffffffadd1b000 - >>>> ffffffffade80000) >>>> [ 19.054081] Write protecting the kernel read-only data: 12288k >>>> [ 19.062742] Freeing unused kernel memory: 780K (ffff88002d73d000 - >>>> ffff88002d800000) >>>> [ 19.073229] Freeing unused kernel memory: 896K (ffff88002db20000 - >>>> ffff88002dc00000) >>>> [ 19.084013] systemd[1]: systemd 208 running in system mode. (+PAM >>>> +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) >>>> [ 19.096625] systemd[1]: Running in initial RAM disk. >>>> >>>> Welcome to Fedora 20 (Heisenbug) dracut-038-14.git20140724.fc22 >>>> (Initramfs)! >>>> >>>> [ 19.110372] systemd[1]: Set hostname to <dhcp-16-105.nay.redhat.com>. >>>> [ 19.117490] random: systemd urandom read with 5 bits of entropy >>>> available >>>> [ 19.152961] systemd[1]: Expecting device >>>> dev-disk-by\x2duuid-3429ef24\x2d72c1\x2d435f\x2da55b\x2d15132ef30516.device... >>>> Expecting device >>>> dev-disk-by\x2duuid-3429ef24\x2d72c...30516.device... >>>> [ 19.172364] systemd[1]: Expecting device >>>> dev-disk-by\x2duuid-06476532\x2d3675\x2d40ce\x2d98dd\x2df0b6564e5455.device... >>>> Expecting device >>>> dev-disk-by\x2duuid-06476532\x2d367...e5455.device... >>>> [ 19.191387] systemd[1]: Expecting device >>>> dev-disk-by\x2duuid-f170152e\x2dde83\x2d46ee\x2d9546\x2d8ccd53f9753b.device... >>>> Expecting device >>>> dev-disk-by\x2duuid-f170152e\x2dde8...9753b.device... >>>> [ 19.210406] systemd[1]: Starting -.slice. >>>> [ OK ] Created slice -.slice. >>>> [ 19.219412] systemd[1]: Created slice -.slice. >>>> [ 19.223887] systemd[1]: Starting System Slice. >>>> [ OK ] Created slice System Slice. >>>> [ 19.234432] systemd[1]: Created slice System Slice. >>>> [ 19.239348] systemd[1]: Starting Slices. >>>> [ OK ] Reached target Slices. >>>> [ 19.247440] systemd[1]: Reached target Slices. >>>> [ 19.251914] systemd[1]: Starting Timers. >>>> [ OK ] Reached target Timers. >>>> [ 19.260456] systemd[1]: Reached target Timers. >>>> [ 19.264945] systemd[1]: Starting Dispatch Password Requests to >>>> Console Directory Watch. >>>> [ 19.273011] systemd[1]: Started Dispatch Password Requests to Console >>>> Directory Watch. >>>> [ 19.280961] systemd[1]: Starting Paths. >>>> [ OK ] Reached target Paths. >>>> [ 19.289487] systemd[1]: Reached target Paths. >>>> [ 19.293873] systemd[1]: Starting Journal Socket. >>>> [ OK ] Listening on Journal Socket. >>>> [ 19.303500] systemd[1]: Listening on Journal Socket. >>>> [ 19.308541] systemd[1]: Started dracut ask for additional cmdline >>>> parameters. >>>> [ 19.315797] systemd[1]: Starting dracut cmdline hook... >>>> Starting dracut cmdline hook... >>>> [ 19.325786] systemd[1]: Starting Apply Kernel Variables... >>>> Starting Apply Kernel Variables... >>>> [ 19.339701] systemd[1]: Starting Journal Service... >>>> Starting Journal Service... >>>> [ OK ] Started Journal Service. >>>> [ 19.357521] systemd[1]: Started Journal Service. >>>> Starting Create list of required static device nodes...rrent >>>> kernel... >>>> [ OK ] Listening on udev Kernel Socket. >>>> [ OK ] Listening on udev Control Socket. >>>> [ OK ] Reached target Sockets. >>>> [ OK ] Reached target Swap. >>>> [ OK ] Reached target Local File Systems. >>>> [ OK ] Started Apply Kernel Variables. >>>> [ OK ] Started Create list of required static device nodes ...current >>>> kernel. >>>> Starting Create static device nodes in /dev... >>>> [ OK ] Started Create static device nodes in /dev. >>>> [ OK ] Started dracut cmdline hook. >>>> Starting dracut pre-udev hook... >>>> [ OK ] Started dracut pre-udev hook. >>>> Starting udev Kernel Device Manager... >>>> [ 19.486226] systemd-udevd[208]: starting version 208 >>>> [ OK ] Started udev Kernel Device Manager. >>>> Starting udev Coldplug all Devices... >>>> [ OK ] Started udev Coldplug all Devices. >>>> Starting dracut initqueue hook... >>>> [ OK ] Reached target System Initialization. >>>> [ OK ] Reached target Basic System. >>>> Mounting Configuration File System... >>>> [ OK ] Mounted Configuration File System. >>>> [ 19.602503] scsi host6: ata_generic >>>> [ 19.611919] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 >>>> [ 19.618384] scsi host7: ata_generic >>>> [ 19.622795] ata7: PATA max UDMA/100 cmd 0xf0b0 ctl 0xf0a0 bmdma >>>> 0xf070 irq 18 >>>> [ 19.629950] ata8: PATA max UDMA/100 cmd 0xf090 ctl 0xf080 bmdma >>>> 0xf078 irq 18 >>>> [ 19.641788] isci 0000:02:00.0: driver configured for rev: 5 silicon >>>> [ 19.655815] isci 0000:02:00.0: OEM SAS parameters (version: 1.3) >>>> loaded (firmware) >>>> [ 19.677821] isci 0000:02:00.0: SCU controller 0: phy 3-0 cables: >>>> {short, short, short, short} >>>> [ 19.695100] scsi host8: isci >>>> [ 19.707158] dmar: DRHD: handling fault status reg 202 >>>> [ 19.712220] dmar: DMAR:[DMA Read] Request device [02:00.0] fault addr >>>> ffe62000 >>>> [ 19.712220] DMAR:[fault reason 03] Invalid context entry >>>> [ 19.729420] random: nonblocking pool is initialized >>>> [ 32.664118] dmar: DRHD: handling fault status reg 302 >>>> [ 32.669177] dmar: DMAR:[DMA Write] Request device [00:19.0] fault >>>> addr fffdf000 >>>> [ 32.669177] DMAR:[fault reason 03] Invalid context entry >>>> [ 33.129634] pps_core: LinuxPPS API ver. 1 registered >>>> [ 33.134635] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 >>>> Rodolfo Giometti <giometti at linux.it> >>>> [ 36.529376] dmar: DRHD: handling fault status reg 402 >>>> [ 36.534434] dmar: DMAR:[DMA Write] Request device [00:19.0] fault >>>> addr fffde000 >>>> [ 36.534434] DMAR:[fault reason 03] Invalid context entry >>>> [ 42.796282] PTP clock support registered >>>> [ 45.991802] dmar: DRHD: handling fault status reg 502 >>>> [ 45.996862] dmar: DMAR:[DMA Write] Request device [00:19.0] fault >>>> addr fffdd000 >>>> [ 45.996862] DMAR:[fault reason 03] Invalid context entry >>>> [ 73.057617] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 23s! >>>> [systemd-udevd:211] >>>> [ 73.065458] Modules linked in: ptp pps_core isci libsas >>>> scsi_transport_sas ata_generic pata_acpi >>>> [ 73.074414] CPU: 0 PID: 211 Comm: systemd-udevd Not tainted >>>> 3.18.0-rc1+ #76 >>>> [ 73.081391] Hardware name: Hewlett-Packard HP Z420 Workstation/1589, >>>> BIOS J61 v01.02 03/09/2012 >>>> [ 73.090099] task: ffff88002c9d9bc0 ti: ffff88002c9d4000 task.ti: >>>> ffff88002c9d4000 >>>> [ 73.097596] RIP: 0010:[<ffffffffad326265>] [<ffffffffad326265>] >>>> sha256_transform+0x785/0x1c40 >>>> [ 73.106246] RSP: 0000:ffff88002c9d7ad8 EFLAGS: 00000a02 >>>> [ 73.111569] RAX: 00000000d9feb2d0 RBX: ffff88002ca0d840 RCX: >>>> 0000000049cd83f9 >>>> [ 73.118718] RDX: ffff88002c9d7ae0 RSI: 000000006e6e48c5 RDI: >>>> ffff88002ca0d9f8 >>>> [ 73.125866] RBP: ffff88002c9d7c18 R08: 000000006e7e58c4 R09: >>>> 000000003e2e6c85 >>>> [ 73.133005] R10: 000000004db92e92 R11: 0000000040429e07 R12: >>>> 0000000092f09b68 >>>> [ 73.140152] R13: ffffffffad3810e4 R14: ffffffffad0bf94c R15: >>>> ffff88002c9d7a78 >>>> [ 73.147299] FS: 00007fe467c6b880(0000) GS:ffff88002ec00000(0000) >>>> knlGS:0000000000000000 >>>> [ 73.155395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >>>> [ 73.161143] CR2: 00007f8f51c67000 CR3: 000000002c9ba000 CR4: >>>> 00000000000407b0 >>>> [ 73.168287] Stack: >>>> [ 73.170307] ffff88002c9d7fd8 0000000029000000 01000a0035150000 >>>> 00000000f00e0000 >>>> [ 73.177777] 000000001f000000 01000a0044150000 00000000200f0000 >>>> 0000000024000000 >>>> [ 73.185245] 01000a0053150000 6b17c7e74a14f0a8 dff7871b1e0aaa88 >>>> 8a4c71a4f0208e6e >>>> [ 73.192715] Call Trace: >>>> [ 73.195168] [<ffffffffad32777b>] crypto_sha256_update+0x5b/0xd0 >>>> [ 73.201187] [<ffffffffad31f3a8>] crypto_shash_update+0x38/0x100 >>>> [ 73.207204] [<ffffffffad31f537>] shash_finup_unaligned+0x17/0x30 >>>> [ 73.213307] [<ffffffffad31f56f>] crypto_shash_finup+0x1f/0x40 >>>> [ 73.219151] [<ffffffffad109bd8>] mod_verify_sig+0x288/0x440 >>>> [ 73.224817] [<ffffffffad10692d>] load_module+0x7d/0x2730 >>>> [ 73.230230] [<ffffffffad104cbe>] ? >>>> copy_module_from_fd.isra.47+0x5e/0x180 >>>> [ 73.237111] [<ffffffffad104d89>] ? >>>> copy_module_from_fd.isra.47+0x129/0x180 >>>> [ 73.244085] [<ffffffffad2f494b>] ? cap_capable+0x5b/0x80 >>>> [ 73.249487] [<ffffffffad109196>] SyS_finit_module+0xa6/0xd0 >>>> [ 73.255155] [<ffffffffad734ca9>] system_call_fastpath+0x12/0x17 >>>> [ 73.261167] Code: 44 09 c6 41 89 ca 44 21 ce 45 21 c2 41 c1 cf 02 44 >>>> 09 d6 41 89 ca 44 03 ad 08 ff ff ff 41 c1 ca 0d 45 31 fa 41 89 cf 41 c1 >>>> cf 16 <45> 31 fa 44 0 >>>> [ 74.457162] sched: RT throttling activated >>>> [ 85.536366] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k >>>> [ 85.542209] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. >>>> [ 86.420339] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) >>>> set to dynamic conservative mode >>>> [ 97.994089] e1000e 0000:00:19.0 eth0: registered PHC clock >>>> [ 98.002096] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) >>>> 80:c1:6e:f8:9f:92 >>>> [ 98.012106] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network >>>> Connection >>>> [ 98.132239] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: >>>> 0100FF-0FF >>>> >>>> >>> >>> >> >> >> > >
