(2012/10/19 0:32), Khalid Aziz wrote:
> On Wed, 2012-10-17 at 15:23 +0900, Takao Indoh wrote:
>> This patch resets PCIe devices at boot time by hot reset when
>> "reset_devices" is specified.
>>
>> Signed-off-by: Takao Indoh <indou.takao at jp.fujitsu.com>
>> ---
>> arch/x86/include/asm/pci-direct.h | 1
>> arch/x86/kernel/setup.c | 3
>> arch/x86/pci/early.c | 353 ++++++++++++++++++++++++++++
>> include/linux/pci.h | 2
>> init/main.c | 4
>> 5 files changed, 361 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/x86/include/asm/pci-direct.h b/arch/x86/include/asm/pci-direct.h
>> index b1e7a45..de30db2 100644
>> --- a/arch/x86/include/asm/pci-direct.h
>> +++ b/arch/x86/include/asm/pci-direct.h
>> @@ -18,4 +18,5 @@ extern int early_pci_allowed(void);
>> extern unsigned int pci_early_dump_regs;
>> extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
>> extern void early_dump_pci_devices(void);
>> +extern void early_reset_pcie_devices(void);
>> #endif /* _ASM_X86_PCI_DIRECT_H */
>> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
>> index a2bb18e..73d3425 100644
>> --- a/arch/x86/kernel/setup.c
>> +++ b/arch/x86/kernel/setup.c
>> @@ -987,6 +987,9 @@ void __init setup_arch(char **cmdline_p)
>> generic_apic_probe();
>>
>> early_quirks();
>> +#ifdef CONFIG_PCI
>> + early_reset_pcie_devices();
>> +#endif
>>
>> /*
>> * Read APIC and some other early information from ACPI tables.
>> diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
>> index d1067d5..df7f4fc 100644
>> --- a/arch/x86/pci/early.c
>> +++ b/arch/x86/pci/early.c
>> @@ -1,5 +1,6 @@
>> #include <linux/kernel.h>
>> #include <linux/pci.h>
>> +#include <linux/bootmem.h>
>> #include <asm/pci-direct.h>
>> #include <asm/io.h>
>> #include <asm/pci_x86.h>
>> @@ -109,3 +110,355 @@ void early_dump_pci_devices(void)
>> }
>> }
>> }
>> +
>> +#define PCI_EXP_SAVE_REGS 7
>> +#define pcie_cap_has_devctl(type, flags) 1
>> +#define pcie_cap_has_lnkctl(type, flags) \
>> + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
>> + (type == PCI_EXP_TYPE_ROOT_PORT || \
>> + type == PCI_EXP_TYPE_ENDPOINT || \
>> + type == PCI_EXP_TYPE_LEG_END))
>> +#define pcie_cap_has_sltctl(type, flags) \
>> + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
>> + ((type == PCI_EXP_TYPE_ROOT_PORT) || \
>> + (type == PCI_EXP_TYPE_DOWNSTREAM && \
>> + (flags & PCI_EXP_FLAGS_SLOT))))
>> +#define pcie_cap_has_rtctl(type, flags) \
>> + ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
>> + (type == PCI_EXP_TYPE_ROOT_PORT || \
>> + type == PCI_EXP_TYPE_RC_EC))
>> +
>> +struct save_config {
>> + u32 pci[16];
>> + u16 pcie[PCI_EXP_SAVE_REGS];
>> +};
>> +
>> +struct pcie_dev {
>> + int cap; /* position of PCI Express capability */
>> + int flags; /* PCI_EXP_FLAGS */
>> + struct save_config save; /* saved configration register */
>> +};
>> +
>> +struct pcie_port {
>> + struct list_head dev;
>> + u8 bus;
>> + u8 slot;
>> + u8 func;
>> + u8 secondary;
>> + struct pcie_dev child[PCI_MAX_FUNCTIONS];
>> +};
>> +
>> +static LIST_HEAD(device_list);
>> +static void __init pci_udelay(int loops)
>> +{
>> + while (loops--) {
>> + /* Approximately 1 us */
>> + native_io_delay();
>> + }
>> +}
>> +
>> +/* Derived from drivers/pci/pci.c */
>> +#define PCI_FIND_CAP_TTL 48
>> +static int __init __pci_find_next_cap_ttl(u8 bus, u8 slot, u8 func,
>> + u8 pos, int cap, int *ttl)
>> +{
>> + u8 id;
>> +
>> + while ((*ttl)--) {
>> + pos = read_pci_config_byte(bus, slot, func, pos);
>> + if (pos < 0x40)
>> + break;
>> + pos &= ~3;
>> + id = read_pci_config_byte(bus, slot, func,
>> + pos + PCI_CAP_LIST_ID);
>> + if (id == 0xff)
>> + break;
>> + if (id == cap)
>> + return pos;
>> + pos += PCI_CAP_LIST_NEXT;
>> + }
>> + return 0;
>> +}
>> +
>> +static int __init __pci_find_next_cap(u8 bus, u8 slot, u8 func, u8 pos, int cap)
>> +{
>> + int ttl = PCI_FIND_CAP_TTL;
>> +
>> + return __pci_find_next_cap_ttl(bus, slot, func, pos, cap, &ttl);
>> +}
>> +
>> +static int __init __pci_bus_find_cap_start(u8 bus, u8 slot, u8 func,
>> + u8 hdr_type)
>> +{
>> + u16 status;
>> +
>> + status = read_pci_config_16(bus, slot, func, PCI_STATUS);
>> + if (!(status & PCI_STATUS_CAP_LIST))
>> + return 0;
>> +
>> + switch (hdr_type) {
>> + case PCI_HEADER_TYPE_NORMAL:
>> + case PCI_HEADER_TYPE_BRIDGE:
>> + return PCI_CAPABILITY_LIST;
>> + case PCI_HEADER_TYPE_CARDBUS:
>> + return PCI_CB_CAPABILITY_LIST;
>> + default:
>> + return 0;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int __init early_pci_find_capability(u8 bus, u8 slot, u8 func, int cap)
>> +{
>> + int pos;
>> + u8 type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE);
>> +
>> + pos = __pci_bus_find_cap_start(bus, slot, func, type & 0x7f);
>> + if (pos)
>> + pos = __pci_find_next_cap(bus, slot, func, pos, cap);
>> +
>> + return pos;
>> +}
>> +
>> +static void __init do_reset(u8 bus, u8 slot, u8 func)
>> +{
>> + u16 ctrl;
>> +
>> + printk(KERN_INFO "pci 0000:%02x:%02x.%d reset\n", bus, slot, func);
>> +
>> + /* Assert Secondary Bus Reset */
>> + ctrl = read_pci_config_16(bus, slot, func, PCI_BRIDGE_CONTROL);
>> + ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
>> + write_pci_config_16(bus, slot, func, PCI_BRIDGE_CONTROL, ctrl);
>> +
>> + /*
>> + * PCIe spec requires software to ensure a minimum reset duration
>> + * (Trst == 1ms). We have here 5ms safety margin because pci_udelay is
>> + * not precise.
>> + */
>> + pci_udelay(5000);
>> +
>> + /* De-assert Secondary Bus Reset */
>> + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
>> + write_pci_config_16(bus, slot, func, PCI_BRIDGE_CONTROL, ctrl);
>> +}
>> +
>> +static void __init save_state(unsigned bus, unsigned slot, unsigned func,
>> + struct pcie_dev *dev)
>> +{
>> + int i;
>> + int pcie, flags, pcie_type;
>> + struct save_config *save;
>> +
>> + pcie = dev->cap;
>> + flags = dev->flags;
>> + pcie_type = (flags & PCI_EXP_FLAGS_TYPE) >> 4;
>> + save = &dev->save;
>> +
>> + printk(KERN_INFO "pci 0000:%02x:%02x.%d save state\n", bus, slot, func);
>> +
>> + for (i = 0; i < 16; i++)
>> + save->pci[i] = read_pci_config(bus, slot, func, i * 4);
>> + i = 0;
>> + if (pcie_cap_has_devctl(pcie_type, flags))
>> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_DEVCTL);
>> + if (pcie_cap_has_lnkctl(pcie_type, flags))
>> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_LNKCTL);
>> + if (pcie_cap_has_sltctl(pcie_type, flags))
>> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_SLTCTL);
>> + if (pcie_cap_has_rtctl(pcie_type, flags))
>> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_RTCTL);
>> +
>> + if ((flags & PCI_EXP_FLAGS_VERS) >= 2) {
>> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_DEVCTL2);
>> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_LNKCTL2);
>> + save->pcie[i++] = read_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_SLTCTL2);
>> + }
>> +}
>> +
>> +static void __init restore_state(unsigned bus, unsigned slot, unsigned func,
>> + struct pcie_dev *dev)
>> +{
>> + int i = 0;
>> + int pcie, flags, pcie_type;
>> + struct save_config *save;
>> +
>> + pcie = dev->cap;
>> + flags = dev->flags;
>> + pcie_type = (flags & PCI_EXP_FLAGS_TYPE) >> 4;
>> + save = &dev->save;
>> +
>> + printk(KERN_INFO "pci 0000:%02x:%02x.%d restore state\n",
>> + bus, slot, func);
>> +
>> + if (pcie_cap_has_devctl(pcie_type, flags))
>> + write_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_DEVCTL, save->pcie[i++]);
>> + if (pcie_cap_has_lnkctl(pcie_type, flags))
>> + write_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_LNKCTL, save->pcie[i++]);
>> + if (pcie_cap_has_sltctl(pcie_type, flags))
>> + write_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_SLTCTL, save->pcie[i++]);
>> + if (pcie_cap_has_rtctl(pcie_type, flags))
>> + write_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_RTCTL, save->pcie[i++]);
>> +
>> + if ((flags & PCI_EXP_FLAGS_VERS) >= 2) {
>> + write_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_DEVCTL2, save->pcie[i++]);
>> + write_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_LNKCTL2, save->pcie[i++]);
>> + write_pci_config_16(bus, slot, func,
>> + pcie + PCI_EXP_SLTCTL2, save->pcie[i++]);
>> + }
>> +
>> + for (i = 15; i >= 0; i--)
>> + write_pci_config(bus, slot, func, i * 4, save->pci[i]);
>> +}
>> +
>> +static void __init find_pcie_device(unsigned bus, unsigned slot, unsigned func)
>> +{
>> + int f, count;
>> + int pcie, pcie_type;
>> + u8 type;
>> + u16 vendor, flags;
>> + u32 class;
>> + int secondary;
>> + struct pcie_port *port;
>> + int pcie_cap[PCI_MAX_FUNCTIONS];
>> + int pcie_flags[PCI_MAX_FUNCTIONS];
>> +
>> + pcie = early_pci_find_capability(bus, slot, func, PCI_CAP_ID_EXP);
>> + if (!pcie)
>> + return;
>> +
>> + flags = read_pci_config_16(bus, slot, func, pcie + PCI_EXP_FLAGS);
>> + pcie_type = (flags & PCI_EXP_FLAGS_TYPE) >> 4;
>> + if ((pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
>> + (pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
>> + return;
>> +
>> + type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE);
>> + if ((type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
>> + return;
>> + secondary = read_pci_config_byte(bus, slot, func, PCI_SECONDARY_BUS);
>> +
>> + memset(pcie_cap, 0, sizeof(pcie_cap));
>> + memset(pcie_flags, 0, sizeof(pcie_flags));
>> + for (count = 0, f = 0; f < PCI_MAX_FUNCTIONS; f++) {
>> + vendor = read_pci_config_16(secondary, 0, f, PCI_VENDOR_ID);
>> + if (vendor == 0xffff)
>> + continue;
>> +
>> + pcie = early_pci_find_capability(secondary, 0, f,
>> + PCI_CAP_ID_EXP);
>> + if (!pcie)
>> + continue;
>> +
>> + flags = read_pci_config_16(secondary, 0, f,
>> + pcie + PCI_EXP_FLAGS);
>> + pcie_type = (flags & PCI_EXP_FLAGS_TYPE) >> 4;
>> + if ((pcie_type == PCI_EXP_TYPE_UPSTREAM) ||
>> + (pcie_type == PCI_EXP_TYPE_PCI_BRIDGE))
>> + /* Don't reset switch, bridge */
>> + return;
>> +
>> + class = read_pci_config(secondary, 0, f, PCI_CLASS_REVISION);
>> + if ((class >> 24) == PCI_BASE_CLASS_DISPLAY)
>> + /* Don't reset VGA device */
>> + return;
>> +
>> + count++;
>> + pcie_cap[f] = pcie;
>> + pcie_flags[f] = flags;
>> + }
>> +
>> + if (!count)
>> + return;
>> +
>> + port = (struct pcie_port *)alloc_bootmem(sizeof(struct pcie_port));
>> + if (port == NULL) {
>> + printk(KERN_ERR "pci 0000:%02x:%02x.%d alloc_bootmem failed\n",
>> + bus, slot, func);
>> + return;
>> + }
>> + memset(port, 0, sizeof(*port));
>> + port->bus = bus;
>> + port->slot = slot;
>> + port->func = func;
>> + port->secondary = secondary;
>> + for (f = 0; f < PCI_MAX_FUNCTIONS; f++) {
>> + if (pcie_cap[f] != 0) {
>> + port->child[f].cap = pcie_cap[f];
>> + port->child[f].flags = pcie_flags[f];
>> + save_state(secondary, 0, f, &port->child[f]);
>> + }
>> + }
>> + list_add_tail(&port->dev, &device_list);
>> +}
>> +
>> +void __init early_reset_pcie_devices(void)
>> +{
>> + unsigned bus, slot, func;
>> + struct pcie_port *port, *tmp;
>> +
>> + if (!early_pci_allowed() || !reset_devices)
>> + return;
>> +
>> + /* Find PCIe port and save config registers of its downstream devices */
>> + for (bus = 0; bus < 256; bus++) {
>> + for (slot = 0; slot < 32; slot++) {
>> + for (func = 0; func < PCI_MAX_FUNCTIONS; func++) {
>> + u16 vendor;
>> + u8 type;
>> + vendor = read_pci_config_16(bus, slot, func,
>> + PCI_VENDOR_ID);
>> +
>> + if (vendor == 0xffff)
>> + continue;
>> +
>> + find_pcie_device(bus, slot, func);
>> +
>> + if (func == 0) {
>> + type = read_pci_config_byte(bus, slot,
>> + func,
>> + PCI_HEADER_TYPE);
>> + if (!(type & 0x80))
>> + break;
>> + }
>> + }
>> + }
>> + }
>> +
>> + if (list_empty(&device_list))
>> + return;
>> +
>> + /* Do bus reset */
>> + list_for_each_entry(port, &device_list, dev)
>> + do_reset(port->bus, port->slot, port->func);
>> +
>> + /*
>> + * According to PCIe spec, software must wait a minimum of 100 ms
>> + * before sending a configuration request. We have 500ms safety margin
>> + * here.
>> + */
>> + pci_udelay(500000);
>> +
>> + /* Restore config registers and free memory */
>> + list_for_each_entry_safe(port, tmp, &device_list, dev) {
>> + for (func = 0; func < PCI_MAX_FUNCTIONS; func++)
>> + if (port->child[func].cap)
>> + restore_state(port->secondary, 0, func,
>> + &port->child[func]);
>> + free_bootmem(__pa(port), sizeof(*port));
>> + }
>> +}
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index ee21795..eca3231 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -35,6 +35,8 @@
>> /* Include the ID list */
>> #include <linux/pci_ids.h>
>>
>> +#define PCI_MAX_FUNCTIONS 8
>> +
>> /* pci_slot represents a physical slot */
>> struct pci_slot {
>> struct pci_bus *bus; /* The bus this slot is on */
>> diff --git a/init/main.c b/init/main.c
>> index 9cf77ab..0eb7430 100644
>> --- a/init/main.c
>> +++ b/init/main.c
>> @@ -144,10 +144,10 @@ EXPORT_SYMBOL(reset_devices);
>> static int __init set_reset_devices(char *str)
>> {
>> reset_devices = 1;
>> - return 1;
>> + return 0;
>> }
>>
>> -__setup("reset_devices", set_reset_devices);
>> +early_param("reset_devices", set_reset_devices);
>>
>> static const char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
>> const char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
>>
>>
>> _______________________________________________
>> kexec mailing list
>> kexec at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/kexec
>
> This looks good. Good catch on access to downstream devices after reset.
> It is certainly safer to save all config registers before any resets.
>
> One thing I am concerned about is would a reset affect SR-IOV extended
> capability registers. If so, should save_state() save those registers as
> well? Alex Williamson (cc'd) can possibly comment on that aspect.
Yes, SR-IOV cap register is cleared by reset. For exmaple, SR-IOV spec
says that:
2.2.1. Conventional Reset
Conventional Reset clears VF Enable in the PF. Thus, VFs no longer
exist after a Conventional Reset.
I'm expecting all SR-IOV registers are set up again at kdump kernel boot
time as well as normal boot. But for example if there are registers
which are set up only in BIOS, maybe saving/restoring at reset is
needed.
Thanks,
Takao Indoh
