On 01/11/2012 07:06 PM, Will Deacon wrote:
> On Wed, Jan 11, 2012 at 08:35:41AM +0000, Joonyoung Shim wrote:
>> Hi,
> Hello [adding linux-arm-kernel],
>
>> I have tested kexec to Nuri board using Exynos4210(Dual-core ARM
>> Cortex-A9) on the latest mainline kernel but i am facing one problem.
>>
>> The kernel enabled SMP, kernel_kexec() calls machine_shutdown to stop
>> all cpus except current cpu and jumps to the new kernel but the kernel
>> is hanged soon.
>>
>> I used cpu_down(1) to make disabled cpu1 instead of smp_send_stop of
>> machine_shutdown and it is booted successfully to new kernel.
>>
>> Any ideas?
> I suspect that the secondary CPUs are not being parked correctly in the first
> kernel. For this, you need to implement platform_cpu_kill for your platform.
>
> Given that exynos just does:
>
> int platform_cpu_kill(unsigned int cpu)
> {
> return 1;
> }
>
> then I'm not surprised it doesn't work. Try adding something in there which puts
> the CPU into a state where it can be booted by the next kernel.
Thanks, i will try it.
One more question, generally boot cpu is first cpu(cpu0). If current
cpu is secondary cpu(cpu1), smp_send_stop of machine_shutdown will stop
first cpu and next kernel will try to boot on secondary cpu. Is it
possible?
> I considered adding a purely software mechanism for doing this (in fact, I
> prototyped something up on vexpress) but after discussions with some board
> maintainers it became clear that most SMP SoCs have hardware assists for
> hotplug, and the software approach is really only need for things like the
> ARM development boards.
>
> Will
>
