On Fri, Aug 10, 2012 at 05:39:38PM +0900, HATAYAMA Daisuke wrote: [..] > > I finished benchmarking filtering time and demonstrate the result. > But I failed to collect amount of memory consumption by my mistake. If > they are necessary, I'll again try to collect them. But we have 9 days > vacation starting tommorow, so I'll do that after the vacation. > Thanks a lot for doing this benchmarking. > The machine spec I used is as follows: > > Memory: 2TB > CPU: Intel(R) Xeon(R) CPU E7- 8870 @ 2.40GHz > (8 sockets, 10 cores, 2 threads) > > In the first step, I chosed buffer size 10KB and it took about 3h 45m > 57s. So, next I changed the buffer size to 512KB and measured up to > 8MB. What is this buffer size? Is user supposed to specify it? Is it some fixed size buffer which makedumpfile can use to read in memory and once we cross the buffer size we need to let some data from buffer go? > > The result is as follows: > > | buffer size | time | > |-------------+------------| > | 8 MB | 48.32 sec | > | 4 MB | 55.76 sec | > | 2 MB | 69.91 sec | > | 1 MB | 98.25 sec | > | 512 KB | 154.42 sec | So, on a 2TB system, with 8MB buffer, we could filter and save vmcore in around 48 seconds? Or is it just filtering time. 48 seconds for 2TB system, sounds pretty decent to me. Are these results with existing free_list implementation or with your patches of walking through mem_map array? > > BTW, the existing free_list logic took about 48 sec for the same > vmcore as below. I guess above results were with your patches of walking mem_map array. > > STEP [Excluding free pages ] : 49.846321 seconds > STEP [Excluding unnecessary pages] : 6.339228 seconds > STEP [Excluding free pages ] : 48.595884 seconds > STEP [Excluding unnecessary pages] : 6.530479 seconds > STEP [Excluding free pages ] : 48.598879 seconds > STEP [Excluding unnecessary pages] : 6.527133 seconds > STEP [Excluding free pages ] : 48.602401 seconds > STEP [Excluding unnecessary pages] : 6.502681 seconds > STEP [Excluding free pages ] : 48.602010 seconds > STEP [Excluding unnecessary pages] : 6.469853 seconds > STEP [Excluding free pages ] : 48.601637 seconds > STEP [Excluding unnecessary pages] : 6.431381 seconds > STEP [Excluding free pages ] : 48.601195 seconds > STEP [Excluding unnecessary pages] : 6.416676 seconds > STEP [Excluding free pages ] : 48.602221 seconds > STEP [Excluding unnecessary pages] : 6.387611 seconds > STEP [Excluding free pages ] : 48.589972 seconds > STEP [Excluding unnecessary pages] : 0.816955 seconds So what does above represent. Each step is taking 48 seconds or total time taken to filter vmcore is 48 seconds? What's the buffer size used here. Does that mean that filtering time for both mem_map array approach and free_list approach are same? Thanks Vivek
