Americo,
And the reason we have no bootmem debug is because the Ubuntu
2.6.38-8-server kernel was build with CONFIG_NO_BOOTMEM.... Seems like
that could be a problem.
tim
On Thu, 2011-11-17 at 08:08 -0800, Tim Hartrick wrote:
> Americo,
>
> Here is the dmesg from 2.6.38-8-server with bootmem_debug set.
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.38-8-server (buildd at allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:49:04 UTC 2011 (Ubuntu 2.6.38-8.42-server 2.6.38.2)
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-server root=UUID=ea7a5a27-d58f-469f-a19c-3e65b69587f6 ro crashkernel=512M bootmem_debug console=ttyS0,115200n8
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f679000 (usable)
> [ 0.000000] BIOS-e820: 000000007f679000 - 000000007f68f000 (reserved)
> [ 0.000000] BIOS-e820: 000000007f68f000 - 000000007f6ce000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000007f6ce000 - 0000000080000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000c80000000 (usable)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI 2.6 present.
> [ 0.000000] DMI: Dell Inc. PowerEdge R710/0YDJK3, BIOS 2.1.15 09/02/2010
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> [ 0.000000] No AGP bridge found
> [ 0.000000] last_pfn = 0xc80000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-D3FFF write-protect
> [ 0.000000] D4000-EBFFF uncachable
> [ 0.000000] EC000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
> [ 0.000000] 1 base 0100000000 mask FF00000000 write-back
> [ 0.000000] 2 base 0200000000 mask FE00000000 write-back
> [ 0.000000] 3 base 0400000000 mask FC00000000 write-back
> [ 0.000000] 4 base 0800000000 mask FC00000000 write-back
> [ 0.000000] 5 base 0C00000000 mask FF80000000 write-back
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
> [ 0.000000] last_pfn = 0x7f679 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
> [ 0.000000] initial memory mapped : 0 - 20000000
> [ 0.000000] init_memory_mapping: 0000000000000000-000000007f679000
> [ 0.000000] 0000000000 - 007f600000 page 2M
> [ 0.000000] 007f600000 - 007f679000 page 4k
> [ 0.000000] kernel direct mapping tables up to 7f679000 @ 1fffc000-20000000
> [ 0.000000] init_memory_mapping: 0000000100000000-0000000c80000000
> [ 0.000000] 0100000000 - 0c80000000 page 2M
> [ 0.000000] kernel direct mapping tables up to c80000000 @ 7f646000-7f679000
> [ 0.000000] RAMDISK: 3670c000 - 3737e000
> [ 0.000000] crashkernel reservation failed - No suitable area found.
> [ 0.000000] ACPI: RSDP 00000000000f0a90 00024 (v02 DELL )
> [ 0.000000] ACPI: XSDT 00000000000f0b94 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: FACP 000000007f6b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: DSDT 000000007f68f000 03D5A (v01 DELL PE_SC3 00000001 INTL 20050624)
> [ 0.000000] ACPI: FACS 000000007f6b6000 00040
> [ 0.000000] ACPI: APIC 000000007f6b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: SPCR 000000007f6b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: HPET 000000007f6b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: DM__ 000000007f6b3668 001B0 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: MCFG 000000007f6b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: WD__ 000000007f6b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: SLIC 000000007f6b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: ERST 000000007f692edc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: HEST 000000007f69314c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: BERT 000000007f692d5c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: EINJ 000000007f692d8c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: SRAT 000000007f6b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: TCPA 000000007f6b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
> [ 0.000000] ACPI: SSDT 000000007f6b7000 01EF4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 0
> [ 0.000000] SRAT: PXM 2 -> APIC 0x00 -> Node 1
> [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 0
> [ 0.000000] SRAT: PXM 2 -> APIC 0x02 -> Node 1
> [ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 0
> [ 0.000000] SRAT: PXM 2 -> APIC 0x04 -> Node 1
> [ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 0
> [ 0.000000] SRAT: PXM 2 -> APIC 0x06 -> Node 1
> [ 0.000000] SRAT: Node 1 PXM 2 0-80000000
> [ 0.000000] SRAT: Node 1 PXM 2 100000000-680000000
> [ 0.000000] SRAT: Node 0 PXM 1 680000000-c80000000
> [ 0.000000] SRAT: Node 1 [0,80000000) + [100000000,680000000) -> [0,680000000)
> [ 0.000000] NUMA: Using 31 for the hash shift.
> [ 0.000000] Initmem setup node 0 0000000680000000-0000000c80000000
> [ 0.000000] NODE_DATA [0000000c7fffb000 - 0000000c7fffffff]
> [ 0.000000] Initmem setup node 1 0000000000000000-0000000680000000
> [ 0.000000] NODE_DATA [000000067fffb000 - 000000067fffffff]
> [ 0.000000] [ffffea0000000000-ffffea0016bfffff] PMD -> [ffff880667e00000-ffff88067cdfffff] on node 1
> [ 0.000000] [ffffea0016c00000-ffffea002bbfffff] PMD -> [ffff880c67e00000-ffff880c7cdfffff] on node 0
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00c80000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[4] active PFN ranges
> [ 0.000000] 1: 0x00000010 -> 0x000000a0
> [ 0.000000] 1: 0x00000100 -> 0x0007f679
> [ 0.000000] 1: 0x00100000 -> 0x00680000
> [ 0.000000] 0: 0x00680000 -> 0x00c80000
> [ 0.000000] On node 0 totalpages: 6291456
> [ 0.000000] Normal zone: 86016 pages used for memmap
> [ 0.000000] Normal zone: 6205440 pages, LIFO batch:31
> [ 0.000000] On node 1 totalpages: 6288905
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 8 pages reserved
> [ 0.000000] DMA zone: 3920 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 14280 pages used for memmap
> [ 0.000000] DMA32 zone: 503473 pages, LIFO batch:31
> [ 0.000000] Normal zone: 78848 pages used for memmap
> [ 0.000000] Normal zone: 5688320 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
> [ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
> [ 0.000000] SMP: Allowing 32 CPUs, 24 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 72
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 000000007f679000 - 000000007f68f000
> [ 0.000000] PM: Registered nosave memory: 000000007f68f000 - 000000007f6ce000
> [ 0.000000] PM: Registered nosave memory: 000000007f6ce000 - 0000000080000000
> [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
> [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
> [ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
> [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:2
> [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007f200000 s84416 r8192 d22080 u131072
> [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u131072 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
> [ 0.000000] pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
> [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 12401153
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-server root=UUID=ea7a5a27-d58f-469f-a19c-3e65b69587f6 ro crashkernel=512M bootmem_debug console=ttyS0,115200n8
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [ 0.000000] Memory: 49536972k/52428800k available (6023k kernel code, 2107356k absent, 784472k reserved, 5025k data, 880k init)
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU-based detection of stalled CPUs is disabled.
> [ 0.000000] NR_IRQS:16640 nr_irqs:1480 16
> [ 0.000000] Extended CMOS year: 2000
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [ttyS0] enabled
> [ 0.000000] allocated 503316480 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.010000] Detected 2128.307 MHz processor.
> [ 0.000012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.61 BogoMIPS (lpj=21283070)
> [ 0.010705] pid_max: default: 32768 minimum: 301
> [ 0.015357] Security Framework initialized
> [ 0.019454] AppArmor: AppArmor initialized
> [ 0.023545] Yama: becoming mindful.
> [ 0.033043] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
> [ 0.057205] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
> [ 0.071455] Mount-cache hash table entries: 256
> [ 0.076206] Initializing cgroup subsys ns
> [ 0.080204] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
> [ 0.089076] Initializing cgroup subsys cpuacct
> [ 0.093516] Initializing cgroup subsys memory
> [ 0.097884] Initializing cgroup subsys devices
> [ 0.102320] Initializing cgroup subsys freezer
> [ 0.106749] Initializing cgroup subsys net_cls
> [ 0.111185] Initializing cgroup subsys blkio
> [ 0.115485] CPU: Physical Processor ID: 1
> [ 0.119479] CPU: Processor Core ID: 0
> [ 0.123140] mce: CPU supports 9 MCE banks
> [ 0.127147] CPU0: Thermal monitoring enabled (TM1)
> [ 0.131936] using mwait in idle threads.
> [ 0.138215] ACPI: Core revision 20110112
> [ 0.143937] ftrace: allocating 24611 entries in 97 pages
> [ 0.158287] Setting APIC routing to physical flat
> [ 0.163454] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.269421] CPU0: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05
> [ 0.390085] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
> [ 0.397233] ... version: 3
> [ 0.401231] ... bit width: 48
> [ 0.405313] ... generic registers: 4
> [ 0.409309] ... value mask: 0000ffffffffffff
> [ 0.414604] ... max period: 000000007fffffff
> [ 0.419898] ... fixed-purpose events: 3
> [ 0.423894] ... event mask: 000000070000000f
> [ 0.429851] Booting Node 1, Processors #1 Ok.
> [ 0.610670] Booting Node 0, Processors #2 Ok.
> [ 0.790681] Booting Node 1, Processors #3 Ok.
> [ 0.970559] Booting Node 0, Processors #4 Ok.
> [ 1.150479] Booting Node 1, Processors #5 Ok.
> [ 1.330327] Booting Node 0, Processors #6 Ok.
> [ 1.510397] Booting Node 1, Processors #7
> [ 1.689646] Brought up 8 CPUs
> [ 1.692788] Total of 8 processors activated (34048.77 BogoMIPS).
> [ 1.702626] devtmpfs: initialized
> [ 1.710683] print_constraints: dummy:
> [ 1.714448] Time: 16:03:35 Date: 11/17/11
> [ 1.718592] NET: Registered protocol family 16
> [ 1.723149] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [ 1.723170] Trying to unpack rootfs image as initramfs...
> [ 1.736089] ACPI: bus type pci registered
> [ 1.740218] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 1.749508] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> [ 1.782739] PCI: Using configuration type 1 for base access
> [ 1.791077] bio: create slab <bio-0> at 0
> [ 1.795896] ACPI: EC: Look up EC in DSDT
> [ 1.796885] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> [ 1.804192] ACPI: Interpreter enabled
> [ 1.807844] ACPI: (supports S0 S4 S5)
> [ 1.811543] ACPI: Using IOAPIC for interrupt routing
> [ 1.820247] ACPI: No dock devices found.
> [ 1.824271] HEST: Table parsing has been initialized.
> [ 1.829310] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 1.838686] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 1.845063] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
> [ 1.851664] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
> [ 1.858264] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
> [ 1.865561] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfdffffff]
> [ 1.872856] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
> [ 1.880175] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600
> [ 1.880230] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
> [ 1.880234] pci 0000:00:00.0: PME# disabled
> [ 1.880258] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
> [ 1.880305] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 1.880308] pci 0000:00:01.0: PME# disabled
> [ 1.880331] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
> [ 1.880378] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
> [ 1.880382] pci 0000:00:03.0: PME# disabled
> [ 1.880403] pci 0000:00:04.0: [8086:340b] type 1 class 0x000604
> [ 1.880450] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
> [ 1.880454] pci 0000:00:04.0: PME# disabled
> [ 1.880475] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604
> [ 1.880522] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
> [ 1.880526] pci 0000:00:05.0: PME# disabled
> [ 1.880547] pci 0000:00:06.0: [8086:340d] type 1 class 0x000604
> [ 1.880594] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
> [ 1.880598] pci 0000:00:06.0: PME# disabled
> [ 1.880619] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
> [ 1.880667] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> [ 1.880670] pci 0000:00:07.0: PME# disabled
> [ 1.880693] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604
> [ 1.880740] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
> [ 1.880744] pci 0000:00:09.0: PME# disabled
> [ 1.880772] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
> [ 1.880841] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
> [ 1.880903] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
> [ 1.880975] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
> [ 1.881019] pci 0000:00:1a.0: reg 20: [io 0xec40-0xec5f]
> [ 1.881063] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
> [ 1.881106] pci 0000:00:1a.1: reg 20: [io 0xec60-0xec7f]
> [ 1.881161] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
> [ 1.881183] pci 0000:00:1a.7: reg 10: [mem 0xdf0ff800-0xdf0ffbff]
> [ 1.881256] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 1.881261] pci 0000:00:1a.7: PME# disabled
> [ 1.881283] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
> [ 1.881326] pci 0000:00:1d.0: reg 20: [io 0xec80-0xec9f]
> [ 1.881370] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
> [ 1.881413] pci 0000:00:1d.1: reg 20: [io 0xeca0-0xecbf]
> [ 1.881469] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
> [ 1.881491] pci 0000:00:1d.7: reg 10: [mem 0xdf0ffc00-0xdf0fffff]
> [ 1.881565] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 1.881569] pci 0000:00:1d.7: PME# disabled
> [ 1.881588] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
> [ 1.881645] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
> [ 1.881727] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
> [ 1.889279] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
> [ 1.896839] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
> [ 1.904439] pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101
> [ 1.904458] pci 0000:00:1f.2: reg 10: [io 0xec10-0xec17]
> [ 1.904466] pci 0000:00:1f.2: reg 14: [io 0xec08-0xec0b]
> [ 1.904474] pci 0000:00:1f.2: reg 18: [io 0xec18-0xec1f]
> [ 1.904482] pci 0000:00:1f.2: reg 1c: [io 0xec0c-0xec0f]
> [ 1.904491] pci 0000:00:1f.2: reg 20: [io 0xec20-0xec2f]
> [ 1.904499] pci 0000:00:1f.2: reg 24: [io 0xec30-0xec3f]
> [ 1.904594] pci 0000:01:00.0: [14e4:1639] type 0 class 0x000200
> [ 1.904612] pci 0000:01:00.0: reg 10: [mem 0xd6000000-0xd7ffffff 64bit]
> [ 1.904679] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
> [ 1.904684] pci 0000:01:00.0: PME# disabled
> [ 1.904715] pci 0000:01:00.1: [14e4:1639] type 0 class 0x000200
> [ 1.904731] pci 0000:01:00.1: reg 10: [mem 0xd8000000-0xd9ffffff 64bit]
> [ 1.904797] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
> [ 1.904801] pci 0000:01:00.1: PME# disabled
> [ 1.904827] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 1.910046] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.910050] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
> [ 1.910055] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.910110] pci 0000:02:00.0: [14e4:1639] type 0 class 0x000200
> [ 1.910126] pci 0000:02:00.0: reg 10: [mem 0xda000000-0xdbffffff 64bit]
> [ 1.910193] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 1.910197] pci 0000:02:00.0: PME# disabled
> [ 1.910228] pci 0000:02:00.1: [14e4:1639] type 0 class 0x000200
> [ 1.910244] pci 0000:02:00.1: reg 10: [mem 0xdc000000-0xddffffff 64bit]
> [ 1.910310] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
> [ 1.910314] pci 0000:02:00.1: PME# disabled
> [ 1.910338] pci 0000:00:03.0: PCI bridge to [bus 02-02]
> [ 1.915550] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.915554] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
> [ 1.915559] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.915610] pci 0000:03:00.0: [1000:0058] type 0 class 0x000100
> [ 1.915622] pci 0000:03:00.0: reg 10: [io 0xfc00-0xfcff]
> [ 1.915634] pci 0000:03:00.0: reg 14: [mem 0xdf2ec000-0xdf2effff 64bit]
> [ 1.915646] pci 0000:03:00.0: reg 1c: [mem 0xdf2f0000-0xdf2fffff 64bit]
> [ 1.915662] pci 0000:03:00.0: reg 30: [mem 0xdf100000-0xdf1fffff pref]
> [ 1.915684] pci 0000:03:00.0: supports D1 D2
> [ 1.915703] pci 0000:00:04.0: PCI bridge to [bus 03-03]
> [ 1.920921] pci 0000:00:04.0: bridge window [io 0xf000-0xffff]
> [ 1.920925] pci 0000:00:04.0: bridge window [mem 0xdf100000-0xdf2fffff]
> [ 1.920931] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.920971] pci 0000:00:05.0: PCI bridge to [bus 04-04]
> [ 1.926184] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.926188] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> [ 1.926194] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.926235] pci 0000:00:06.0: PCI bridge to [bus 05-05]
> [ 1.931451] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.931455] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> [ 1.931461] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.931499] pci 0000:00:07.0: PCI bridge to [bus 06-06]
> [ 1.936712] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.936716] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> [ 1.936721] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.936760] pci 0000:00:09.0: PCI bridge to [bus 07-07]
> [ 1.941978] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.941982] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> [ 1.941988] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> [ 1.942028] pci 0000:08:03.0: [102b:0532] type 0 class 0x000300
> [ 1.942049] pci 0000:08:03.0: reg 10: [mem 0xd5800000-0xd5ffffff pref]
> [ 1.942059] pci 0000:08:03.0: reg 14: [mem 0xde7fc000-0xde7fffff]
> [ 1.942069] pci 0000:08:03.0: reg 18: [mem 0xde800000-0xdeffffff]
> [ 1.942102] pci 0000:08:03.0: reg 30: [mem 0x00000000-0x0000ffff pref]
> [ 1.942167] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
> [ 1.949200] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
> [ 1.949206] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
> [ 1.949212] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
> [ 1.949215] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> [ 1.949217] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> [ 1.949220] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> [ 1.949222] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfdffffff] (subtractive decode)
> [ 1.949224] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
> [ 1.949262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 1.949739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
> [ 1.949809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
> [ 1.949876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
> [ 1.949942] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
> [ 1.950009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
> [ 1.950075] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
> [ 1.950145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
> [ 1.950220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
> [ 1.953362] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
> [ 1.960298] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
> [ 1.967239] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
> [ 1.974176] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5
> [ 1.979156] Freeing initrd memory: 12744k freed
> [ 1.983961] 6 7 *10 11 14 15)
> [ 1.987200] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
> [ 1.994232] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
> [ 2.001158] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
> [ 2.009225] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
> [ 2.016262] vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none
> [ 2.024333] vgaarb: loaded
> [ 2.027212] SCSI subsystem initialized
> [ 2.031034] libata version 3.00 loaded.
> [ 2.031078] usbcore: registered new interface driver usbfs
> [ 2.036560] usbcore: registered new interface driver hub
> [ 2.041885] usbcore: registered new device driver usb
> [ 2.047056] wmi: Mapper loaded
> [ 2.050104] PCI: Using ACPI for IRQ routing
> [ 2.054273] PCI: pci_cache_line_size set to 64 bytes
> [ 2.054359] reserve RAM buffer: 000000007f679000 - 000000007fffffff
> [ 2.054481] NetLabel: Initializing
> [ 2.057870] NetLabel: domain hash size = 128
> [ 2.062214] NetLabel: protocols = UNLABELED CIPSOv4
> [ 2.067179] NetLabel: unlabeled traffic allowed by default
> [ 2.072782] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> [ 2.079816] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [ 2.084986] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> [ 2.149508] Switching to clocksource hpet
> [ 2.159321] Switched to NOHz mode on CPU #0
> [ 2.159374] Switched to NOHz mode on CPU #5
> [ 2.159385] Switched to NOHz mode on CPU #4
> [ 2.159388] Switched to NOHz mode on CPU #1
> [ 2.159433] Switched to NOHz mode on CPU #2
> [ 2.159447] Switched to NOHz mode on CPU #3
> [ 2.159450] Switched to NOHz mode on CPU #7
> [ 2.159459] Switched to NOHz mode on CPU #6
> [ 2.162123] AppArmor: AppArmor Filesystem Enabled
> [ 2.162158] pnp: PnP ACPI init
> [ 2.162178] ACPI: bus type pnp registered
> [ 2.162352] pnp 00:00: [bus 00-ff]
> [ 2.162354] pnp 00:00: [io 0x0cf8-0x0cff]
> [ 2.162357] pnp 00:00: [io 0x0000-0x0cf7 window]
> [ 2.162359] pnp 00:00: [io 0x0d00-0xffff window]
> [ 2.162362] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> [ 2.162364] pnp 00:00: [mem 0x80000000-0xfdffffff window]
> [ 2.162366] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
> [ 2.162435] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
> [ 2.162504] pnp 00:01: [io 0x0080-0x009f]
> [ 2.162506] pnp 00:01: [io 0x0000-0x001f]
> [ 2.162508] pnp 00:01: [io 0x00c0-0x00df]
> [ 2.162510] pnp 00:01: [dma 4]
> [ 2.162549] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 2.162574] pnp 00:02: [io 0x00f0-0x00ff]
> [ 2.162586] pnp 00:02: [irq 13]
> [ 2.162624] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 2.162651] pnp 00:03: [io 0x0061]
> [ 2.162725] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 2.162752] pnp 00:04: [io 0x0070-0x007f]
> [ 2.162759] pnp 00:04: [irq 8]
> [ 2.162797] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 2.163012] pnp 00:05: [io 0x02f8-0x02ff]
> [ 2.163019] pnp 00:05: [irq 3]
> [ 2.163150] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 2.163358] pnp 00:06: [io 0x03f8-0x03ff]
> [ 2.163365] pnp 00:06: [irq 4]
> [ 2.163494] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 2.164327] pnp 00:07: [io 0x0800-0x087f]
> [ 2.164329] pnp 00:07: [io 0x00e0-0x00e7]
> [ 2.164331] pnp 00:07: [io 0x0880-0x08ff]
> [ 2.164333] pnp 00:07: [io 0x0900-0x091f]
> [ 2.164335] pnp 00:07: [io 0x0920-0x0923]
> [ 2.164336] pnp 00:07: [io 0x0924]
> [ 2.164338] pnp 00:07: [io 0x0c00-0x0c7f]
> [ 2.164340] pnp 00:07: [io 0x0ca0-0x0ca7]
> [ 2.164342] pnp 00:07: [io 0x0ca9-0x0cab]
> [ 2.164344] pnp 00:07: [io 0x0cad-0x0caf]
> [ 2.164346] pnp 00:07: [io 0x0060]
> [ 2.164347] pnp 00:07: [io 0x0064]
> [ 2.164421] system 00:07: [io 0x0800-0x087f] has been reserved
> [ 2.164424] system 00:07: [io 0x0880-0x08ff] has been reserved
> [ 2.164427] system 00:07: [io 0x0900-0x091f] has been reserved
> [ 2.164430] system 00:07: [io 0x0920-0x0923] has been reserved
> [ 2.164432] system 00:07: [io 0x0924] has been reserved
> [ 2.164435] system 00:07: [io 0x0c00-0x0c7f] has been reserved
> [ 2.164438] system 00:07: [io 0x0ca0-0x0ca7] has been reserved
> [ 2.164440] system 00:07: [io 0x0ca9-0x0cab] has been reserved
> [ 2.164443] system 00:07: [io 0x0cad-0x0caf] has been reserved
> [ 2.164447] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 2.164507] pnp 00:08: [io 0x0ca8]
> [ 2.164509] pnp 00:08: [io 0x0cac]
> [ 2.164511] pnp 00:08: [irq 0 disabled]
> [ 2.164575] system 00:08: [io 0x0ca8] has been reserved
> [ 2.164578] system 00:08: [io 0x0cac] has been reserved
> [ 2.164582] system 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
> [ 2.165237] pnp 00:09: [mem 0xe0000000-0xefffffff]
> [ 2.165305] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
> [ 2.165308] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 2.165367] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
> [ 2.165409] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 2.165433] pnp 00:0b: [mem 0xfed90000-0xfed91fff]
> [ 2.165505] system 00:0b: [mem 0xfed90000-0xfed91fff] has been reserved
> [ 2.165509] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 2.165730] pnp: PnP ACPI: found 12 devices
> [ 2.165732] ACPI: ACPI bus type pnp unregistered
> [ 2.172579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 2.172581] pci 0000:00:01.0: bridge window [io disabled]
> [ 2.172587] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff]
> [ 2.172590] pci 0000:00:01.0: bridge window [mem pref disabled]
> [ 2.172596] pci 0000:00:03.0: PCI bridge to [bus 02-02]
> [ 2.172598] pci 0000:00:03.0: bridge window [io disabled]
> [ 2.172603] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff]
> [ 2.172607] pci 0000:00:03.0: bridge window [mem pref disabled]
> [ 2.172613] pci 0000:00:04.0: PCI bridge to [bus 03-03]
> [ 2.172616] pci 0000:00:04.0: bridge window [io 0xf000-0xffff]
> [ 2.172621] pci 0000:00:04.0: bridge window [mem 0xdf100000-0xdf2fffff]
> [ 2.172624] pci 0000:00:04.0: bridge window [mem pref disabled]
> [ 2.172630] pci 0000:00:05.0: PCI bridge to [bus 04-04]
> [ 2.172632] pci 0000:00:05.0: bridge window [io disabled]
> [ 2.172636] pci 0000:00:05.0: bridge window [mem disabled]
> [ 2.172640] pci 0000:00:05.0: bridge window [mem pref disabled]
> [ 2.172646] pci 0000:00:06.0: PCI bridge to [bus 05-05]
> [ 2.172647] pci 0000:00:06.0: bridge window [io disabled]
> [ 2.172652] pci 0000:00:06.0: bridge window [mem disabled]
> [ 2.172655] pci 0000:00:06.0: bridge window [mem pref disabled]
> [ 2.172661] pci 0000:00:07.0: PCI bridge to [bus 06-06]
> [ 2.172663] pci 0000:00:07.0: bridge window [io disabled]
> [ 2.172667] pci 0000:00:07.0: bridge window [mem disabled]
> [ 2.172671] pci 0000:00:07.0: bridge window [mem pref disabled]
> [ 2.172677] pci 0000:00:09.0: PCI bridge to [bus 07-07]
> [ 2.172678] pci 0000:00:09.0: bridge window [io disabled]
> [ 2.172683] pci 0000:00:09.0: bridge window [mem disabled]
> [ 2.172686] pci 0000:00:09.0: bridge window [mem pref disabled]
> [ 2.172696] pci 0000:08:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref]
> [ 2.172699] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
> [ 2.172701] pci 0000:00:1e.0: bridge window [io disabled]
> [ 2.172707] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
> [ 2.172712] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref]
> [ 2.172743] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
> [ 2.172748] pci 0000:00:01.0: setting latency timer to 64
> [ 2.172755] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
> [ 2.172759] pci 0000:00:03.0: setting latency timer to 64
> [ 2.172765] pci 0000:00:04.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
> [ 2.172769] pci 0000:00:04.0: setting latency timer to 64
> [ 2.172776] pci 0000:00:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
> [ 2.172779] pci 0000:00:05.0: setting latency timer to 64
> [ 2.172786] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
> [ 2.172790] pci 0000:00:06.0: setting latency timer to 64
> [ 2.172796] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
> [ 2.172800] pci 0000:00:07.0: setting latency timer to 64
> [ 2.172806] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
> [ 2.172810] pci 0000:00:09.0: setting latency timer to 64
> [ 2.172818] pci 0000:00:1e.0: setting latency timer to 64
> [ 2.172823] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 2.172825] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 2.172828] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 2.172830] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfdffffff]
> [ 2.172832] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
> [ 2.172835] pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd9ffffff]
> [ 2.172838] pci_bus 0000:02: resource 1 [mem 0xda000000-0xddffffff]
> [ 2.172840] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
> [ 2.172843] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf2fffff]
> [ 2.172846] pci_bus 0000:08: resource 1 [mem 0xde000000-0xdeffffff]
> [ 2.172848] pci_bus 0000:08: resource 2 [mem 0xd5800000-0xd5ffffff 64bit pref]
> [ 2.172851] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
> [ 2.172853] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
> [ 2.172856] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
> [ 2.172858] pci_bus 0000:08: resource 7 [mem 0x80000000-0xfdffffff]
> [ 2.172861] pci_bus 0000:08: resource 8 [mem 0xfed40000-0xfed44fff]
> [ 2.172920] NET: Registered protocol family 2
> [ 2.173508] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 2.175482] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> [ 2.177628] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 2.177869] TCP: Hash tables configured (established 524288 bind 65536)
> [ 2.177872] TCP reno registered
> [ 2.177993] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
> [ 2.178392] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
> [ 2.178959] NET: Registered protocol family 1
> [ 2.583337] pci 0000:08:03.0: Boot video device
> [ 2.583350] PCI: CLS 64 bytes, default 64
> [ 2.583353] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 2.589777] Placing 64MB software IO TLB between ffff88007b200000 - ffff88007f200000
> [ 2.597504] software IO TLB at phys 0x7b200000 - 0x7f200000
> [ 2.603934] audit: initializing netlink socket (disabled)
> [ 2.609325] type=2000 audit(1321545815.430:1): initialized
> [ 2.637065] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 2.645786] VFS: Disk quotas dquot_6.5.2
> [ 2.649787] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 2.657152] fuse init (API version 7.16)
> [ 2.661184] msgmni has been set to 32768
> [ 2.665402] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 2.672815] io scheduler noop registered
> [ 2.676730] io scheduler deadline registered (default)
> [ 2.681903] io scheduler cfq registered
> [ 2.686144] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 2.691729] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 2.698379] intel_idle: MWAIT substates: 0x1120
> [ 2.698396] intel_idle: v0.4 model 0x1A
> [ 2.698398] intel_idle: lapic_timer_reliable_states 0x2
> [ 2.698598] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> [ 2.705982] ACPI: Power Button [PWRF]
> [ 2.709761] ACPI: acpi_idle yielding to intel_idle
> [ 2.712230] ERST: Error Record Serialization Table (ERST) support is initialized.
> [ 2.719782] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 2.746699] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 2.893761] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 2.955909] 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 2.982132] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 2.988074] Linux agpgart interface v0.103
> [ 2.993834] brd: module loaded
> [ 2.997645] loop: module loaded
> [ 3.000882] i2c-core: driver [adp5520] using legacy suspend method
> [ 3.007051] i2c-core: driver [adp5520] using legacy resume method
> [ 3.013258] ata_piix 0000:00:1f.2: version 2.13
> [ 3.013284] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
> [ 3.020402] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> [ 3.183113] ata_piix 0000:00:1f.2: setting latency timer to 64
> [ 3.183400] scsi0 : ata_piix
> [ 3.186420] scsi1 : ata_piix
> [ 3.189338] ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
> [ 3.196467] ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
> [ 3.203959] Fixed MDIO Bus: probed
> [ 3.207384] PPP generic driver version 2.4.2
> [ 3.211706] tun: Universal TUN/TAP device driver, 1.6
> [ 3.216750] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
> [ 3.223035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 3.229575] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
> [ 3.236720] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 3.236724] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 3.241978] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> [ 3.249417] ehci_hcd 0000:00:1a.7: debug port 1
> [ 3.257809] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
> [ 3.257830] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
> [ 3.283057] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 3.288935] hub 1-0:1.0: USB hub found
> [ 3.292675] hub 1-0:1.0: 4 ports detected
> [ 3.296772] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> [ 3.303911] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 3.303915] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 3.309173] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> [ 3.316610] ehci_hcd 0000:00:1d.7: debug port 1
> [ 3.325006] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
> [ 3.325022] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
> [ 3.353028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 3.358891] hub 2-0:1.0: USB hub found
> [ 3.362631] hub 2-0:1.0: 4 ports detected
> [ 3.366720] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 3.372895] uhci_hcd: USB Universal Host Controller Interface driver
> [ 3.379308] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 3.386434] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 3.386438] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 3.391693] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> [ 3.399126] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
> [ 3.405009] hub 3-0:1.0: USB hub found
> [ 3.408748] hub 3-0:1.0: 2 ports detected
> [ 3.412826] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
> [ 3.419953] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 3.419957] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 3.425232] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> [ 3.432662] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
> [ 3.438549] hub 4-0:1.0: USB hub found
> [ 3.442288] hub 4-0:1.0: 2 ports detected
> [ 3.446366] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> [ 3.453493] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 3.453497] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 3.458749] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
> [ 3.466202] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
> [ 3.472083] hub 5-0:1.0: USB hub found
> [ 3.475829] hub 5-0:1.0: 2 ports detected
> [ 3.479912] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
> [ 3.487037] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 3.487040] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 3.492296] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
> [ 3.503027] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
> [ 3.508905] hub 6-0:1.0: USB hub found
> [ 3.512643] hub 6-0:1.0: 2 ports detected
> [ 3.516777] i8042: PNP: No PS/2 controller found. Probing ports directly.
> [ 3.526267] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 3.531221] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 3.536381] mousedev: PS/2 mouse device common for all mice
> [ 3.542041] rtc_cmos 00:04: RTC can wake from S4
> [ 3.579073] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
> [ 3.585185] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
> [ 3.591957] device-mapper: uevent: version 1.0.3
> [ 3.596676] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel at redhat.com
> [ 3.602926] Refined TSC clocksource calibration: 2127.999 MHz.
> [ 3.602929] Switching to clocksource tsc
> [ 3.614875] usb 1-3: new high speed USB device using ehci_hcd and address 2
> [ 3.614925] device-mapper: multipath: version 1.2.0 loaded
> [ 3.614928] device-mapper: multipath round-robin: version 1.0.0 loaded
> [ 3.615339] cpuidle: using governor ladder
> [ 3.638251] cpuidle: using governor menu
> [ 3.642494] TCP cubic registered
> [ 3.645884] NET: Registered protocol family 10
> [ 3.651205] NET: Registered protocol family 17
> [ 3.655667] Registering the dns_resolver key type
> [ 3.660915] PM: Hibernation image not present or could not be loaded.
> [ 3.660928] registered taskstats version 1
> [ 3.665566] Magic number: 3:518:85
> [ 3.669650] rtc_cmos 00:04: setting system clock to 2011-11-17 16:03:37 UTC (1321545817)
> [ 3.677724] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 3.683717] EDD information not available.
> [ 3.713229] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 3.733270] ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
> [ 3.773179] ata1.00: configured for UDMA/100
> [ 3.783717] hub 1-3:1.0: USB hub found
> [ 3.787602] hub 1-3:1.0: 3 ports detected
> [ 3.793882] scsi 0:0:0:0: CD-ROM TEAC DVD-ROM DV-28SW R.2A PQ: 0 ANSI: 5
> [ 3.825488] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
> [ 3.831652] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 3.837003] sr 0:0:0:0: Attached scsi CD-ROM sr0
> [ 3.837082] sr 0:0:0:0: Attached scsi generic sg0 type 5
> [ 4.022811] usb 2-3: new high speed USB device using ehci_hcd and address 3
> [ 4.272752] ata2: failed to resume link (SControl 0)
> [ 4.288554] ata2: SATA link down (SStatus 4 SControl 0)
> [ 4.297198] Freeing unused kernel memory: 880k freed
> [ 4.302413] Write protecting the kernel read-only data: 10240k
> [ 4.311209] Freeing unused kernel memory: 104k freed
> [ 4.324682] Freeing unused kernel memory: 1416k freed
> [ 4.357311] <30>udev[92]: starting version 167
> [ 4.385561] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.21 (Dec 23, 2010)
> [ 4.393943] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
> [ 4.400720] bnx2 0000:01:00.0: setting latency timer to 64
> [ 4.400830] usbcore: registered new interface driver uas
> [ 4.413597] Fusion MPT base driver 3.04.18
> [ 4.417682] Copyright (c) 1999-2008 LSI Corporation
> [ 4.420742] bnx2 0000:01:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 84:2b:2b:4b:cd:41
> [ 4.420788] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
> [ 4.420796] bnx2 0000:01:00.1: setting latency timer to 64
> [ 4.445146] Initializing USB Mass Storage driver...
> [ 4.448171] bnx2 0000:01:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 84:2b:2b:4b:cd:43
> [ 4.448208] bnx2 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
> [ 4.448214] bnx2 0000:02:00.0: setting latency timer to 64
> [ 4.453058] bnx2 0000:02:00.0: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 84:2b:2b:4b:cd:45
> [ 4.453094] bnx2 0000:02:00.1: PCI INT B -> GSI 42 (level, low) -> IRQ 42
> [ 4.453100] bnx2 0000:02:00.1: setting latency timer to 64
> [ 4.462821] usb 5-2: new full speed USB device using uhci_hcd and address 2
> [ 4.498575] scsi2 : usb-storage 2-3:1.0
> [ 4.503127] scsi3 : usb-storage 2-3:1.1
> [ 4.504324] bnx2 0000:02:00.1: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 84:2b:2b:4b:cd:47
> [ 4.520963] usbcore: registered new interface driver usb-storage
> [ 4.526959] USB Mass Storage support registered.
> [ 4.533637] Fusion MPT SAS Host driver 3.04.18
> [ 4.538114] mptsas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
> [ 4.545394] mptbase: ioc0: Initiating bringup
> [ 4.674721] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1
> [ 4.685727] generic-usb 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
> [ 4.703653] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2
> [ 4.714675] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
> [ 4.727775] usbcore: registered new interface driver usbhid
> [ 4.733730] usbhid: USB HID core driver
> [ 5.505439] scsi 2:0:0:0: Direct-Access iDRAC LCDRIVE 0323 PQ: 0 ANSI: 0 CCS
> [ 5.515636] sd 2:0:0:0: Attached scsi generic sg1 type 0
> [ 5.527584] scsi 3:0:0:0: CD-ROM iDRAC Virtual CD 0323 PQ: 0 ANSI: 0
> [ 5.541523] sd 2:0:0:0: [sda] Attached SCSI removable disk
> [ 5.543454] scsi 3:0:0:1: Direct-Access iDRAC Virtual Floppy 0323 PQ: 0 ANSI: 0 CCS
> [ 5.651629] sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
> [ 5.656684] sr 3:0:0:0: Attached scsi CD-ROM sr1
> [ 5.656892] sr 3:0:0:0: Attached scsi generic sg2 type 5
> [ 5.662469] sd 3:0:0:1: Attached scsi generic sg3 type 0
> [ 5.665770] sd 3:0:0:1: [sdb] Attached SCSI removable disk
> [ 6.102001] ioc0: LSISAS1068E B3: Capabilities={Initiator}
> [ 6.107534] mptsas 0000:03:00.0: setting latency timer to 64
> [ 26.297545] scsi4 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=33
> [ 26.345321] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5000c50023bee105
> [ 26.355954] scsi 4:0:0:0: Direct-Access SEAGATE ST3146356SS HS10 PQ: 0 ANSI: 5
> [ 26.366258] sd 4:0:0:0: Attached scsi generic sg4 type 0
> [ 26.372509] sd 4:0:0:0: [sdc] 286749480 512-byte logical blocks: (146 GB/136 GiB)
> [ 26.373117] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
> [ 26.375695] scsi 4:0:1:0: Direct-Access ATA SAMSUNG 470 Seri 8B1Q PQ: 0 ANSI: 5
> [ 26.377330] sd 4:0:1:0: Attached scsi generic sg5 type 0
> [ 26.378243] sd 4:0:1:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB)
> [ 26.378822] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x1221000002000000
> [ 26.381488] scsi 4:0:2:0: Direct-Access ATA SAMSUNG 470 Seri 8B1Q PQ: 0 ANSI: 5
> [ 26.383012] sd 4:0:2:0: Attached scsi generic sg6 type 0
> [ 26.384408] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x1221000003000000
> [ 26.384654] sd 4:0:1:0: [sdd] Write Protect is off
> [ 26.384658] sd 4:0:1:0: [sdd] Mode Sense: 73 00 00 08
> [ 26.384791] sd 4:0:2:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
> [ 26.385821] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 26.387300] scsi 4:0:3:0: Direct-Access ATA SAMSUNG 470 Seri 8B1Q PQ: 0 ANSI: 5
> [ 26.389053] sd 4:0:3:0: Attached scsi generic sg7 type 0
> [ 26.391043] sd 4:0:2:0: [sde] Write Protect is off
> [ 26.391046] sd 4:0:2:0: [sde] Mode Sense: 73 00 00 08
> [ 26.391141] sd 4:0:3:0: [sdf] 500118192 512-byte logical blocks: (256 GB/238 GiB)
> [ 26.392026] sd 4:0:2:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 26.395463] sdd: unknown partition table
> [ 26.396909] sd 4:0:3:0: [sdf] Write Protect is off
> [ 26.396913] sd 4:0:3:0: [sdf] Mode Sense: 73 00 00 08
> [ 26.398157] sd 4:0:3:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 26.399817] sde: unknown partition table
> [ 26.408938] sdf: unknown partition table
> [ 26.526702] sd 4:0:0:0: [sdc] Write Protect is off
> [ 26.531494] sd 4:0:0:0: [sdc] Mode Sense: b3 00 10 08
> [ 26.532980] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
> [ 26.543393] sd 4:0:1:0: [sdd] Attached SCSI disk
> [ 26.548084] sd 4:0:3:0: [sdf] Attached SCSI disk
> [ 26.552695] sd 4:0:2:0: [sde] Attached SCSI disk
> [ 26.558659] sdc: sdc1 sdc2 sdc3 sdc4
> [ 26.567054] sd 4:0:0:0: [sdc] Attached SCSI disk
> [ 26.783910] EXT3-fs (sdc2): recovery required on readonly filesystem
> [ 26.790249] EXT3-fs (sdc2): write access will be enabled during recovery
> [ 26.797806] EXT3-fs: barriers not enabled
> [ 27.080298] kjournald starting. Commit interval 5 seconds
> [ 27.080367] EXT3-fs (sdc2): recovery complete
> [ 27.090186] EXT3-fs (sdc2): mounted filesystem with ordered data mode
> [ 29.293563] <30>udev[366]: starting version 167
> [ 29.297354] Adding 5116696k swap on /dev/sdc3. Priority:-1 extents:1 across:5116696k
> [ 29.360540] bnx2 0000:01:00.0: irq 72 for MSI/MSI-X
> [ 29.360552] bnx2 0000:01:00.0: irq 73 for MSI/MSI-X
> [ 29.360561] bnx2 0000:01:00.0: irq 74 for MSI/MSI-X
> [ 29.360570] bnx2 0000:01:00.0: irq 75 for MSI/MSI-X
> [ 29.360580] bnx2 0000:01:00.0: irq 76 for MSI/MSI-X
> [ 29.360589] bnx2 0000:01:00.0: irq 77 for MSI/MSI-X
> [ 29.360598] bnx2 0000:01:00.0: irq 78 for MSI/MSI-X
> [ 29.360606] bnx2 0000:01:00.0: irq 79 for MSI/MSI-X
> [ 29.360615] bnx2 0000:01:00.0: irq 80 for MSI/MSI-X
> [ 29.426181] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> [ 29.429963] ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20110112/exfield-285)
> [ 29.429972] ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88064fa37b18), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> [ 29.429987] ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88064fa37a78), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
> [ 29.430003] ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20110112/power_meter-773)
> [ 29.444038] bnx2 0000:01:00.0: eth0: using MSIX
> [ 29.445786] EDAC MC: Ver: 2.1.0 Apr 11 2011
> [ 29.446236] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 29.455506] EDAC i7core: Driver loaded.
> [ 29.456884] lp: driver loaded but no devices found
> [ 29.718888] EXT3-fs (sdc2): using internal journal
> [ 30.085581] EXT3-fs: barriers not enabled
> [ 30.087847] kjournald starting. Commit interval 5 seconds
> [ 30.095073] EXT3-fs (sdc1): using internal journal
> [ 30.095079] EXT3-fs (sdc1): mounted filesystem with ordered data mode
> [ 30.240096] EXT3-fs: barriers not enabled
> [ 30.240605] kjournald starting. Commit interval 5 seconds
> [ 30.243989] EXT3-fs (sdc4): using internal journal
> [ 30.243995] EXT3-fs (sdc4): mounted filesystem with ordered data mode
> [ 32.696459] bnx2 0000:01:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex
> [ 32.698370] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 43.646072] eth0: no IPv6 routers present
>
>
> On Thu, 2011-11-17 at 14:48 +0800, Am?rico Wang wrote:
> > On Thu, Nov 17, 2011 at 12:52 AM, Tim Hartrick <tim at edgecast.com> wrote:
> > >
> > > Americo,
> > >
> > > Attached are dmesg and iomem for 2.6.32-21-server and 2.6.38-8-server on
> > > the same Dell R710. For 2.6.32-21-server the allocation of a 512M
> > > crashkernel area succeeded. For 2.6.38-8-server the allocation of a
> > > 512M crashkernel area failed.
> > >
> >
> > Thanks for digging this.
> >
> > .32,
> >
> > 00000000-00000fff : System RAM
> > 00001000-00005fff : reserved
> > 00006000-0009ffff : System RAM
> > 00100000-7f678fff : System RAM
> > 01000000-0155ec0f : Kernel code
> > 0155ec10-0186118f : Kernel data
> > 01936000-01a46ea3 : Kernel bss
> > 02000000-21ffffff : Crash kernel
> > 7f679000-7f68efff : reserved
> >
> > .38,
> >
> > 00000000-0000ffff : reserved
> > 00010000-0009ffff : System RAM
> > 000a0000-000bffff : PCI Bus 0000:00
> > 00100000-7f678fff : System RAM
> > 01000000-015e1d6c : Kernel code
> > 015e1d6d-01aca17f : Kernel data
> > 01bae000-01d03fff : Kernel bss
> > 7f679000-7f68efff : reserved
> >
> > although the end of kernel bss grows, but there should be still
> > enough memory for crash kernel, at least 02000000-21ffffff should
> > be available, don't know why kernel fails to find it... IIRC, the bootmem
> > allocator was written between .32 and .38.
> >
> > Anyway, could you add "bootmem_debug" to your .38 kernel to see
> > why kernel fails to reserve it?
> >
> > Thanks.
>
>
