On Fri, Mar 14, 2008 at 03:36:58AM -0700, Rajasekaran P wrote: > On Tue, Mar 11, 2008 at 11:48 AM, Geoff Levand <geoffrey.levand at am.sony.com> > wrote: > > Initially I made mistake by referring /proc/meminfo and thought the total > RAM was > 200M iB (actually it shows around 211MiB in /proc/meminfo > excluding swap space). But actual available memory is 128MiB only. Thats why > reserving 128MiB on 32MiB failed and kernel was not booting up. > > Now "crashkernel" argument works properly for 64MB at 64MB and kernel reserves > 64MB for crash dump capture kernel. In PPC64, crashkernel base address is hard coded i.e it is always loaded at 32MB, even though you have passed 64MB at 64MB. Did you get any warning message like crashkernel reserved at 32MB? > > This memory is reserved for "dump capture kernel" which will be loaded later > by using kexec. Please refer linux_src/Documentation/kdump/kdump.txt for > more information. > > I tried to load dump capture configured kernel and facing similar kind of > problem. After successful loading, Dump capture kernel is NOT BOOTING UP > upon kernel crash. Do you get any message from the dump capture kernel? How do you trigger the dump? > I used the following command to load: > > # kexec -t elf-ppc64 --append="video=ps3fb:mode:166 rhgb root=/dev/ps3da3 > single maxcpus=1 noirqdistrib" \ > --initrd=/boot/initrd-2.6.23-kdump.img \ > -p vmlinux.strip.kdump ^^ Is this kernel compiled with CRASH_DUMP enabled? If yes, it should build the kernel for 32MB. > * > Output:* > *setup_memory_ranges memory_range[0] start:585001, end:8000000 > get memory ranges:1 > setup_memory_ranges memory_range[0] start:585001, end:8000000 > Modified cmdline:video=ps3fb:mode:166 rhgb root=/dev/ps3da3 single maxcpus=1 > noirqdistrib elfcorehdr=71068K savemaxmem=64M > segment[0].mem:0x4000000 memsz:5599232 ^^ Says the vmlinux is loaded at 64MB > segment[1].mem:0x4557000 memsz:65536 > segment[2].mem:0x4567000 memsz:4096 > segment[3].mem:0x4568000 memsz:36864 > segment[4].mem:0x4571000 memsz:3469312 > segment[5].mem:0x7fff000 memsz:4096 > * > One more thing I confirmed was, this same dump capture kernel boots up > properly when I load it on normal mode (kexec -l and then kexec -e). I am > having no clue on this..