Hi Mohan, Thank you very much for your reply. > What kernel version you are trying? Also what level of kexec-tools you use? I've tried kernel 2.6.24 and 2.6.25 with the kexec-tools-testing 20080324, the both of them gave me the same result. > I hope you are aware that you need two different kernels for kdump, > first one is meant for normal use and another one is kdump kernel. Did > you compile the kdump kernel with CONFIG_CRASH_DUMP? Yes, I built 2 kernels the first one as the system kernel and the second one as the dump-capture kernel(with CONFIG_CRASH_DUMP). Another notice is when I pre-loaded the dump-capture kernel(kexec -p /boot/vmlinux...), I got Modified cmdline: elfcorehdr=41188K savemaxmem=0M ... segment[0].mem:0x2000000 memsz:8269624 segment[1].mem:0x27e3000 memsz:65536 segment[2].mem:0x27f3000 memsz:4096 segment[3].mem:0x27f4000 memsz:36864 segment[5].mem:0x9fbf000 memsz:266240 Why the savemaxmem=0M? since it should be some value else. Do you have any idea about this? Regards, Suchada -----Original Message----- From: Mohan Kumar M [mailto:mohan@xxxxxxxxxx] Sent: Tuesday, April 22, 2008 2:35 PM To: gib Cc: kexec at lists.infradead.org Subject: Re: Question about forcing kernel panic on PowerMac G5 by kexec command gib wrote: > Hello all, > > > > I'm working on PowerMac G5 complied with CONFIG_KEXEC = y. > > It's work fine with Kexec command option l ( kexec -l /boot/vmlinux. ) > but after the capture kernel pre-loading ( by kexec -p /boot/vmlinux. ), > Hi Suchada, What kernel version you are trying? Also what level of kexec-tools you use? I hope you are aware that you need two different kernels for kdump, first one is meant for normal use and another one is kdump kernel. Did you compile the kdump kernel with CONFIG_CRASH_DUMP? > when I forced kernel panic by "echo c > /proc/sysrq-trigger" the console > kept showing "Sending IPI to other CPU" and did not go to the next step. > > > > According to this list there was some problem about kdump in ppc970 based CPU which PowerMac's CPU are. There was a interrupt routing problem with specific ppc970 cpu type, but that problem is fixed now. Regards, Mohan.
