On Mon, Nov 12, 2007 at 10:17:21AM -0500, Neil Horman wrote: > On Mon, Nov 12, 2007 at 10:19:03AM +0530, Vivek Goyal wrote: > > On Wed, Nov 07, 2007 at 09:00:06AM -0500, Neil Horman wrote: > > > Hey all- > > > I've been getting reports of some x86_64 systems that, on kdump kernel > > > boot get stuck in calibrate_delay(), in both RHEL kernels and upstream kernels. > > > The current thinking is that the lapic timer interrupt is no longer getting > > > delivered, likely because we handle a crash condition on a cpu that isn't the > > > boot cpu. One known offender is this motherboard: > > > http://www.supermicro.com/Aplus/motherboard/Opteron8000/MCP55/H8QM8-2.cfm > > > My current thought is that the TIMER_LVT entry is masked on all but the boot cpu > > > on this system (which is strange, as I was under the impression that the timer > > > interrupt was supposed to be enabled on all CPU's nominally. > > > > I also thought that LAPIC timer interrupts are enabled on all cpus. > > > That doesn't appear to be the case. The configuration I've seen is that only > one lapic has timer interrupts enabled, and the interrupt handler for the timer > interrupt broadcasts the interrupt to all the other processors via IPI > > > > At any rate, I was > > > going to try to read/write the TIMER_LVT on the crashing processor before we > > > jump to purgatory, or in purgatory itself, to see if that fixes the problem, but > > > > I think calibrate_dealy() depends on external timer interrupt coming and > > not the local APIC timer interrupt. Generally it is 8254 timer chip. Now a > > days motherboards seems to be having HPET and I know somebody has reported > > problems with HPET where HPET interrupts are not coming in second kernel and > > system hangs in second kernel. I suspect that same might be the issue here. > > > Perhaps, do you have a pointer to any list discussions on the subject? I've not > seen any yet. > http://lkml.org/lkml/2007/8/20/155 Reading through the thread again looks like this guy faced issue with i386 machines and not x86_64 machines. Thanks Vivek
