Hello dear kernel-testers,
attached is a file of dmesg - output.
kernel 3.2 is booting too long ?
automatic recognition of cdrom fails (Matshita-combo-drive in notebook).
It takes 1 minute of kernel-booting for that.
cdrom-drive is recognized when automatic recognition switches off
after 1 minute.
but there is "error"-announcement of cdrom-drive.
I have no trouble with cdrom when using k3b, brasero, nautilus and so on.
what can I do for to shorten boot-time about 1 minute ?
For reply thanks.
Regards.
Val.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.14-1) (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Fri Apr 6 06:09:17 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=bcf39fa7-67a7-46ba-9942-e208dd405331 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
[ 0.000000] BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000008fec0000 (usable)
[ 0.000000] BIOS-e820: 000000008fec0000 - 000000008fed0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000008fed0000 - 000000008fee1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000008fee1000 - 00000000a0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Medion P8610 /P8610 , BIOS M1.08 12/30/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x160000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0A0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 140000000 mask FE0000000 write-back
[ 0.000000] 5 base 09FF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x8fec0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f77c0] f77c0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000008fec0000
[ 0.000000] 0000000000 - 008fe00000 page 2M
[ 0.000000] 008fe00000 - 008fec0000 page 4k
[ 0.000000] kernel direct mapping tables up to 8fec0000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000160000000
[ 0.000000] 0100000000 - 0160000000 page 2M
[ 0.000000] kernel direct mapping tables up to 160000000 @ 8feb9000-8fec0000
[ 0.000000] RAMDISK: 36c04000 - 375fa000
[ 0.000000] ACPI: RSDP 00000000000f7790 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000008fec4ee0 0009C (v01 MEDION MEDIONAG 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000008fecfc88 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 000000008fec9065 06BAF (v01 NVIDIA MCP79 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000008fee0fc0 00040
[ 0.000000] ACPI: SLIC 000000008fecfd7c 00176 (v01 MEDION MEDIONAG 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 000000008fecfef2 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000008fecff2e 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000008fecff66 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000008fecffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 000000008fec680b 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 000000008fec6765 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 000000008fec66bf 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 000000008fec6619 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 000000008fec6573 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 000000008fec64cd 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 000000008fec6427 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 000000008fec6381 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 000000008fec4f7c 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000160000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000160000000
[ 0.000000] NODE_DATA [000000015fffb000 - 000000015fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015ba00000-ffff88015effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00160000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0008fec0
[ 0.000000] 0: 0x00100000 -> 0x00160000
[ 0.000000] On node 0 totalpages: 982604
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 571128 pages, LIFO batch:31
[ 0.000000] Normal zone: 5376 pages used for memmap
[ 0.000000] Normal zone: 387840 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10dea301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000008fec0000 - 000000008fed0000
[ 0.000000] PM: Registered nosave memory: 000000008fed0000 - 000000008fee1000
[ 0.000000] PM: Registered nosave memory: 000000008fee1000 - 00000000a0000000
[ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
[ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015fc00000 s82304 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 962887
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=bcf39fa7-67a7-46ba-9942-e208dd405331 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3790120k/5767168k available (3383k kernel code, 1836752k absent, 140296k reserved, 3349k data, 568k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.024 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.04 BogoMIPS (lpj=8000096)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004063] Security Framework initialized
[ 0.004070] AppArmor: AppArmor disabled by boot time parameter
[ 0.004506] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009378] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010599] Mount-cache hash table entries: 256
[ 0.010779] Initializing cgroup subsys cpuacct
[ 0.010786] Initializing cgroup subsys memory
[ 0.010802] Initializing cgroup subsys devices
[ 0.010806] Initializing cgroup subsys freezer
[ 0.010809] Initializing cgroup subsys net_cls
[ 0.010811] Initializing cgroup subsys blkio
[ 0.010821] Initializing cgroup subsys perf_event
[ 0.010862] CPU: Physical Processor ID: 0
[ 0.010864] CPU: Processor Core ID: 0
[ 0.010867] mce: CPU supports 6 MCE banks
[ 0.010876] CPU0: Thermal monitoring handled by SMI
[ 0.010882] using mwait in idle threads.
[ 0.011415] ACPI: Core revision 20110623
[ 0.024535] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064230] CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a
[ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1 Ok.
[ 0.068003] smpboot cpu 1: start_ip = 97000
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.156045] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156089] Brought up 2 CPUs
[ 0.156092] Total of 2 processors activated (7999.99 BogoMIPS).
[ 0.157738] devtmpfs: initialized
[ 0.161729] PM: Registering ACPI NVS region at 8fed0000 (69632 bytes)
[ 0.161729] print_constraints: dummy:
[ 0.161729] NET: Registered protocol family 16
[ 0.161729] ACPI: bus type pci registered
[ 0.161729] PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
[ 0.161729] PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
[ 0.161729] PCI: Using configuration type 1 for base access
[ 0.164066] bio: create slab <bio-0> at 0
[ 0.164066] ACPI: Added _OSI(Module Device)
[ 0.164067] ACPI: Added _OSI(Processor Device)
[ 0.164069] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.164072] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165569] ACPI: EC: Look up EC in DSDT
[ 0.170147] ACPI: SSDT 000000008fec748a 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.170496] ACPI: Dynamic OEM Table Load:
[ 0.170499] ACPI: SSDT (null) 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.170848] ACPI: SSDT 000000008fec6a6a 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.171247] ACPI: Dynamic OEM Table Load:
[ 0.171250] ACPI: SSDT (null) 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.180478] ACPI: SSDT 000000008fec76a9 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.180829] ACPI: Dynamic OEM Table Load:
[ 0.180832] ACPI: SSDT (null) 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.181099] ACPI: SSDT 000000008fec70e7 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.181427] ACPI: Dynamic OEM Table Load:
[ 0.181430] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.192414] ACPI: Interpreter enabled
[ 0.192420] ACPI: (supports S0 S3 S4 S5)
[ 0.192443] ACPI: Using IOAPIC for interrupt routing
[ 0.220860] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.221146] ACPI: No dock devices found.
[ 0.221148] HEST: Table not found.
[ 0.221152] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.221222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.221374] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.221377] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.221380] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.221383] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.221386] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.221388] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.221391] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.221394] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.221397] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.221400] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.221403] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.221405] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.221408] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.221411] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.221414] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.221417] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.221419] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.221422] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff]
[ 0.221430] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce5ff])
[ 0.221452] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
[ 0.221560] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
[ 0.221713] pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
[ 0.221723] pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff]
[ 0.221774] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
[ 0.221862] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
[ 0.221877] pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf]
[ 0.221901] pci 0000:00:03.2: reg 20: [io 0x3040-0x307f]
[ 0.221909] pci 0000:00:03.2: reg 24: [io 0x2000-0x203f]
[ 0.221946] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.221953] pci 0000:00:03.2: PME# disabled
[ 0.221974] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
[ 0.222128] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
[ 0.222148] pci 0000:00:03.5: reg 10: [mem 0xf0700000-0xf077ffff]
[ 0.222277] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
[ 0.222290] pci 0000:00:04.0: reg 10: [mem 0xf0786000-0xf0786fff]
[ 0.222343] pci 0000:00:04.0: supports D1 D2
[ 0.222345] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222349] pci 0000:00:04.0: PME# disabled
[ 0.222366] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
[ 0.222381] pci 0000:00:04.1: reg 10: [mem 0xf0789000-0xf07890ff]
[ 0.222443] pci 0000:00:04.1: supports D1 D2
[ 0.222446] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222450] pci 0000:00:04.1: PME# disabled
[ 0.222475] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
[ 0.222488] pci 0000:00:06.0: reg 10: [mem 0xf0787000-0xf0787fff]
[ 0.222541] pci 0000:00:06.0: supports D1 D2
[ 0.222543] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222547] pci 0000:00:06.0: PME# disabled
[ 0.222564] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
[ 0.222579] pci 0000:00:06.1: reg 10: [mem 0xf0789400-0xf07894ff]
[ 0.222641] pci 0000:00:06.1: supports D1 D2
[ 0.222643] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222647] pci 0000:00:06.1: PME# disabled
[ 0.222673] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
[ 0.222686] pci 0000:00:08.0: reg 10: [mem 0xf0780000-0xf0783fff]
[ 0.222739] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.222743] pci 0000:00:08.0: PME# disabled
[ 0.222757] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
[ 0.222809] pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
[ 0.222822] pci 0000:00:0a.0: reg 10: [mem 0xf0788000-0xf0788fff]
[ 0.222829] pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7]
[ 0.222836] pci 0000:00:0a.0: reg 18: [mem 0xf0789c00-0xf0789cff]
[ 0.222843] pci 0000:00:0a.0: reg 1c: [mem 0xf0789800-0xf078980f]
[ 0.222880] pci 0000:00:0a.0: supports D1 D2
[ 0.222882] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222887] pci 0000:00:0a.0: PME# disabled
[ 0.222905] pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
[ 0.222918] pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef]
[ 0.222925] pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df]
[ 0.222932] pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7]
[ 0.222939] pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db]
[ 0.222946] pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf]
[ 0.222953] pci 0000:00:0b.0: reg 24: [mem 0xf0784000-0xf0785fff]
[ 0.223038] pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
[ 0.223267] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.223276] pci 0000:00:0c.0: PME# disabled
[ 0.223326] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
[ 0.223372] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.223375] pci 0000:00:10.0: PME# disabled
[ 0.223434] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
[ 0.223663] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.223671] pci 0000:00:15.0: PME# disabled
[ 0.223753] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
[ 0.223982] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.223990] pci 0000:00:16.0: PME# disabled
[ 0.224086] pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
[ 0.224316] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.224324] pci 0000:00:17.0: PME# disabled
[ 0.224406] pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
[ 0.224635] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.224643] pci 0000:00:18.0: PME# disabled
[ 0.224742] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.224750] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.224753] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.224756] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.224760] pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.224763] pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.224766] pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.224769] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.224772] pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.224775] pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.224778] pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.224781] pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.224785] pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.224788] pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.224791] pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.224794] pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.224797] pci 0000:00:09.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.224800] pci 0000:00:09.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
[ 0.224954] pci 0000:02:00.0: [10de:0648] type 0 class 0x000300
[ 0.224966] pci 0000:02:00.0: reg 10: [mem 0xae000000-0xaeffffff]
[ 0.224979] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.224991] pci 0000:02:00.0: reg 1c: [mem 0xac000000-0xadffffff 64bit]
[ 0.225000] pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
[ 0.225009] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.232032] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.232047] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
[ 0.232056] pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
[ 0.232071] pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.232114] pci 0000:03:00.0: [10de:086e] type 0 class 0x000300
[ 0.232127] pci 0000:03:00.0: reg 10: [mem 0xaa000000-0xaaffffff]
[ 0.232140] pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.232152] pci 0000:03:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.232161] pci 0000:03:00.0: reg 24: [io 0x5000-0x507f]
[ 0.232170] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.232236] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[ 0.232241] pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
[ 0.232244] pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
[ 0.232249] pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
[ 0.232390] pci 0000:00:15.0: PCI bridge to [bus 04-05]
[ 0.232404] pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
[ 0.232413] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
[ 0.232428] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.232587] pci 0000:06:00.0: [168c:002a] type 0 class 0x000280
[ 0.232608] pci 0000:06:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
[ 0.232706] pci 0000:06:00.0: supports D1
[ 0.232709] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.232714] pci 0000:06:00.0: PME# disabled
[ 0.232735] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.232749] pci 0000:00:16.0: PCI bridge to [bus 06-06]
[ 0.232770] pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.232924] pci 0000:00:17.0: PCI bridge to [bus 07-07]
[ 0.233097] pci 0000:00:18.0: PCI bridge to [bus 08-08]
[ 0.233199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.233425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.233448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.233657] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.233662] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.233664] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.276415] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.276532] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.276651] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.276766] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.276883] ACPI: PCI Interrupt Link [Z002] (IRQs 18 19 20 21 22 23) *11
[ 0.276998] ACPI: PCI Interrupt Link [Z003] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.277113] ACPI: PCI Interrupt Link [Z004] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.277227] ACPI: PCI Interrupt Link [Z005] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.277342] ACPI: PCI Interrupt Link [Z006] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.277456] ACPI: PCI Interrupt Link [Z007] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.277570] ACPI: PCI Interrupt Link [Z008] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.277684] ACPI: PCI Interrupt Link [Z009] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.277798] ACPI: PCI Interrupt Link [Z00A] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.277913] ACPI: PCI Interrupt Link [Z00B] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.278027] ACPI: PCI Interrupt Link [Z00C] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.278141] ACPI: PCI Interrupt Link [Z00D] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.278256] ACPI: PCI Interrupt Link [Z00E] (IRQs 18 19 20 21 22 23) *10
[ 0.278372] ACPI: PCI Interrupt Link [Z00F] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.278486] ACPI: PCI Interrupt Link [Z00G] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.278601] ACPI: PCI Interrupt Link [Z00H] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.278715] ACPI: PCI Interrupt Link [Z00I] (IRQs 18 19 20 21 22 23) *11
[ 0.278829] ACPI: PCI Interrupt Link [Z00J] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.278943] ACPI: PCI Interrupt Link [Z00K] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.279058] ACPI: PCI Interrupt Link [Z00L] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.279173] ACPI: PCI Interrupt Link [Z00M] (IRQs 18 19 20 21 22 23) *10
[ 0.279287] ACPI: PCI Interrupt Link [Z00N] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.279402] ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.279521] ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.279636] ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
[ 0.279750] ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.279868] ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.279986] ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.280115] ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
[ 0.280229] ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *11
[ 0.280343] ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *7
[ 0.280462] ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
[ 0.280576] ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *5
[ 0.280687] ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *10
[ 0.280801] ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.280915] ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
[ 0.281029] ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
[ 0.281143] ACPI: PCI Interrupt Link [Z000] (IRQs 18 19 20 21 22 23) *5
[ 0.281262] ACPI: PCI Interrupt Link [Z001] (IRQs 18 19 20 21 22 23) *10
[ 0.281381] ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *11
[ 0.281502] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.281502] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.281502] vgaarb: loaded
[ 0.281502] vgaarb: bridge control possible 0000:03:00.0
[ 0.281502] vgaarb: bridge control possible 0000:02:00.0
[ 0.281502] PCI: Using ACPI for IRQ routing
[ 0.281502] PCI: pci_cache_line_size set to 64 bytes
[ 0.281502] reserve RAM buffer: 000000000009cc00 - 000000000009ffff
[ 0.281502] reserve RAM buffer: 000000008fec0000 - 000000008fffffff
[ 0.281502] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.281502] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.281502] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.284171] Switching to clocksource hpet
[ 0.286534] pnp: PnP ACPI init
[ 0.286554] ACPI: bus type pnp registered
[ 0.286667] pnp 00:00: [mem 0xffc00000-0xffffffff]
[ 0.286670] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[ 0.286673] pnp 00:00: [mem 0xfee00000-0xfeefffff]
[ 0.286675] pnp 00:00: [mem 0xfed00000-0xfed00fff]
[ 0.286754] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.286758] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.286762] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.286765] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.286770] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.286836] pnp 00:01: [bus 00-ff]
[ 0.286841] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.286844] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.286846] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.286849] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.286851] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.286854] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.286856] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.286859] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.286861] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.286864] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.286866] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.286869] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.286872] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.286874] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.286877] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.286879] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.286882] pnp 00:01: [mem 0x000f0000-0x000fffff window]
[ 0.286884] pnp 00:01: [mem 0xfed40000-0xfed44fff window]
[ 0.286887] pnp 00:01: [mem 0xa0000000-0xfebfffff window]
[ 0.286977] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.287180] pnp 00:02: [irq 0 disabled]
[ 0.287194] pnp 00:02: [irq 8]
[ 0.287196] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.287241] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.287293] pnp 00:03: [mem 0xf0700000-0xf0707fff]
[ 0.287304] pnp 00:03: disabling [mem 0xf0700000-0xf0707fff] because it overlaps 0000:00:03.5 BAR 0 [mem 0xf0700000-0xf077ffff]
[ 0.287369] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287624] pnp 00:04: [io 0x1000-0x107f]
[ 0.287627] pnp 00:04: [io 0x1080-0x10ff]
[ 0.287629] pnp 00:04: [io 0x1400-0x147f]
[ 0.287632] pnp 00:04: [io 0x1480-0x14ff]
[ 0.287634] pnp 00:04: [io 0x1800-0x187f]
[ 0.287636] pnp 00:04: [io 0x1880-0x18ff]
[ 0.287638] pnp 00:04: [io 0x3040-0x307f]
[ 0.287642] pnp 00:04: [io 0x2000-0x203f]
[ 0.287714] system 00:04: [io 0x1000-0x107f] has been reserved
[ 0.287718] system 00:04: [io 0x1080-0x10ff] has been reserved
[ 0.287721] system 00:04: [io 0x1400-0x147f] has been reserved
[ 0.287724] system 00:04: [io 0x1480-0x14ff] has been reserved
[ 0.287728] system 00:04: [io 0x1800-0x187f] has been reserved
[ 0.287731] system 00:04: [io 0x1880-0x18ff] has been reserved
[ 0.287734] system 00:04: [io 0x3040-0x307f] has been reserved
[ 0.287737] system 00:04: [io 0x2000-0x203f] has been reserved
[ 0.287741] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287761] pnp 00:05: [io 0x0060]
[ 0.287764] pnp 00:05: [io 0x0064]
[ 0.287770] pnp 00:05: [irq 1]
[ 0.287816] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.287836] pnp 00:06: [irq 12]
[ 0.287883] pnp 00:06: Plug and Play ACPI device, IDs SYN0c12 SYN0c00 PNP0f13 (active)
[ 0.287904] pnp 00:07: [io 0x0010-0x001f]
[ 0.287907] pnp 00:07: [io 0x0022-0x003f]
[ 0.287909] pnp 00:07: [io 0x0044-0x005f]
[ 0.287911] pnp 00:07: [io 0x0062-0x0063]
[ 0.287913] pnp 00:07: [io 0x0065-0x006f]
[ 0.287915] pnp 00:07: [io 0x0072-0x0073]
[ 0.287917] pnp 00:07: [io 0x0074-0x007f]
[ 0.287920] pnp 00:07: [io 0x0091-0x0093]
[ 0.287922] pnp 00:07: [io 0x0097-0x009f]
[ 0.287924] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.287926] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.287928] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.287930] pnp 00:07: [io 0x0080]
[ 0.287932] pnp 00:07: [io 0x0a00-0x0a0f]
[ 0.287935] pnp 00:07: [io 0x0295-0x0296]
[ 0.288023] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.288027] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.288030] system 00:07: [io 0x0295-0x0296] has been reserved
[ 0.288034] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288051] pnp 00:08: [io 0x0000-0x0008]
[ 0.288053] pnp 00:08: [io 0x000a-0x000f]
[ 0.288056] pnp 00:08: [io 0x0081-0x0083]
[ 0.288058] pnp 00:08: [io 0x0087]
[ 0.288060] pnp 00:08: [io 0x0089-0x008b]
[ 0.288062] pnp 00:08: [io 0x008f]
[ 0.288064] pnp 00:08: [io 0x00c0-0x00d1]
[ 0.288066] pnp 00:08: [io 0x00d4-0x00df]
[ 0.288069] pnp 00:08: [dma 4]
[ 0.288116] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.288129] pnp 00:09: [io 0x0061]
[ 0.288178] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.288212] pnp 00:0a: [io 0x0070-0x0071]
[ 0.288259] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.288271] pnp 00:0b: [io 0x00f0-0x00f1]
[ 0.288277] pnp 00:0b: [irq 13]
[ 0.288326] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.289201] pnp: PnP ACPI: found 12 devices
[ 0.289203] ACPI: ACPI bus type pnp unregistered
[ 0.296783] PCI: max bus depth: 1 pci_try_num: 2
[ 0.296892] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.296904] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 0.296907] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.296913] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
[ 0.296924] pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
[ 0.296933] pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.296948] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 0.296951] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[ 0.296954] pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
[ 0.296959] pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
[ 0.296963] pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
[ 0.296968] pci 0000:00:15.0: PCI bridge to [bus 04-05]
[ 0.296973] pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
[ 0.296984] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
[ 0.296992] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.297007] pci 0000:00:16.0: PCI bridge to [bus 06-06]
[ 0.297017] pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.297037] pci 0000:00:17.0: PCI bridge to [bus 07-07]
[ 0.297065] pci 0000:00:18.0: PCI bridge to [bus 08-08]
[ 0.297099] pci 0000:00:09.0: setting latency timer to 64
[ 0.297306] ACPI: PCI Interrupt Link [Z002] enabled at IRQ 23
[ 0.297318] pci 0000:00:0c.0: PCI INT A -> Link[Z002] -> GSI 23 (level, low) -> IRQ 23
[ 0.297328] pci 0000:00:0c.0: setting latency timer to 64
[ 0.297336] pci 0000:00:10.0: setting latency timer to 64
[ 0.297523] ACPI: PCI Interrupt Link [Z00E] enabled at IRQ 22
[ 0.297532] pci 0000:00:15.0: PCI INT A -> Link[Z00E] -> GSI 22 (level, low) -> IRQ 22
[ 0.297541] pci 0000:00:15.0: setting latency timer to 64
[ 0.297729] ACPI: PCI Interrupt Link [Z00I] enabled at IRQ 21
[ 0.297738] pci 0000:00:16.0: PCI INT A -> Link[Z00I] -> GSI 21 (level, low) -> IRQ 21
[ 0.297748] pci 0000:00:16.0: setting latency timer to 64
[ 0.297936] ACPI: PCI Interrupt Link [Z00M] enabled at IRQ 20
[ 0.297944] pci 0000:00:17.0: PCI INT A -> Link[Z00M] -> GSI 20 (level, low) -> IRQ 20
[ 0.297953] pci 0000:00:17.0: setting latency timer to 64
[ 0.298141] ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 19
[ 0.298149] pci 0000:00:18.0: PCI INT A -> Link[Z00Q] -> GSI 19 (level, low) -> IRQ 19
[ 0.298158] pci 0000:00:18.0: setting latency timer to 64
[ 0.298164] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.298167] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.298170] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.298172] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.298175] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.298177] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.298180] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.298183] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.298185] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.298188] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.298191] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.298193] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.298196] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.298198] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.298201] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.298204] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff]
[ 0.298207] pci_bus 0000:00: resource 20 [mem 0xa0000000-0xfebfffff]
[ 0.298210] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.298212] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.298215] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.298218] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.298220] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.298223] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.298225] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.298228] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.298231] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.298233] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.298236] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.298238] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.298241] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.298244] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[ 0.298246] pci_bus 0000:01: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.298249] pci_bus 0000:01: resource 19 [mem 0xfed40000-0xfed44fff]
[ 0.298252] pci_bus 0000:01: resource 20 [mem 0xa0000000-0xfebfffff]
[ 0.298254] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.298257] pci_bus 0000:02: resource 1 [mem 0xac000000-0xaeffffff]
[ 0.298260] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.298263] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.298265] pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaaffffff]
[ 0.298268] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
[ 0.298271] pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
[ 0.298274] pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
[ 0.298276] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.298279] pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.298356] NET: Registered protocol family 2
[ 0.298548] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.300086] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.304956] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305551] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.305554] TCP reno registered
[ 0.305567] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.305615] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.305815] NET: Registered protocol family 1
[ 0.306130] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[ 0.306150] pci 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
[ 0.306189] pci 0000:00:04.0: PCI INT A disabled
[ 0.306381] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 0.306385] pci 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23
[ 0.306406] pci 0000:00:04.1: PCI INT B disabled
[ 0.306595] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 22
[ 0.306599] pci 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 22 (level, low) -> IRQ 22
[ 0.306618] pci 0000:00:06.0: PCI INT A disabled
[ 0.306808] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 21
[ 0.306812] pci 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 21 (level, low) -> IRQ 21
[ 0.306832] pci 0000:00:06.1: PCI INT B disabled
[ 0.307063] pci 0000:03:00.0: Boot video device
[ 0.307070] PCI: CLS 64 bytes, default 64
[ 0.307137] Unpacking initramfs...
[ 0.572996] Freeing initrd memory: 10200k freed
[ 0.578509] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.578517] Placing 64MB software IO TLB between ffff88008beb9000 - ffff88008feb9000
[ 0.578519] software IO TLB at phys 0x8beb9000 - 0x8feb9000
[ 0.578546] Simple Boot Flag at 0x36 set to 0x1
[ 0.579124] audit: initializing netlink socket (disabled)
[ 0.579142] type=2000 audit(1334838999.572:1): initialized
[ 0.605216] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.628752] VFS: Disk quotas dquot_6.5.2
[ 0.628795] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.628886] msgmni has been set to 7422
[ 0.629077] alg: No test for stdrng (krng)
[ 0.629115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.629120] io scheduler noop registered
[ 0.629122] io scheduler deadline registered
[ 0.629139] io scheduler cfq registered (default)
[ 0.629894] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.629926] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.629929] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.630272] acpiphp: Slot [1] registered
[ 0.630328] acpiphp: Slot [1-1] registered
[ 0.630371] acpiphp: Slot [1-2] registered
[ 0.630587] intel_idle: MWAIT substates: 0x22220
[ 0.630590] intel_idle: does not run on family 6 model 23
[ 0.630628] ERST: Table is not found!
[ 0.630629] GHES: HEST is not enabled!
[ 0.630713] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.676492] Linux agpgart interface v0.103
[ 0.676652] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.678635] i8042: Detected active multiplexing controller, rev 1.1
[ 0.679766] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.679774] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.679811] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.679842] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.679872] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.680039] mousedev: PS/2 mouse device common for all mice
[ 0.680305] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 0.680357] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.680367] cpuidle: using governor ladder
[ 0.680369] cpuidle: using governor menu
[ 0.680590] TCP cubic registered
[ 0.680642] NET: Registered protocol family 10
[ 0.681172] Mobile IPv6
[ 0.681176] NET: Registered protocol family 17
[ 0.681180] Registering the dns_resolver key type
[ 0.681337] PM: Hibernation image not present or could not be loaded.
[ 0.681349] registered taskstats version 1
[ 0.693703] rtc_cmos 00:0a: setting system clock to 2012-04-19 12:36:40 UTC (1334839000)
[ 0.693764] Initializing network drop monitor service
[ 0.695270] Freeing unused kernel memory: 568k freed
[ 0.695441] Write protecting the kernel read-only data: 6144k
[ 0.698570] Freeing unused kernel memory: 696k freed
[ 0.701708] Freeing unused kernel memory: 668k freed
[ 0.715267] udevd[49]: starting version 175
[ 0.715887] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.747770] usbcore: registered new interface driver usbfs
[ 0.747801] usbcore: registered new interface driver hub
[ 0.751081] SCSI subsystem initialized
[ 0.751781] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.763262] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 0.763272] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 0.763280] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.777777] usbcore: registered new device driver usb
[ 0.778313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.798686] libata version 3.00 loaded.
[ 0.811308] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.825358] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:22:20:04:74:48
[ 0.825364] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 0.825926] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23
[ 0.825962] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.825966] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.826002] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.826036] ehci_hcd 0000:00:04.1: debug port 1
[ 0.826046] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.826070] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf0789000
[ 0.836066] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.836137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.836141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.836144] usb usb1: Product: EHCI Host Controller
[ 0.836146] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 0.836148] usb usb1: SerialNumber: 0000:00:04.1
[ 0.836297] hub 1-0:1.0: USB hub found
[ 0.836303] hub 1-0:1.0: 6 ports detected
[ 0.836416] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 21 (level, low) -> IRQ 21
[ 0.836452] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.836455] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.836466] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.836489] ehci_hcd 0000:00:06.1: debug port 1
[ 0.836498] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[ 0.836524] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0789400
[ 0.848025] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 0.848075] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.848078] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.848081] usb usb2: Product: EHCI Host Controller
[ 0.848083] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 0.848085] usb usb2: SerialNumber: 0000:00:06.1
[ 0.848226] hub 2-0:1.0: USB hub found
[ 0.848231] hub 2-0:1.0: 6 ports detected
[ 0.848506] ahci 0000:00:0b.0: version 3.0
[ 0.848730] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 19
[ 0.848736] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
[ 0.848801] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.848809] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 0.848863] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.848867] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum sxs boh
[ 0.848872] ahci 0000:00:0b.0: setting latency timer to 64
[ 0.849715] scsi0 : ahci
[ 0.849844] scsi1 : ahci
[ 0.849929] scsi2 : ahci
[ 0.852495] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.852498] ACPI: Thermal Zone [TZ0] (35 C)
[ 0.855240] scsi3 : ahci
[ 0.855434] ata1: SATA max UDMA/133 abar m8192@0xf0784000 port 0xf0784100 irq 40
[ 0.855438] ata2: SATA max UDMA/133 abar m8192@0xf0784000 port 0xf0784180 irq 40
[ 0.855442] ata3: SATA max UDMA/133 abar m8192@0xf0784000 port 0xf0784200 irq 40
[ 0.855445] ata4: SATA max UDMA/133 abar m8192@0xf0784000 port 0xf0784280 irq 40
[ 0.855516] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
[ 0.855553] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.855557] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.855577] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.855616] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf0786000
[ 0.910023] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.910027] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.910030] usb usb3: Product: OHCI Host Controller
[ 0.910032] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 0.910035] usb usb3: SerialNumber: 0000:00:04.0
[ 0.910194] hub 3-0:1.0: USB hub found
[ 0.910201] hub 3-0:1.0: 6 ports detected
[ 0.910310] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 22 (level, low) -> IRQ 22
[ 0.910339] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.910343] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.910355] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.910389] ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0787000
[ 0.966016] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.966020] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.966022] usb usb4: Product: OHCI Host Controller
[ 0.966025] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 0.966027] usb usb4: SerialNumber: 0000:00:06.0
[ 0.966167] hub 4-0:1.0: USB hub found
[ 0.966174] hub 4-0:1.0: 6 ports detected
[ 1.172024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.172041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.173803] ata2.00: ATAPI: MATSHITABD-CMB UJ-120, 1.00, max UDMA/33
[ 1.176019] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.176032] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.176313] ata2.00: configured for UDMA/33
[ 1.217046] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.217049] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.219133] ata1.00: configured for UDMA/133
[ 1.219277] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[ 1.396015] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 1.576018] Refined TSC clocksource calibration: 1999.951 MHz.
[ 1.576023] Switching to clocksource tsc
[ 1.610028] usb 3-1: New USB device found, idVendor=04d9, idProduct=0499
[ 1.610031] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.780015] usb 2-3: new high-speed USB device number 3 using ehci_hcd
[ 1.913799] usb 2-3: New USB device found, idVendor=eb1a, idProduct=5060
[ 1.913802] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.024016] usb 2-4: new high-speed USB device number 4 using ehci_hcd
[ 2.410171] usb 2-4: New USB device found, idVendor=0bda, idProduct=0158
[ 2.410175] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.410178] usb 2-4: Product: USB2.0-CRW
[ 2.410180] usb 2-4: Manufacturer: Generic
[ 2.410182] usb 2-4: SerialNumber: 20071114173400000
[ 2.416651] usbcore: registered new interface driver uas
[ 2.716010] usb 4-2: new low-speed USB device number 2 using ohci_hcd
[ 2.929029] usb 4-2: New USB device found, idVendor=0603, idProduct=00f1
[ 2.929032] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.929035] usb 4-2: Product: USB Keyboard
[ 2.929037] usb 4-2: Manufacturer: NOVATEK
[ 21.856031] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 21.856088] scsi 1:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
[ 21.856099] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 21.856100] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 21.856202] ata2.00: status: { DRDY }
[ 21.856254] ata2: hard resetting link
[ 22.176013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 22.180906] ata2.00: configured for UDMA/33
[ 22.181318] ata2: EH complete
[ 22.181321] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[ 22.182219] scsi 1:0:0:0: CD-ROM MATSHITA BD-CMB UJ-120 1.00 PQ: 0 ANSI: 5
[ 22.187018] Initializing USB Mass Storage driver...
[ 22.187204] usbcore: registered new interface driver usb-storage
[ 22.187206] USB Mass Storage support registered.
[ 22.191275] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 22.191333] sd 0:0:0:0: [sda] Write Protect is off
[ 22.191336] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.191459] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.194289] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.0/input/input1
[ 22.194381] generic-usb 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:04.0-1/input0
[ 22.194962] scsi4 : usb-storage 2-4:1.0
[ 22.195054] usbcore: registered new interface driver ums-realtek
[ 22.200297] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:06.0/usb4/4-2/4-2:1.0/input/input2
[ 22.200351] generic-usb 0003:0603:00F1.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:06.0-2/input0
[ 22.215120] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:06.0/usb4/4-2/4-2:1.1/input/input3
[ 22.215264] generic-usb 0003:0603:00F1.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [NOVATEK USB Keyboard] on usb-0000:00:06.0-2/input1
[ 22.215286] usbcore: registered new interface driver usbhid
[ 22.215289] usbhid: USB HID core driver
[ 22.607591] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 22.608123] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.194327] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 23.198924] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 52.832037] ata2: limiting SATA link speed to 1.5 Gbps
[ 52.832043] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 52.832101] sr 1:0:0:0: CDB: Mode Sense(10): 5a 00 2a 00 00 00 00 00 80 00
[ 52.832114] ata2.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
[ 52.832115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 52.832217] ata2.00: status: { DRDY }
[ 52.832269] ata2: hard resetting link
[ 53.152012] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 53.156906] ata2.00: configured for UDMA/33
[ 53.157313] ata2: EH complete
[ 53.157318] sr0: scsi-1 drive
[ 53.157321] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 53.157485] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 60.832024] ata2.00: limiting speed to UDMA/25:PIO4
[ 60.832029] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 60.832086] sr 1:0:0:0: CDB: Xdread, Read track info: 52 01 00 00 00 01 00 00 20 00
[ 60.832098] ata2.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
[ 60.832100] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 60.832202] ata2.00: status: { DRDY }
[ 60.832254] ata2: hard resetting link
[ 61.152013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 61.156822] ata2.00: configured for UDMA/25
[ 61.157225] ata2: EH complete
[ 61.157228] sr0: CDROM (ioctl) error, command: Xdread, Read track info 52 01 00 00 00 01 00 00 20 00
[ 61.157796] sr: Sense Key : Aborted Command [current] [descriptor]
[ 61.157800] sr: Add. Sense: No additional sense information
[ 61.291786] device-mapper: uevent: version 1.0.3
[ 61.291973] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx
[ 61.347178] PM: Starting manual resume from disk
[ 61.347182] PM: Hibernation image partition 8:5 present
[ 61.347184] PM: Looking for hibernation image.
[ 61.347330] PM: Image not found (code -22)
[ 61.347333] PM: Hibernation image not present or could not be loaded.
[ 61.365809] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 61.366147] SGI XFS Quota Management subsystem
[ 61.367472] XFS (sda3): Mounting Filesystem
[ 61.874809] XFS (sda3): Ending clean mount
[ 63.756215] udevd[337]: starting version 175
[ 65.366706] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 65.366714] ACPI: Power Button [PWRB]
[ 65.366802] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:26/PNP0C0D:00/input/input5
[ 65.367080] ACPI: Lid Switch [LID]
[ 65.367173] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 65.367178] ACPI: Sleep Button [SBTN]
[ 65.367236] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 65.367240] ACPI: Power Button [PWRF]
[ 65.652882] Monitor-Mwait will be used to enter C-1 state
[ 65.652981] Monitor-Mwait will be used to enter C-2 state
[ 65.653008] Monitor-Mwait will be used to enter C-3 state
[ 65.653042] Marking TSC unstable due to TSC halts in idle
[ 65.653452] ACPI: acpi_idle registered with cpuidle
[ 65.654267] Switching to clocksource hpet
[ 65.659131] ACPI: Battery Slot [BAT0] (battery present)
[ 65.663181] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 65.665373] acpi device:0a: registered as cooling_device2
[ 65.665538] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:00/input/input8
[ 65.665546] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 65.665570] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110623/video-1147)
[ 65.667707] acpi device:10: registered as cooling_device3
[ 65.667850] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0f/LNXVIDEO:01/input/input9
[ 65.667855] ACPI: Video Device [Z00U] (multi-head: no rom: yes post: no)
[ 65.724335] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 66.070392] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 66.226626] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 66.226657] i2c i2c-1: nForce2 SMBus adapter at 0x2000
[ 66.332081] ACPI: AC Adapter [AC] (on-line)
[ 66.559956] cfg80211: Calling CRDA to update world regulatory domain
[ 66.659297] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04711/0x20040a/0x0
[ 66.692403] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[ 66.825968] ath9k 0000:06:00.0: PCI INT A -> Link[Z00I] -> GSI 21 (level, low) -> IRQ 21
[ 66.825981] ath9k 0000:06:00.0: setting latency timer to 64
[ 67.256566] ath: EEPROM regdomain: 0x60
[ 67.256569] ath: EEPROM indicates we should expect a direct regpair map
[ 67.256573] ath: Country alpha2 being used: 00
[ 67.256575] ath: Regpair used: 0x60
[ 67.398301] nvidia: module license 'NVIDIA' taints kernel.
[ 67.398308] nvidia: module license 'NVIDIA' taints kernel.
[ 67.398313] Disabling lock debugging due to kernel taint
[ 67.670043] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18
[ 67.670051] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18
[ 67.670077] nvidia 0000:02:00.0: enabling device (0104 -> 0107)
[ 67.670084] nvidia 0000:02:00.0: PCI INT A -> Link[Z002] -> GSI 23 (level, low) -> IRQ 23
[ 67.670093] nvidia 0000:02:00.0: setting latency timer to 64
[ 67.670098] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 67.670439] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
[ 67.670443] nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23
[ 67.670450] nvidia 0000:03:00.0: setting latency timer to 64
[ 67.670454] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 67.671094] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.33 Sat Mar 17 14:55:45 PDT 2012
[ 67.948901] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 67.949556] Registered led device: ath9k-phy0
[ 67.949565] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900018c0000, irq=21
[ 68.202195] Linux media interface: v0.10
[ 68.299438] Linux video capture interface: v2.00
[ 68.354064] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:5060)
[ 68.354757] input: UVC Camera (eb1a:5060) as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input12
[ 68.354860] usbcore: registered new interface driver uvcvideo
[ 68.354862] USB Video Class driver (1.1.1)
[ 68.467252] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[ 68.467258] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[ 68.467441] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 68.467455] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
[ 68.467459] hda_intel: Disabling MSI
[ 68.467512] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 68.678720] cfg80211: World regulatory domain updated:
[ 68.678724] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 68.678727] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 68.678731] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 68.678734] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 68.678737] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 68.678740] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 69.404030] hda_codec: ALC888: BIOS auto-probing.
[ 69.748153] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input13
[ 70.436471] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input14
[ 70.436560] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input15
[ 126.944084] ata2.00: limiting speed to PIO4
[ 126.944092] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 126.944162] sr 1:0:0:0: [sr0] CDB: Xpwrite, Read disk info: 51 00 00 00 00 00 00 00 20 00
[ 126.944183] ata2.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
[ 126.944191] res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 126.944323] ata2.00: status: { DRDY }
[ 126.944383] ata2: hard resetting link
[ 127.264059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 127.268890] ata2.00: configured for PIO4
[ 127.269298] ata2: EH complete
[ 132.280042] ata2.00: qc timeout (cmd 0xa0)
[ 132.280055] ata2.00: limiting speed to PIO3
[ 132.280062] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 132.280129] ata2.00: irq_stat 0x40000001
[ 132.280194] sr 1:0:0:0: [sr0] CDB: Inquiry: 12 01 00 00 fe 00
[ 132.280213] ata2.00: cmd a0/00:00:00:fe:00/00:00:00:00:00/a0 tag 0 pio 16640 in
[ 132.280215] res 51/50:03:00:fe:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 132.280349] ata2.00: status: { DRDY ERR }
[ 132.280409] ata2: hard resetting link
[ 132.600050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 132.604963] ata2.00: configured for PIO3
[ 132.605375] ata2: EH complete
[ 134.158864] Adding 9764860k swap on /dev/sda1. Priority:-1 extents:1 across:9764860k
[ 134.229722] Adding 9765884k swap on /dev/sda2. Priority:-2 extents:1 across:9765884k
[ 134.312719] Adding 9999356k swap on /dev/sda5. Priority:-3 extents:1 across:9999356k
[ 134.647799] loop: module loaded
[ 135.070991] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 135.074113] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 135.074177] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 139.453030] fuse init (API version 7.17)
[ 147.033612] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16
[ 148.196019] eth0: no IPv6 routers present
[ 149.670499] Bluetooth: Core ver 2.16
[ 149.670522] NET: Registered protocol family 31
[ 149.670524] Bluetooth: HCI device and connection manager initialized
[ 149.670528] Bluetooth: HCI socket layer initialized
[ 149.670530] Bluetooth: L2CAP socket layer initialized
[ 149.670538] Bluetooth: SCO socket layer initialized
[ 149.694295] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 149.694298] Bluetooth: BNEP filters: protocol multicast
[ 149.801535] Bluetooth: RFCOMM TTY layer initialized
[ 149.801541] Bluetooth: RFCOMM socket layer initialized
[ 149.801543] Bluetooth: RFCOMM ver 1.11
[ 166.465647] lp: driver loaded but no devices found
[ 166.594408] ppdev: user-space parallel port driver
[ 203.512248] postgres (3200): /proc/3200/oom_adj is deprecated, please use /proc/3200/oom_score_adj instead.
[ 245.503032] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 245.506156] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 245.506162] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 296.055155] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 296.060287] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 296.060293] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 348.055043] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 348.058290] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 348.058297] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 400.059044] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 400.066301] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 400.066309] sd 4:0:0:0: [sdb] Assuming drive cache: write through
