On Mon, Aug 3, 2009 at 4:31 PM, Arnd Hannemann<hannemann@xxxxxxxxxxxxxxxxxxx> wrote: > Martin-Éric Racine wrote: >> On Mon, Aug 3, 2009 at 4:19 PM, Arnd >> Hannemann<hannemann@xxxxxxxxxxxxxxxxxxx> wrote: >>> Martin-Éric Racine wrote: >>>> (non-subscriber post; please keep me in CC) >>>> >>>> Greetings, >>>> >>>> Having previously reported two issues via Ubuntu's bug tracker and not >>>> found any answer, I thought I'd approach the LKML with the issues at >>>> stake. >>>> >>>> 1) Since kernel 2.6.23, one cannot boot hardware based on the Geode >>>> SCx200 series. Partial answers about the most plausible cause have >>>> been found by the target hardware's manufacturer as explained at >>>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/241307 >>>> >>>> 2) Since kernel 2.6.31-rc4, one cannot boot hardware based on the >>>> Geode LX800 as described at >>>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/396286 >>>> >>>> In case either of these issues was already reported and there is a >>>> know fix or work-around, I'd love to hear more. Otherwise, please feel >>>> free to contact me for additional details. >>>> >>> Just to give a data point: >>> 2.6.31-rc1,2,3,4,5 were/are running all fine on my Geode LX800 >>> (http://www.pcengines.ch/alix2d2.htm) so it seems something >>> board or .config specific. >> >> Thank you for your answer, Arnd. >> >> Could you please send me a copy of your .config so that I can compare >> it with the one used on Ubuntu kernels? > > Sure. Config for 2.6.31-rc5 is attached. Could you try enabling CONFIG_FS_POSIX_ACL in your config and building a new kernel? Does it still boot? Martin-Éric -- To unsubscribe from this list: send the line "unsubscribe kernel-testers" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
