Hi. I'm got strange errors on startup with HDD and new kernel: [4.528333] sd 0:0:0:0 [sda] Write protect: off [4.528609] sd 0:0:0:0 [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [4.528788] sda: <3>sd 0:0:0:0 timing out command, waited 180 s [184.530108] sd 0:0:0:0 [sda] Result: hostbyte=0x00 driverbyte=0x00 [184.530249] end_request: I/O error, dev sda, sector 0 [184.530354] Buffer I/O error on device sda, logical block 0 [364.533812] unable to read partition table [364.535118] sd 0:0:0:0: [sda] Attached SCSI disk [364.536862] sd 0:0:0:0: Attached SCSI generic sg0 type0 [386.543348] SCSI 1:0:0:0 timing out command, waited 22s And similar picture with sdb. sda is 80Gb IDE hard drive, sdb - 320Gb SATA, motherboard with Intel ICH5 chipset Compiled on base of config from 2.6.27, but it working nice
Attachment:
config-2.6.27.tar.gz
Description: GNU Zip compressed data
Attachment:
config-2.6.28-rc1.tar.gz
Description: GNU Zip compressed data
Attachment:
lspci.tar.gz
Description: GNU Zip compressed data
