last working kernel 1ecd27657b735128a728ebf0c31fce5e1456718a x86: unify crashkernel reservation for 32 and 64 bit kernel i can compile but not working 55f262391a2365d657a00ed68edd1a51bca66af5 x86: rename setup_32.c to setup.c it will freeze with message: Kernel alive Kernel really alive PANIC: early exception 0e rip 10:ffffffff803178b2 error 2 cr2 ffffffffff300000 i assume this bug was introduced by this patch set between this two patches (may be not bat i need some where to begin)... it seems to have a lot of dependencies, so i can't compile or bisect it. wary last git kernel will freeze with : [ 5.904697] EXT3-fs: mounted filesystem with ordered data mode. [ 5.904749] VFS: Mounted root (ext3 filesystem) readonly. [ 5.904807] Freeing unused kernel memory: 312k freed [ 5.904983] Write protecting the kernel read-only data: 3968k [ 5.987836] Kernel panic - not syncing: No init found. Try passing init= option to kernel. Am Donnerstag, den 17.07.2008, 12:38 +0200 schrieb Alexey Fisher: > Because of some other bugs, still can't really bisect it. So i need your > help. > > with latest kernel i will get: > [ 5.904697] EXT3-fs: mounted filesystem with ordered data mode. > [ 5.904749] VFS: Mounted root (ext3 filesystem) readonly. > [ 5.904807] Freeing unused kernel memory: 312k freed > [ 5.904983] Write protecting the kernel read-only data: 3968k > [ 5.987836] Kernel panic - not syncing: No init found. Try passing > init= option to kernel. > > same configuration as other kernels... bug history looks like this: > latest bad git 2.6.26-03414-g33af79d > > a lot of can't compile -> may be this bug was introduced here > > 1.last good 3de352bbd86f890dd0c5e1c09a6a1b0b29e0f8ce > > 2.b4df32f4aeef8794d0135fc8dc250acb44cfee60 -> can't boot, kernel panic > on the realy begin -> is this bug began here ? > > 3.22cac1670786108ccd4caa0656c39fa4ba69fa7d -> can't boot without panic > -> or the beginig of this bug here : > > [ 6.371469] kjournald starting. Commit interval 5 seconds > [ 6.380455] EXT3-fs: mounted filesystem with ordered data mode. > [ 6.380455] VFS: Mounted root (ext3 filesystem) readonly. > [ 6.380455] debug: unmapping init memory > ffffffff806be000..ffffffff80767000 > [ 30.573683] CPA self-test: > [ 30.573902] 4k 4496 large 1011 gb 0 x > 1534[ffff880000000000-ffff88003fe00000] miss 0 > [ 30.586086] 4k 178576 large 671 gb 0 x > 91470[ffff880000000000-ffff88003ffff000] miss 0 > [ 30.595042] 4k 178576 large 671 gb 0 x > 91470[ffff880000000000-ffff88003ffff000] miss 0 > [ 30.595108] ok. > here will just freeze. > > -- > To unsubscribe from this list: send the line "unsubscribe kernel-testers" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html
[ 0.000000] Linux version 2.6.26-slub-03414-g33af79d (lex@zwerg) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #3 SMP PREEMPT Thu Jul 17 09:42:34 CEST 2008 [ 0.000000] Command line: root=/dev/sda1 netconsole=4444@xxxxxxxxxxxxx/eth0,6666@xxxxxxxxxxxx/00:02:b3:35:5f:01 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f790000 (usable) [ 0.000000] BIOS-e820: 000000007f790000 - 000000007f79e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f79e000 - 000000007f7e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] last_pfn = 0x7f790 max_arch_pfn = 0x3ffffffff [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping [ 0.000000] last_map_addr: 7f790000 end: 7f790000 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FA5D0, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 7F790100, 0054 (r1 NEC 6000701 MSFT 97) [ 0.000000] ACPI: FACP 7F790290, 00F4 (r3 A_M_I_ OEMFACP 6000701 MSFT 97) [ 0.000000] ACPI: DSDT 7F790590, 4BD8 (r1 A0281 A0281081 81 INTL 20060113) [ 0.000000] ACPI: FACS 7F79E000, 0040 [ 0.000000] ACPI: APIC 7F790390, 0080 (r1 A_M_I_ OEMAPIC 6000701 MSFT 97) [ 0.000000] ACPI: SLIC 7F790410, 0176 (r1 NEC 6000701 MSFT 97) [ 0.000000] ACPI: OEMB 7F79E040, 006B (r1 A_M_I_ AMI_OEM 6000701 MSFT 97) [ 0.000000] ACPI: HPET 7F795170, 0038 (r1 A_M_I_ OEMHPET 6000701 MSFT 97) [ 0.000000] ACPI: MCFG 7F7951B0, 003C (r1 A_M_I_ OEMMCFG 6000701 MSFT 97) [ 0.000000] (5 early reservations) ==> bootmem [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000708954] TEXT DATA BSS ==> [0000200000 - 0000708954] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f790 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:80380000) [ 0.000000] PERCPU: Allocating 48388 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513501 [ 0.000000] Kernel command line: root=/dev/sda1 netconsole=4444@xxxxxxxxxxxxx/eth0,6666@xxxxxxxxxxxx/00:02:b3:35:5f:01 ro [ 0.000000] Initializing CPU#0 [ 0.000000] Preemptible RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Detected 3200.311 MHz processor. [ 0.001999] Console: colour VGA+ 80x25 [ 0.001999] console [tty0] enabled [ 0.001999] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001999] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001999] Checking aperture... [ 0.001999] No AGP bridge found [ 0.001999] Memory: 2050596k/2088512k available (2948k kernel code, 37168k reserved, 1300k data, 312k init) [ 0.001999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.001999] Calibrating delay loop (skipped), value calculated using timer frequency.. <6>6400.62 BogoMIPS (lpj=3200311) [ 0.001999] Security Framework initialized [ 0.001999] Root Plug module initialized, vendor_id = 0557, product id = 2008 [ 0.001999] Mount-cache hash table entries: 256 [ 0.001999] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.001999] CPU: L2 cache: 2048K [ 0.001999] CPU: Physical Processor ID: 0 [ 0.001999] CPU: Processor Core ID: 0 [ 0.001999] CPU0: Thermal monitoring enabled (TM1) [ 0.001999] ACPI: Core revision 20080609 [ 0.022996] CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04 [ 0.023090] Using local APIC timer interrupts. [ 0.024996] Detected 12.501 MHz APIC timer. [ 0.024996] Booting processor 1/1 ip 6000 [ 0.034994] Initializing CPU#1 [ 0.095119] Calibrating delay using timer specific routine.. <6>6400.67 BogoMIPS (lpj=3200338) [ 0.095130] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.095132] CPU: L2 cache: 2048K [ 0.095135] CPU: Physical Processor ID: 0 [ 0.095136] CPU: Processor Core ID: 0 [ 0.095148] CPU1: Thermal monitoring enabled (TM1) [ 0.095631] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.095985] CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04 [ 0.096398] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.097985] Brought up 2 CPUs [ 0.097985] Total of 2 processors activated (12801.29 BogoMIPS). [ 0.097985] net_namespace: 1176 bytes [ 0.098125] NET: Registered protocol family 16 [ 0.098720] No dock devices found. [ 0.098770] ACPI: bus type pci registered [ 0.098874] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support. [ 0.102633] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.102675] PCI: Using configuration type 1 for base access [ 0.115442] ACPI: Interpreter enabled [ 0.115486] ACPI: (supports S0 S1 S3 S4 S5) [ 0.115653] ACPI: Using IOAPIC for interrupt routing [ 0.124854] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.125173] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.125217] pci 0000:00:1b.0: PME# disabled [ 0.125305] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.125349] pci 0000:00:1c.0: PME# disabled [ 0.125436] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.125484] pci 0000:00:1c.1: PME# disabled [ 0.125802] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.125847] pci 0000:00:1d.7: PME# disabled [ 0.126000] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.126056] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.126211] pci 0000:00:1f.2: PME# supported from D3hot [ 0.126253] pci 0000:00:1f.2: PME# disabled [ 0.126563] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.126611] pci 0000:02:00.0: PME# disabled [ 0.126905] pci 0000:00:1e.0: transparent bridge [ 0.132122] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.132535] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.132952] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 *14 15) [ 0.133357] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.133768] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 *15) [ 0.134173] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.134640] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.135107] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.135831] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 70, should be 6F [20080609] [ 0.136061] ACPI: WMI: Mapper loaded [ 0.136104] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.136216] pnp: PnP ACPI init [ 0.136267] ACPI: bus type pnp registered [ 0.141033] pnp: PnP ACPI: found 15 devices [ 0.141073] ACPI: ACPI bus type pnp unregistered [ 0.141470] SCSI subsystem initialized [ 0.141918] usbcore: registered new interface driver usbfs [ 0.142082] usbcore: registered new interface driver hub [ 0.142232] usbcore: registered new device driver usb [ 0.142849] PCI: Using ACPI for IRQ routing [ 0.149481] DMAR:parse DMAR table failure. [ 0.149542] PCI-GART: No AMD northbridge found. [ 0.149592] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.149720] hpet0: 3 64-bit timers, 14318180 Hz [ 0.163333] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.163393] system 00:06: ioport range 0x290-0x297 has been reserved [ 0.163448] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.163491] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.163533] system 00:07: ioport range 0x400-0x41f has been reserved [ 0.163575] system 00:07: ioport range 0x480-0x4bf has been reserved [ 0.163596] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.163596] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.163649] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.163703] system 00:07: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.163763] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.163807] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.163857] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.164476] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.164538] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.164582] system 00:0e: iomem range 0xc0000-0xdffff has been reserved [ 0.164628] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.164676] system 00:0e: iomem range 0x100000-0x7f7fffff could not be reserved [ 0.165708] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 0.165752] pci 0000:00:1c.0: IO window: 0xe000-0xefff [ 0.165796] pci 0000:00:1c.0: MEM window: disabled [ 0.165838] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.165885] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.165929] pci 0000:00:1c.1: IO window: 0xd000-0xdfff [ 0.165972] pci 0000:00:1c.1: MEM window: 0xcff00000-0xcfffffff [ 0.166017] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.166063] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.166108] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.166151] pci 0000:00:1e.0: MEM window: disabled [ 4.451511] scsi1 : ata_piix [ 4.453919] ata1: PATA max UDMA/100 cmd 0xa000 ctl 0x9800 bmdma 0x8800 irq 18 [ 4.453967] ata2: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8808 irq 18 [ 4.608079] ata1.00: ATAPI: HP DVD Writer 840b, FF66, max UDMA/33 [ 4.613986] ata1.00: configured for UDMA/33 [ 4.775449] isa bounce pool size: 16 pages [ 4.777216] scsi 0:0:0:0: CD-ROM HP DVD Writer 840b FF66 PQ: 0 ANSI: 5 [ 4.782529] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.782593] Uniform CD-ROM driver Revision: 3.20 [ 4.783044] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 4.783193] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.783248] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 4.783555] scsi2 : ata_piix [ 4.783807] scsi3 : ata_piix [ 4.784005] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 17 [ 4.784057] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 17 [ 4.937848] ata3.00: ATA-6: ST380817AS, 3.42, max UDMA/133 [ 4.937901] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (not used) [ 4.943851] ata3.00: configured for UDMA/133 [ 5.105434] scsi 2:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5 [ 5.105790] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.105858] sd 2:0:0:0: [sda] Write Protect is off [ 5.105938] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.106055] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.106119] sd 2:0:0:0: [sda] Write Protect is off [ 5.106198] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.106256] sda: sda1 sda4 < sda5 sda6 > [ 5.149305] sd 2:0:0:0: [sda] Attached SCSI disk [ 5.149505] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 5.149752] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.149825] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.149959] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 5.153914] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.153972] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfeffc00 [ 5.163521] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.163716] usb usb1: configuration #1 chosen from 1 choice [ 5.163844] hub 1-0:1.0: USB hub found [ 5.163897] hub 1-0:1.0: 8 ports detected [ 5.264855] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.264900] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.264954] usb usb1: Product: EHCI Host Controller [ 5.264994] usb usb1: Manufacturer: Linux 2.6.26-slub-03414-g33af79d ehci_hcd [ 5.265038] usb usb1: SerialNumber: 0000:00:1d.7 [ 5.265182] USB Universal Host Controller Interface driver v3.0 [ 5.265251] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.265305] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.265434] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.265511] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007400 [ 5.265709] usb usb2: configuration #1 chosen from 1 choice [ 5.265847] hub 2-0:1.0: USB hub found [ 5.265914] hub 2-0:1.0: 2 ports detected [ 5.366809] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.366855] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.366908] usb usb2: Product: UHCI Host Controller [ 5.366948] usb usb2: Manufacturer: Linux 2.6.26-slub-03414-g33af79d uhci_hcd [ 5.366992] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.367050] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.367102] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.367238] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.367313] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007800 [ 5.367491] usb usb3: configuration #1 chosen from 1 choice [ 5.367637] hub 3-0:1.0: USB hub found [ 5.367690] hub 3-0:1.0: 2 ports detected [ 5.468792] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.468838] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.468891] usb usb3: Product: UHCI Host Controller [ 5.468932] usb usb3: Manufacturer: Linux 2.6.26-slub-03414-g33af79d uhci_hcd [ 5.468976] usb usb3: SerialNumber: 0000:00:1d.1 [ 5.469057] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.469110] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.469238] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.469314] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008000 [ 5.469495] usb usb4: configuration #1 chosen from 1 choice [ 5.469637] hub 4-0:1.0: USB hub found [ 5.469689] hub 4-0:1.0: 2 ports detected [ 5.570792] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.570844] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.570904] usb usb4: Product: UHCI Host Controller [ 5.570944] usb usb4: Manufacturer: Linux 2.6.26-slub-03414-g33af79d uhci_hcd [ 5.570988] usb usb4: SerialNumber: 0000:00:1d.2 [ 5.571048] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.571101] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.571238] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.571320] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008400 [ 5.571500] usb usb5: configuration #1 chosen from 1 choice [ 5.571645] hub 5-0:1.0: USB hub found [ 5.571698] hub 5-0:1.0: 2 ports detected [ 5.672814] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.672860] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.672913] usb usb5: Product: UHCI Host Controller [ 5.672954] usb usb5: Manufacturer: Linux 2.6.26-slub-03414-g33af79d uhci_hcd [ 5.672998] usb usb5: SerialNumber: 0000:00:1d.3 [ 5.674508] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 5.838528] usb 3-2: configuration #1 chosen from 1 choice [ 5.841822] usb 3-2: New USB device found, idVendor=046d, idProduct=c00e [ 5.841868] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.841912] usb 3-2: Product: USB-PS/2 Optical Mouse [ 5.841953] usb 3-2: Manufacturer: Logitech [ 5.842083] usbcore: registered new interface driver libusual [ 5.842318] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 5.842363] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.843598] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.843851] mice: PS/2 mouse device common for all mice [ 5.843983] i2c /dev entries driver [ 5.844213] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.861145] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 5.871310] w83627ehf: Found W83627EHG chip at 0x290 [ 5.871582] w83627ehf w83627ehf.656: VID pins in output mode, CPU VID not available [ 5.871879] md: raid1 personality registered for level 1 [ 5.871928] cpuidle: using governor ladder [ 5.871973] cpuidle: using governor menu [ 5.872111] Advanced Linux Sound Architecture Driver Version 1.0.17. [ 5.872160] ALSA device list: [ 5.872201] No soundcards found. [ 5.872682] TCP cubic registered [ 5.872951] md: Autodetecting RAID arrays. [ 5.872995] md: Scanned 0 and added 0 devices. [ 5.873035] md: autorun ... [ 5.873082] md: ... autorun DONE. [ 5.904644] kjournald starting. Commit interval 5 seconds [ 5.904697] EXT3-fs: mounted filesystem with ordered data mode. [ 5.904749] VFS: Mounted root (ext3 filesystem) readonly. [ 5.904807] Freeing unused kernel memory: 312k freed [ 5.904983] Write protecting the kernel read-only data: 3968k [ 5.987836] Kernel panic - not syncing: No init found. Try passing init= option to kernel.
