On Sat, 15 Jun 2019 12:13:15 +0200 Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx> wrote: > Hi, Hi, > Other than that, we can probably manage keeping a tree around (at the > Replicant project) with mainline and this patch (enabled through a > dedicated config option). As long as it's not horrible to rebase, it > can work well enough for us. I've managed to buy a new Galaxy SIII 4G (I9305) and I've tried u-boot on it, and it works flawlessly without any patches and it does also work with CONFIG_STACKPROTECTOR_PER_TASK=y. Merely rebasing that arm decompressor patch over time should not be an issue. However I really want to find a way to avoid having to look again and again over time for commits that incidentally broke booting, because, the bootloader doesn't do what it's supposed to do. > Maybe we could also consider having a shim that is executed before the > kernel in order to sanitize things and allow booting a mainline > kernel, which would be less invasive than a full U-Boot port. If I understand correctly, that isn't a solution either as it would also be affected by the issues mentioned by Russell King. More specifically I would need to do more research to find if the bootloader(s) shipped on such smartphones properly cleans and invalidates the caches before jumping to the first instruction. Doing that research probably requires decompiling the bootloader, which in turn would require me to get legal advise to understand if it's possible to do it, and if so how to do it while respecting the laws involved, and still being able to work on free and open source bootloaders without creating issues for the projects. Another alternative to that would be to make users use u-boot but this is not possible either because: - The bootloader is signed. So the bootrom checks the signature of the first bootloader (BL1), which in turn checks the second bootloader (S-Boot) in which the MMU setup probably happens. So I can't merely replace S-Boot like that. - Fortunately for that system on a chip, there is at least one BL1 that is signed but that doesn't check subsequent signatures[1]. The issue is that it's not redistributable[2]. If that BL1 had not been published I would always need to use additional patches to test the patch I send, which is very problematic in many ways: - The additional patches would need to be mentioned in most or all of the commits I send upstream. - If not, the maintainers and readers of the patch would be unaware that it would require another patch on top to work. So thanks to that, I'm at least able to test the patches I send in Linux without requiring additional patches on top, but I'm still not able to ship something usable to end users. This means that the work to complete the support for the affected devices will be way less useful, as there would be no guarantee of users still being able to use the device with newer Linux kernels. Are there other (Android) smartphones affected by similar bootloader issues? If so is it even possible to replace part of the bootloader? Did some people found a way to deal with that kind of bootloader issue? References: ----------- [1]https://wiki.odroid.com/_media/en/boot.tar.gz [2]https://github.com/hardkernel/u-boot_firmware/issues/1 Denis.
Attachment:
pgpTZ2bMIlHZv.pgp
Description: OpenPGP digital signature