Hi,
dmesg output gives error when I login:
***
Jan 11 19:57:43 home kernel: ata1.00: configured for UDMA/100
Jan 11 19:57:43 home kernel: ata1.01: configured for UDMA/33
Jan 11 19:57:43 home kernel: ata1: EH complete
Jan 11 19:57:43 home kernel: ata3.00: configured for UDMA/133
Jan 11 19:57:43 home kernel: ata3: EH complete
***
SMART output:
***
Error 189 occurred at disk power-on lifetime: 29930 hours (1247 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 fe 00 00 00 40 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 05 fe 00 00 00 40 00 1d+03:45:06.750 SET FEATURES [Enable APM]
ca 00 08 97 87 8c ea 00 1d+03:45:05.688 WRITE DMA
ca 00 08 57 82 8c ea 00 1d+03:45:05.688 WRITE DMA
ca 00 08 ef 42 78 ef 00 1d+03:45:04.875 WRITE DMA
ca 00 08 c7 41 78 ef 00 1d+03:45:04.875 WRITE DMA
***
As I understand it is APM related and happens because of:
***
# hdparm -B /dev/sda
/dev/sda:
APM_level = not supported
***
___________________________________________________
This message is from the kde mailing list.
Account management: https://mail.kde.org/mailman/listinfo/kde.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
