Duh.. of course. Thanks again! -- Joe On 06/24/2016 05:06 PM, Neil Horman wrote: > Sure, it can, just add: > Echo (mask) >/proc/irq/n/smp-affinity > To the policy script > Neil > > > On Fri, Jun 24, 2016, 16:59 Joe Lawrence <joe.lawrence at stratus.com > <mailto:joe.lawrence at stratus.com>> wrote: > > Thanks Neil, policyscript looks promising. From the manpage, irqbalance > will understand "ban, balance_level, and numa_node", so I don't suppose > the policyscript can provide the smp_affinity directly? > > -- Joe > > On 06/24/2016 04:43 PM, Neil Horman wrote: > > Hey Joe, > > > > You have a few choices. You can do exactly what you are > describing > > above, or you can use the policy-script option. > > > > The option you provide, one in which you compute the irqs you want to > > ignore (or ban, in the irqbalance man page parlance) in the sysconfig > > file is not really used that often, but might be handy in some cases. > > > > The more common method is using the policyscrpt option, in which you > > provide irqbalance with the name of a script to run for each > discovered > > irq. The script accepts the device sysfs path and irq number as > > arguments, and you can echo "ban=1" from it to tell irqbalance to > > ban/ignore the corresponding irq. It should be documented in the > man page > > > > Neil > > > > > > On Fri, Jun 24, 2016 at 4:35 PM Joe Lawrence > <joe.lawrence at stratus.com <mailto:joe.lawrence at stratus.com> > > <mailto:joe.lawrence at stratus.com > <mailto:joe.lawrence at stratus.com>>> wrote: > > > > Hi Neil et al, > > > > I was wondering about the best way to configure irqbalance to > ignore > > particular IRQs without hard-coding their IRQ numbers into > > /etc/sysconfig/irqbalance or manually starting the daemon. > > > > I was wondering if something like this would work: > > > > IRQBALANCE_ARGS="--banirq=$(get IRQ1#) --banirq=$(get IRQ2#)" > > > > or better yet: > > > > IRQBALANCE_ARGS="--banirq=desc1 --banirq=desc2" > > > > where descX would be the IRQ description. > > > > > > Alternatively, is there anyway to mark irqs as banned once the > daemon > > has already started? > > > > > > Thanks, > > > > -- Joe > > >
