Hi, The recommended way to use io_uring for networking workloads is to use ring provided buffers. The application sets up a ring (or several) for buffers, and puts buffers for receiving data into them. When a recv completes, the completion contains information on which buffer data was received into. You can even use bundles with receive, and receive data into multiple buffers at the same time. This all works fine, but has some limitations in that a buffer is always fully consumed. This patchset adds support for partial consumption of a buffer. This, in turn, allows an application to supply fewer buffers for receives, but of a much larger size. For example, rather than add a ton of 1500b buffers for receiving data, the application can just add one large buffer. Whenever data is received, only the current head part of the buffer is consumed and used. This leads to less iteration of buffers, and also eliminates any potential wasteage of memory if some of the receives only partially fill a provided buffer. Patchset is lightly tested, passes current tests and also the new test cases I wrote for it. The liburing 'pbuf-ring-inc' branch has extra tests and support for this, as well as having examples/proxy support incrementally consumed buffers. Using incrementally consumed buffers from an application point of view is fairly trivial. Just pass the flag IOU_PBUF_RING_INC to io_uring_setup_buf_ring(), and this marks this buffer group ID as being incrementally consumed. Outside of that, the application just needs to keep track of where the current read/recv point is at. See patch 4 for details. Non-incremental buffer completions are always final, in that any completion will pass back a buffer to the application. For incrementally consumed buffers, this isn't always the case, as the kernel may generate more completions for a given buffer ID, if there's more room left in it. There's a new CQE flag for that, IORING_CQE_F_BUF_MORE. If set, the application should expect more completions for this buffer ID. Patch 1+2 are just basic prep patches, patch 3 reverts not being able to set sqe->len for provide buffers for send, and patch 4 adds a 'len argument to the kbuf consumption code. With incrementally consumed buffers, controlling len is important as otherwise it would be very easy to flood the outgoing socket buffer. Patch 5 is the meat of it. But still pretty darn simple. Note that this feature ONLY works with ring provide buffers, not with legacy/classic provided buffers. Code can also be found here: https://git.kernel.dk/cgit/linux/log/?h=io_uring-pbuf-partial and it's based on current -git with the pending 6.12 io_uring patches pulled in first. Comments/reviews welcome! include/uapi/linux/io_uring.h | 18 +++++++++ io_uring/io_uring.c | 2 +- io_uring/kbuf.c | 61 ++++++++++++++++------------ io_uring/kbuf.h | 76 ++++++++++++++++++++++++++--------- io_uring/net.c | 12 +++--- io_uring/rw.c | 8 ++-- 6 files changed, 120 insertions(+), 57 deletions(-) Changes since v3: - Split "kbuf consumption takes length argument" out from the main patch. It's a separate change anyway, in preparation for consuming less than the entire buffer. - Add a few comments. -- Jens Axboe
