Re: Short sends returned in IORING

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 12, 2022 at 7:28 PM Jens Axboe <axboe@xxxxxxxxx> wrote:
>
> On 5/11/22 8:56 AM, Constantine Gavrilov wrote:
> > On Wed, May 4, 2022 at 6:55 PM Jens Axboe <axboe@xxxxxxxxx> wrote:
> >>
> >> On 5/4/22 9:28 AM, Jens Axboe wrote:
> >>> On 5/4/22 9:21 AM, Constantine Gavrilov wrote:
> >>>> On Wed, May 4, 2022 at 4:54 PM Jens Axboe <axboe@xxxxxxxxx> wrote:
> >>>>>
> >>>>> On 5/3/22 5:05 PM, Constantine Gavrilov wrote:
> >>>>>> Jens:
> >>>>>>
> >>>>>> This is related to the previous thread "Fix MSG_WAITALL for
> >>>>>> IORING_OP_RECV/RECVMSG".
> >>>>>>
> >>>>>> We have a similar issue with TCP socket sends. I see short sends
> >>>>>> regarding of the method (I tried write, writev, send, and sendmsg
> >>>>>> opcodes, while using MSG_WAITALL for send and sendmsg). It does not
> >>>>>> make a difference.
> >>>>>>
> >>>>>> Most of the time, sends are not short, and I never saw short sends
> >>>>>> with loopback and my app. But on real network media, I see short
> >>>>>> sends.
> >>>>>>
> >>>>>> This is a real problem, since because of this it is not possible to
> >>>>>> implement queue size of > 1 on a TCP socket, which limits the benefit
> >>>>>> of IORING. When we have a short send, the next send in queue will
> >>>>>> "corrupt" the stream.
> >>>>>>
> >>>>>> Can we have complete send before it completes, unless the socket is
> >>>>>> disconnected?
> >>>>>
> >>>>> I'm guessing that this happens because we get a task_work item queued
> >>>>> after we've processed some of the send, but not all. What kernel are you
> >>>>> using?
> >>>>>
> >>>>> This:
> >>>>>
> >>>>> https://git.kernel.dk/cgit/linux-block/commit/?h=for-5.19/io_uring&id=4c3c09439c08b03d9503df0ca4c7619c5842892e
> >>>>>
> >>>>> is queued up for 5.19, would be worth trying.
> >>>>>
> >>>>> --
> >>>>> Jens Axboe
> >>>>>
> >>>>
> >>>> Jens:
> >>>>
> >>>> Thank you for your reply.
> >>>>
> >>>> The kernel is 5.17.4-200.fc35.x86_64. I have looked at the patch. With
> >>>> the solution in place, I am wondering whether it will be possible to
> >>>> use multiple uring send IOs on the same socket. I expect that Linux
> >>>> TCP will serialize multiple send operations on the same socket. I am
> >>>> not sure it happens with uring (meaning that socket is blocked for
> >>>> processing a new IO until the pending IO completes). Do I need
> >>>> IOSQE_IO_DRAIN / IOSQE_IO_LINK for this to work? Would not be optimal
> >>>> because of multiple different sockets in the same uring. While I
> >>>> already have a workaround in the form of a "software" queue for
> >>>> streaming data on TCP sockets, I would rather have kernel to do
> >>>> "native" queueing in sockets layer, and have exrtra CPU cycles
> >>>> available to the  application.
> >>>
> >>> The patch above will mess with ordering potentially. If the cause is as
> >>> I suspect, task_work causing it to think it's signaled, then the better
> >>> approach may indeed be to just flush that work and retry without
> >>> re-queueing the current one. I can try a patch against 5.18 if you are
> >>> willing and able to test?
> >>
> >> You can try something like this, if you run my for-5.19/io_uring branch.
> >> I'd be curious to know if this solves the short send issue for you.
> >>
> >>
> >> diff --git a/fs/io_uring.c b/fs/io_uring.c
> >> index f6b6db216478..b835e80be1fa 100644
> >> --- a/fs/io_uring.c
> >> +++ b/fs/io_uring.c
> >> @@ -5684,6 +5684,7 @@ static int io_sendmsg(struct io_kiocb *req, unsigned int issue_flags)
> >>         if (flags & MSG_WAITALL)
> >>                 min_ret = iov_iter_count(&kmsg->msg.msg_iter);
> >>
> >> +retry:
> >>         ret = __sys_sendmsg_sock(sock, &kmsg->msg, flags);
> >>
> >>         if (ret < min_ret) {
> >> @@ -5694,6 +5695,8 @@ static int io_sendmsg(struct io_kiocb *req, unsigned int issue_flags)
> >>                 if (ret > 0 && io_net_retry(sock, flags)) {
> >>                         sr->done_io += ret;
> >>                         req->flags |= REQ_F_PARTIAL_IO;
> >> +                       if (io_run_task_work())
> >> +                               goto retry;
> >>                         return io_setup_async_msg(req, kmsg);
> >>                 }
> >>                 req_set_fail(req);
> >> @@ -5744,6 +5747,7 @@ static int io_send(struct io_kiocb *req, unsigned int issue_flags)
> >>                 min_ret = iov_iter_count(&msg.msg_iter);
> >>
> >>         msg.msg_flags = flags;
> >> +retry:
> >>         ret = sock_sendmsg(sock, &msg);
> >>         if (ret < min_ret) {
> >>                 if (ret == -EAGAIN && (issue_flags & IO_URING_F_NONBLOCK))
> >> @@ -5755,6 +5759,8 @@ static int io_send(struct io_kiocb *req, unsigned int issue_flags)
> >>                         sr->buf += ret;
> >>                         sr->done_io += ret;
> >>                         req->flags |= REQ_F_PARTIAL_IO;
> >> +                       if (io_run_task_work())
> >> +                               goto retry;
> >>                         return -EAGAIN;
> >>                 }
> >>                 req_set_fail(req);
> >>
> >> --
> >> Jens Axboe
> >>
> >
> > Jens:
> >
> > I was able to test the first change on the top of Linus kernel git
> > (5.18.0-rc6).
> >
> > I do not get short sends anymore, but I get corruption in  sent
> > packets (corruption is detected by the receiver). It looks like short
> > sends handled by the patch intermix data from multiple send SQEs in
> > the stream, so ordering of multiple SQEs in URING becomes broken.
>
> Unless you specifically ask for ordering (eg using IOSQE_IO_LINK), then
> there is no guaranteed ordering for sends. So it's quite possible to end
> up with the scenario you describe, where you end up with interleaved
> data from two requests if they are not able to send out all their data
> in one go (eg running out of space).
>
>
> --
> Jens Axboe
>

Jens:

I have looked at the kernel sockets code and uring io_sendmsg() implementation.

The URING will call __sys_sendmsg_sock() which is the same code path
as Linux blocking system call for sendmsg() API.

This will eventually call inet6_sendmsg() / inet_sendmsg() (after
copying the buffers and doing the checks), and for the tcp case , both
functions will directly call tcp_sendmsg(). The call tcp_sendmsg() has
internal locking inside:

int tcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
{
int ret;

lock_sock(sk);
ret = tcp_sendmsg_locked(sk, msg, size);
release_sock(sk);

return ret;
}

This means multiple sends on the sockets are protected, until the code
returns. The real problem is that tcp_sendmsg_locked() currently does
nothing with the MSG_WAITALL flag, and partial sends can be returned.
If my memory serves me right, the flag was honored before, but was
removed later as a Linux only extension for sendmsg().

While we can replicate __sys_sendmsg_sock() behavior of validating the
arguments and copying the user-space buffers, and then lock socket and
call sock->ops->sendmsg_locked() and handle the partial sends inside,
I feel it is duplicating existing kernel code. I can provide this
implementation, but I doubt it will ever be accepted.

The real fix (if people want this feature) is adding support for
MSG_WAITALL to tcp_sendmsg_locked(). Then the uring does not need to
do anything else.

Another thing is that tcp_sendmsg_locked() will wait for buffers using
timeout returned by sock_sndtimeo(sk, flags & MSG_DONTWAIT), so
modifying the send timeout may be a good option, but I have not
investigating if there are internal limitations on setting the timeout
or using it in sk_stream_wait_memory(sk, &timeo). I will try setting
the large send timeout and perhaps patching tcp_sendmsg() to not do an
early return if sk_stream_wait_memory(sk, &timeo) returns an error and
MSG_WAITALL flag was set.

Jens, what are your thoughts on this? It does not seem that your patch
for 5.19 for sendmsg() follows the sendmsg() current behavior, and
retrying sends on a non-locked socket is not correct. If fix anything
(and I believe we need the fix), we need to fix it in tcp_sendmsg().

Other issues with muti-queue TCP sends are:
1. Ordering between individual CQEs (when the use the same socket
operation). I hope URING preserves the order of SQE processing?
2. I see that there is no asynchronous interface on socket sends (not
sure how Linux async IO handles it). This means that since we are
using blocking IO send operations, operations on one socket will block
operations on others. This is not ideal.














io_sendmsg


-- 
----------------------------------------
Constantine Gavrilov
Storage Architect
Master Inventor
Tel-Aviv IBM Storage Lab
1 Azrieli Center, Tel-Aviv
----------------------------------------



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux