On Fri, Jun 03, 2016 at 12:17:43PM +0300, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Apparently some CHV boards failed to hook up the port presence straps
> for HDMI ports as well (earlier we assumed this problem only affected
> eDP ports). So let's check the VBT in addition to the strap, and if
> either one claims that the port is present go ahead and register the
> relevant connector.
>
> While at it, change port D to register DP before HDMI as we do for ports
> B and C since
> commit 457c52d87e5d ("drm/i915: Only ignore eDP ports that are connected")
>
> Also print a debug message when we register a HDMI connector to aid
> in diagnosing missing/incorrect ports. We already had such a print for
> DP/eDP.
>
> v2: Improve the comment in the code a bit, note the port D change in
> the commit message
>
> Cc: Radoslav Duda <radosd@xxxxxxxxxx>
> Tested-by: Radoslav Duda <radosd@xxxxxxxxxx>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96321
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
Pushed to dinq. Thanks for the review.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
