Filter out a mode that exceeds the max pixel rate setting
for DP to VGA dongle. This is defined in DPCD register 0x81
if detailed cap info i.e. info field is 4 bytes long and
it is available for DP downstream port.
The register defines the pixel rate divided by 8 in MP/s.
v2: DPCD read outs and computation moved to drm (Ville, Daniel)
v3: Sink pixel rate computation moved to drm_dp_max_sink_dotclock()
function (Daniel)
v4: Use of drm_dp_helper.c routines to compute max pixel clock (Ville)
Signed-off-by: Mika Kahola <mika.kahola@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 096acbf0..1b94347 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -200,6 +200,23 @@ intel_dp_mode_valid(struct drm_connector *connector,
int target_clock = mode->clock;
int max_rate, mode_rate, max_lanes, max_link_clock;
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
+ bool is_branch_device;
+ int max_dp_clk;
+ int type;
+ uint8_t port_cap[4];
+
+ is_branch_device = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
+ DP_DWN_STRM_PORT_PRESENT;
+
+ if (is_branch_device) {
+ drm_dp_downstream_port_cap(&intel_dp->aux, intel_dp->dpcd, port_cap);
+ type = drm_dp_downstream_type(intel_dp->dpcd, port_cap);
+ max_dp_clk = drm_dp_downstream_max_clock(intel_dp->dpcd, port_cap);
+
+ if ((type == DP_DS_PORT_TYPE_VGA) && (max_dp_clk > 0)) {
+ max_dotclk = min(max_dotclk, max_dp_clk);
+ }
+ }
if (is_edp(intel_dp) && fixed_mode) {
if (mode->hdisplay > fixed_mode->hdisplay)
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
