On Sat, Jun 04, 2016 at 02:06:58PM -0700, Greg KH wrote:
> On Fri, May 27, 2016 at 11:30:30AM +0300, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > Several nasty i915 regressions affecting CHV slipped through
> > to 4.5 and 4.6.
> >
> > The first fix we want in 4.5 and 4.6 is
> > commit caed361d83b2 ("drm/i915: Fix watermarks for VLV/CHV")
> > It won't cherry-pick cleanly to either one, so I've included conflict
> > free versions for both. This one fixes display FIFO underruns that can
> > lead to the screen totally blanking out.
>
> Now applied, thanks.
>
> > The other one I'd like to have in 4.6 is
> > commit 9f6151c90390 ("drm/i915: Pass the correct crtc state to .update_plane()")
> > which avoids a totally corrupted display in some cases.
>
> Now applied.
>
> > And the third on is a bit more annoying. The regression is caused by
> > commit 9dbaab56ac09 ("drm/i915: Exit cherryview_irq_handler() after one pass")
> > which I though we had prevented from getting out on its own, but turns
> > out I was wrong. It basically makes the GPU unusable, so we do need to
> > fix it somehow. The simple solution would be to revert it in 4.6 only.
> > The more complicated solution is to backport the proper fix, which more
> > or less requires the following set of commits [1], which is maybe a bit
> > too much for stable. I could try to trim it a bit perhaps, but then we
> > start to enter the territory of untested code which I don't particularly
> > like. Let me know what you think.
> >
> > [1]
> > 1e1cace942ef ("drm/i915: Eliminate loop from VLV irq handler")
> > a5e485a95c9c ("drm/i915: Clear VLV_IER around irq processing")
> > 4a0a0202b023 ("drm/i915: Clear VLV_MASTER_IER around irq processing")
> > 7ce4d1f2730f ("drm/i915: Clear VLV_IIR after PIPESTAT")
> > 34c7b8a7b8b5 ("drm/i915: Set up VLV_MASTER_IER consistently")
> > e5328c43d46e ("drm/i915: Use GEN8_MASTER_IRQ_CONTROL consistently")
> > 71b8b41d5b35 ("drm/i915: Move DPINVGTT setup to vlv_display_irq_reset()")
> > 6b7eafc1b43d ("drm/i915: Warn if irq_mask isn't ~0 during vlv/cvh display irq postinstall")
> > 9ab981f22bef ("drm/i915: Use GEN5_IRQ_INIT() in vlv_display_irq_postinstall()")
> > d6c698035892 ("drm/i915: Clear display interrupt before enabling when turning on the power well")
> > 8bb613068a63 ("drm/i915: Move vlv/chv display irq code to a more logical place")
> > 9918271efc7a ("drm/i915: Skip display irq setup if display irqs aren't flagged as enabled")
> > ad22d10654ea ("drm/i915: Fix up vlv/chv display irq setup")
> > 93de68f94081 ("drm/i915: Remove "VLV magic" from irq setup")
>
> I think reverting that one patch for 4.6 makes more sense than adding
> all of these patches. I'll do that if you want me to.
That works for me. Thanks.
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
