i915_dma.c used to contain the DRI1/UMS horror show, but now all that
remains are the out-of-place driver level interfaces (such as
allocating, initialising and registering the driver). These should be in
i915_drv.c alongside similar routines for suspend/resume.
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/Makefile | 3 -
drivers/gpu/drm/i915/i915_dma.c | 1681 --------------------------------
drivers/gpu/drm/i915/i915_drv.c | 2049 +++++++++++++++++++++++++++++++++++----
drivers/gpu/drm/i915/i915_drv.h | 16 +-
4 files changed, 1843 insertions(+), 1906 deletions(-)
delete mode 100644 drivers/gpu/drm/i915/i915_dma.c
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 7e2944406b8f..2ea7c245923e 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -101,9 +101,6 @@ i915-y += dvo_ch7017.o \
# virtual gpu code
i915-y += i915_vgpu.o
-# legacy horrors
-i915-y += i915_dma.o
-
obj-$(CONFIG_DRM_I915) += i915.o
CFLAGS_i915_trace_points.o := -I$(src)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
deleted file mode 100644
index 6992262f9c3c..000000000000
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ /dev/null
@@ -1,1681 +0,0 @@
-/* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
- */
-/*
- * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sub license, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice (including the
- * next paragraph) shall be included in all copies or substantial portions
- * of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
- * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
- * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
- * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
- * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <drm/drmP.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_fb_helper.h>
-#include <drm/drm_legacy.h>
-#include "intel_drv.h"
-#include <drm/i915_drm.h>
-#include "i915_drv.h"
-#include "i915_vgpu.h"
-#include "i915_trace.h"
-#include <linux/pci.h>
-#include <linux/console.h>
-#include <linux/vt.h>
-#include <linux/vgaarb.h>
-#include <linux/acpi.h>
-#include <linux/pnp.h>
-#include <linux/vga_switcheroo.h>
-#include <linux/slab.h>
-#include <acpi/video.h>
-#include <linux/pm.h>
-#include <linux/pm_runtime.h>
-#include <linux/oom.h>
-
-static unsigned int i915_load_fail_count;
-
-bool __i915_inject_load_failure(const char *func, int line)
-{
- if (i915_load_fail_count >= i915.inject_load_failure)
- return false;
-
- if (++i915_load_fail_count == i915.inject_load_failure) {
- DRM_INFO("Injecting failure at checkpoint %u [%s:%d]\n",
- i915.inject_load_failure, func, line);
- return true;
- }
-
- return false;
-}
-
-#define FDO_BUG_URL "https://bugs.freedesktop.org/enter_bug.cgi?product=DRI";
-#define FDO_BUG_MSG "Please file a bug at " FDO_BUG_URL " against DRM/Intel " \
- "providing the dmesg log by booting with drm.debug=0xf"
-
-void
-__i915_printk(struct drm_i915_private *dev_priv, const char *level,
- const char *fmt, ...)
-{
- static bool shown_bug_once;
- struct device *dev = dev_priv->dev->dev;
- bool is_error = level[1] <= KERN_ERR[1];
- bool is_debug = level[1] == KERN_DEBUG[1];
- struct va_format vaf;
- va_list args;
-
- if (is_debug && !(drm_debug & DRM_UT_DRIVER))
- return;
-
- va_start(args, fmt);
-
- vaf.fmt = fmt;
- vaf.va = &args;
-
- dev_printk(level, dev, "[" DRM_NAME ":%ps] %pV",
- __builtin_return_address(0), &vaf);
-
- if (is_error && !shown_bug_once) {
- dev_notice(dev, "%s", FDO_BUG_MSG);
- shown_bug_once = true;
- }
-
- va_end(args);
-}
-
-static bool i915_error_injected(struct drm_i915_private *dev_priv)
-{
- return i915.inject_load_failure &&
- i915_load_fail_count == i915.inject_load_failure;
-}
-
-#define i915_load_error(dev_priv, fmt, ...) \
- __i915_printk(dev_priv, \
- i915_error_injected(dev_priv) ? KERN_DEBUG : KERN_ERR, \
- fmt, ##__VA_ARGS__)
-
-static int i915_getparam(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- drm_i915_getparam_t *param = data;
- int value;
-
- switch (param->param) {
- case I915_PARAM_IRQ_ACTIVE:
- case I915_PARAM_ALLOW_BATCHBUFFER:
- case I915_PARAM_LAST_DISPATCH:
- /* Reject all old ums/dri params. */
- return -ENODEV;
- case I915_PARAM_CHIPSET_ID:
- value = dev->pdev->device;
- break;
- case I915_PARAM_REVISION:
- value = dev->pdev->revision;
- break;
- case I915_PARAM_HAS_GEM:
- value = 1;
- break;
- case I915_PARAM_NUM_FENCES_AVAIL:
- value = dev_priv->num_fence_regs;
- break;
- case I915_PARAM_HAS_OVERLAY:
- value = dev_priv->overlay ? 1 : 0;
- break;
- case I915_PARAM_HAS_PAGEFLIPPING:
- value = 1;
- break;
- case I915_PARAM_HAS_EXECBUF2:
- /* depends on GEM */
- value = 1;
- break;
- case I915_PARAM_HAS_BSD:
- value = intel_engine_initialized(&dev_priv->engine[VCS]);
- break;
- case I915_PARAM_HAS_BLT:
- value = intel_engine_initialized(&dev_priv->engine[BCS]);
- break;
- case I915_PARAM_HAS_VEBOX:
- value = intel_engine_initialized(&dev_priv->engine[VECS]);
- break;
- case I915_PARAM_HAS_BSD2:
- value = intel_engine_initialized(&dev_priv->engine[VCS2]);
- break;
- case I915_PARAM_HAS_RELAXED_FENCING:
- value = 1;
- break;
- case I915_PARAM_HAS_COHERENT_RINGS:
- value = 1;
- break;
- case I915_PARAM_HAS_EXEC_CONSTANTS:
- value = INTEL_INFO(dev)->gen >= 4;
- break;
- case I915_PARAM_HAS_RELAXED_DELTA:
- value = 1;
- break;
- case I915_PARAM_HAS_GEN7_SOL_RESET:
- value = 1;
- break;
- case I915_PARAM_HAS_LLC:
- value = HAS_LLC(dev);
- break;
- case I915_PARAM_HAS_WT:
- value = HAS_WT(dev);
- break;
- case I915_PARAM_HAS_ALIASING_PPGTT:
- value = USES_PPGTT(dev);
- break;
- case I915_PARAM_HAS_WAIT_TIMEOUT:
- value = 1;
- break;
- case I915_PARAM_HAS_SEMAPHORES:
- value = i915_semaphore_is_enabled(dev_priv);
- break;
- case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
- value = 1;
- break;
- case I915_PARAM_HAS_SECURE_BATCHES:
- value = capable(CAP_SYS_ADMIN);
- break;
- case I915_PARAM_HAS_PINNED_BATCHES:
- value = 1;
- break;
- case I915_PARAM_HAS_EXEC_NO_RELOC:
- value = 1;
- break;
- case I915_PARAM_HAS_EXEC_HANDLE_LUT:
- value = 1;
- break;
- case I915_PARAM_CMD_PARSER_VERSION:
- value = i915_cmd_parser_get_version(dev_priv);
- break;
- case I915_PARAM_HAS_COHERENT_PHYS_GTT:
- value = 1;
- break;
- case I915_PARAM_MMAP_VERSION:
- value = 1;
- break;
- case I915_PARAM_SUBSLICE_TOTAL:
- value = INTEL_INFO(dev)->subslice_total;
- if (!value)
- return -ENODEV;
- break;
- case I915_PARAM_EU_TOTAL:
- value = INTEL_INFO(dev)->eu_total;
- if (!value)
- return -ENODEV;
- break;
- case I915_PARAM_HAS_GPU_RESET:
- value = i915.enable_hangcheck && intel_has_gpu_reset(dev_priv);
- break;
- case I915_PARAM_HAS_RESOURCE_STREAMER:
- value = HAS_RESOURCE_STREAMER(dev);
- break;
- case I915_PARAM_HAS_EXEC_SOFTPIN:
- value = 1;
- break;
- default:
- DRM_DEBUG("Unknown parameter %d\n", param->param);
- return -EINVAL;
- }
-
- if (copy_to_user(param->value, &value, sizeof(int))) {
- DRM_ERROR("copy_to_user failed\n");
- return -EFAULT;
- }
-
- return 0;
-}
-
-static int i915_get_bridge_dev(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
- if (!dev_priv->bridge_dev) {
- DRM_ERROR("bridge device not found\n");
- return -1;
- }
- return 0;
-}
-
-/* Allocate space for the MCH regs if needed, return nonzero on error */
-static int
-intel_alloc_mchbar_resource(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
- u32 temp_lo, temp_hi = 0;
- u64 mchbar_addr;
- int ret;
-
- if (INTEL_INFO(dev)->gen >= 4)
- pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
- pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
- mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
-
- /* If ACPI doesn't have it, assume we need to allocate it ourselves */
-#ifdef CONFIG_PNP
- if (mchbar_addr &&
- pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
- return 0;
-#endif
-
- /* Get some space for it */
- dev_priv->mch_res.name = "i915 MCHBAR";
- dev_priv->mch_res.flags = IORESOURCE_MEM;
- ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
- &dev_priv->mch_res,
- MCHBAR_SIZE, MCHBAR_SIZE,
- PCIBIOS_MIN_MEM,
- 0, pcibios_align_resource,
- dev_priv->bridge_dev);
- if (ret) {
- DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
- dev_priv->mch_res.start = 0;
- return ret;
- }
-
- if (INTEL_INFO(dev)->gen >= 4)
- pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
- upper_32_bits(dev_priv->mch_res.start));
-
- pci_write_config_dword(dev_priv->bridge_dev, reg,
- lower_32_bits(dev_priv->mch_res.start));
- return 0;
-}
-
-/* Setup MCHBAR if possible, return true if we should disable it again */
-static void
-intel_setup_mchbar(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
- u32 temp;
- bool enabled;
-
- if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
- return;
-
- dev_priv->mchbar_need_disable = false;
-
- if (IS_I915G(dev) || IS_I915GM(dev)) {
- pci_read_config_dword(dev_priv->bridge_dev, DEVEN, &temp);
- enabled = !!(temp & DEVEN_MCHBAR_EN);
- } else {
- pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
- enabled = temp & 1;
- }
-
- /* If it's already enabled, don't have to do anything */
- if (enabled)
- return;
-
- if (intel_alloc_mchbar_resource(dev))
- return;
-
- dev_priv->mchbar_need_disable = true;
-
- /* Space is allocated or reserved, so enable it. */
- if (IS_I915G(dev) || IS_I915GM(dev)) {
- pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
- temp | DEVEN_MCHBAR_EN);
- } else {
- pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
- pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
- }
-}
-
-static void
-intel_teardown_mchbar(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
-
- if (dev_priv->mchbar_need_disable) {
- if (IS_I915G(dev) || IS_I915GM(dev)) {
- u32 deven_val;
-
- pci_read_config_dword(dev_priv->bridge_dev, DEVEN,
- &deven_val);
- deven_val &= ~DEVEN_MCHBAR_EN;
- pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
- deven_val);
- } else {
- u32 mchbar_val;
-
- pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg,
- &mchbar_val);
- mchbar_val &= ~1;
- pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg,
- mchbar_val);
- }
- }
-
- if (dev_priv->mch_res.start)
- release_resource(&dev_priv->mch_res);
-}
-
-/* true = enable decode, false = disable decoder */
-static unsigned int i915_vga_set_decode(void *cookie, bool state)
-{
- struct drm_device *dev = cookie;
-
- intel_modeset_vga_set_state(dev, state);
- if (state)
- return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
- VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
- else
- return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
-}
-
-static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
- pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
-
- if (state == VGA_SWITCHEROO_ON) {
- pr_info("switched on\n");
- dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
- /* i915 resume handler doesn't set to D0 */
- pci_set_power_state(dev->pdev, PCI_D0);
- i915_resume_switcheroo(dev);
- dev->switch_power_state = DRM_SWITCH_POWER_ON;
- } else {
- pr_info("switched off\n");
- dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
- i915_suspend_switcheroo(dev, pmm);
- dev->switch_power_state = DRM_SWITCH_POWER_OFF;
- }
-}
-
-static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
-
- /*
- * FIXME: open_count is protected by drm_global_mutex but that would lead to
- * locking inversion with the driver load path. And the access here is
- * completely racy anyway. So don't bother with locking for now.
- */
- return dev->open_count == 0;
-}
-
-static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
- .set_gpu_state = i915_switcheroo_set_state,
- .reprobe = NULL,
- .can_switch = i915_switcheroo_can_switch,
-};
-
-static void i915_gem_fini(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = to_i915(dev);
-
- /*
- * Neither the BIOS, ourselves or any other kernel
- * expects the system to be in execlists mode on startup,
- * so we need to reset the GPU back to legacy mode. And the only
- * known way to disable logical contexts is through a GPU reset.
- *
- * So in order to leave the system in a known default configuration,
- * always reset the GPU upon unload. Afterwards we then clean up the
- * GEM state tracking, flushing off the requests and leaving the
- * system in a known idle state.
- *
- * Note that is of the upmost importance that the GPU is idle and
- * all stray writes are flushed *before* we dismantle the backing
- * storage for the pinned objects.
- *
- * However, since we are uncertain that reseting the GPU on older
- * machines is a good idea, we don't - just in case it leaves the
- * machine in an unusable condition.
- */
- if (HAS_HW_CONTEXTS(dev)) {
- int reset = intel_gpu_reset(dev_priv, ALL_ENGINES);
- WARN_ON(reset && reset != -ENODEV);
- }
-
- mutex_lock(&dev->struct_mutex);
- i915_gem_reset(dev);
- i915_gem_cleanup_engines(dev);
- i915_gem_context_fini(dev);
- mutex_unlock(&dev->struct_mutex);
-
- WARN_ON(!list_empty(&to_i915(dev)->context_list));
-}
-
-static int i915_load_modeset_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- int ret;
-
- if (i915_inject_load_failure())
- return -ENODEV;
-
- ret = intel_bios_init(dev_priv);
- if (ret)
- DRM_INFO("failed to find VBIOS tables\n");
-
- /* If we have > 1 VGA cards, then we need to arbitrate access
- * to the common VGA resources.
- *
- * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
- * then we do not take part in VGA arbitration and the
- * vga_client_register() fails with -ENODEV.
- */
- ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
- if (ret && ret != -ENODEV)
- goto out;
-
- intel_register_dsm_handler();
-
- ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops, false);
- if (ret)
- goto cleanup_vga_client;
-
- /* must happen before intel_power_domains_init_hw() on VLV/CHV */
- intel_update_rawclk(dev_priv);
-
- intel_power_domains_init_hw(dev_priv, false);
-
- intel_csr_ucode_init(dev_priv);
-
- ret = intel_irq_install(dev_priv);
- if (ret)
- goto cleanup_csr;
-
- intel_setup_gmbus(dev);
-
- /* Important: The output setup functions called by modeset_init need
- * working irqs for e.g. gmbus and dp aux transfers. */
- intel_modeset_init(dev);
-
- intel_guc_init(dev);
-
- ret = i915_gem_init(dev);
- if (ret)
- goto cleanup_irq;
-
- intel_modeset_gem_init(dev);
-
- if (INTEL_INFO(dev)->num_pipes == 0)
- return 0;
-
- ret = intel_fbdev_init(dev);
- if (ret)
- goto cleanup_gem;
-
- /* Only enable hotplug handling once the fbdev is fully set up. */
- intel_hpd_init(dev_priv);
-
- drm_kms_helper_poll_init(dev);
-
- return 0;
-
-cleanup_gem:
- i915_gem_fini(dev);
-cleanup_irq:
- intel_guc_fini(dev);
- drm_irq_uninstall(dev);
- intel_teardown_gmbus(dev);
-cleanup_csr:
- intel_csr_ucode_fini(dev_priv);
- intel_power_domains_fini(dev_priv);
- vga_switcheroo_unregister_client(dev->pdev);
-cleanup_vga_client:
- vga_client_register(dev->pdev, NULL, NULL, NULL);
-out:
- return ret;
-}
-
-#if IS_ENABLED(CONFIG_FB)
-static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
-{
- struct apertures_struct *ap;
- struct pci_dev *pdev = dev_priv->dev->pdev;
- struct i915_ggtt *ggtt = &dev_priv->ggtt;
- bool primary;
- int ret;
-
- ap = alloc_apertures(1);
- if (!ap)
- return -ENOMEM;
-
- ap->ranges[0].base = ggtt->mappable_base;
- ap->ranges[0].size = ggtt->mappable_end;
-
- primary =
- pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
-
- ret = remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
-
- kfree(ap);
-
- return ret;
-}
-#else
-static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
-{
- return 0;
-}
-#endif
-
-#if !defined(CONFIG_VGA_CONSOLE)
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
- return 0;
-}
-#elif !defined(CONFIG_DUMMY_CONSOLE)
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
- return -ENODEV;
-}
-#else
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
- int ret = 0;
-
- DRM_INFO("Replacing VGA console driver\n");
-
- console_lock();
- if (con_is_bound(&vga_con))
- ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
- if (ret == 0) {
- ret = do_unregister_con_driver(&vga_con);
-
- /* Ignore "already unregistered". */
- if (ret == -ENODEV)
- ret = 0;
- }
- console_unlock();
-
- return ret;
-}
-#endif
-
-static void i915_dump_device_info(struct drm_i915_private *dev_priv)
-{
- const struct intel_device_info *info = &dev_priv->info;
-
-#define PRINT_S(name) "%s"
-#define SEP_EMPTY
-#define PRINT_FLAG(name) info->name ? #name "," : ""
-#define SEP_COMMA ,
- DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
- DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
- info->gen,
- dev_priv->dev->pdev->device,
- dev_priv->dev->pdev->revision,
- DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
-#undef PRINT_S
-#undef SEP_EMPTY
-#undef PRINT_FLAG
-#undef SEP_COMMA
-}
-
-static void cherryview_sseu_info_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_device_info *info;
- u32 fuse, eu_dis;
-
- info = (struct intel_device_info *)&dev_priv->info;
- fuse = I915_READ(CHV_FUSE_GT);
-
- info->slice_total = 1;
-
- if (!(fuse & CHV_FGT_DISABLE_SS0)) {
- info->subslice_per_slice++;
- eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
- CHV_FGT_EU_DIS_SS0_R1_MASK);
- info->eu_total += 8 - hweight32(eu_dis);
- }
-
- if (!(fuse & CHV_FGT_DISABLE_SS1)) {
- info->subslice_per_slice++;
- eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
- CHV_FGT_EU_DIS_SS1_R1_MASK);
- info->eu_total += 8 - hweight32(eu_dis);
- }
-
- info->subslice_total = info->subslice_per_slice;
- /*
- * CHV expected to always have a uniform distribution of EU
- * across subslices.
- */
- info->eu_per_subslice = info->subslice_total ?
- info->eu_total / info->subslice_total :
- 0;
- /*
- * CHV supports subslice power gating on devices with more than
- * one subslice, and supports EU power gating on devices with
- * more than one EU pair per subslice.
- */
- info->has_slice_pg = 0;
- info->has_subslice_pg = (info->subslice_total > 1);
- info->has_eu_pg = (info->eu_per_subslice > 2);
-}
-
-static void gen9_sseu_info_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_device_info *info;
- int s_max = 3, ss_max = 4, eu_max = 8;
- int s, ss;
- u32 fuse2, s_enable, ss_disable, eu_disable;
- u8 eu_mask = 0xff;
-
- info = (struct intel_device_info *)&dev_priv->info;
- fuse2 = I915_READ(GEN8_FUSE2);
- s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
- GEN8_F2_S_ENA_SHIFT;
- ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
- GEN9_F2_SS_DIS_SHIFT;
-
- info->slice_total = hweight32(s_enable);
- /*
- * The subslice disable field is global, i.e. it applies
- * to each of the enabled slices.
- */
- info->subslice_per_slice = ss_max - hweight32(ss_disable);
- info->subslice_total = info->slice_total *
- info->subslice_per_slice;
-
- /*
- * Iterate through enabled slices and subslices to
- * count the total enabled EU.
- */
- for (s = 0; s < s_max; s++) {
- if (!(s_enable & (0x1 << s)))
- /* skip disabled slice */
- continue;
-
- eu_disable = I915_READ(GEN9_EU_DISABLE(s));
- for (ss = 0; ss < ss_max; ss++) {
- int eu_per_ss;
-
- if (ss_disable & (0x1 << ss))
- /* skip disabled subslice */
- continue;
-
- eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
- eu_mask);
-
- /*
- * Record which subslice(s) has(have) 7 EUs. we
- * can tune the hash used to spread work among
- * subslices if they are unbalanced.
- */
- if (eu_per_ss == 7)
- info->subslice_7eu[s] |= 1 << ss;
-
- info->eu_total += eu_per_ss;
- }
- }
-
- /*
- * SKL is expected to always have a uniform distribution
- * of EU across subslices with the exception that any one
- * EU in any one subslice may be fused off for die
- * recovery. BXT is expected to be perfectly uniform in EU
- * distribution.
- */
- info->eu_per_subslice = info->subslice_total ?
- DIV_ROUND_UP(info->eu_total,
- info->subslice_total) : 0;
- /*
- * SKL supports slice power gating on devices with more than
- * one slice, and supports EU power gating on devices with
- * more than one EU pair per subslice. BXT supports subslice
- * power gating on devices with more than one subslice, and
- * supports EU power gating on devices with more than one EU
- * pair per subslice.
- */
- info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
- (info->slice_total > 1));
- info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
- info->has_eu_pg = (info->eu_per_subslice > 2);
-}
-
-static void broadwell_sseu_info_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_device_info *info;
- const int s_max = 3, ss_max = 3, eu_max = 8;
- int s, ss;
- u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
-
- fuse2 = I915_READ(GEN8_FUSE2);
- s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
- ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
-
- eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
- eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
- ((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
- (32 - GEN8_EU_DIS0_S1_SHIFT));
- eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
- ((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
- (32 - GEN8_EU_DIS1_S2_SHIFT));
-
-
- info = (struct intel_device_info *)&dev_priv->info;
- info->slice_total = hweight32(s_enable);
-
- /*
- * The subslice disable field is global, i.e. it applies
- * to each of the enabled slices.
- */
- info->subslice_per_slice = ss_max - hweight32(ss_disable);
- info->subslice_total = info->slice_total * info->subslice_per_slice;
-
- /*
- * Iterate through enabled slices and subslices to
- * count the total enabled EU.
- */
- for (s = 0; s < s_max; s++) {
- if (!(s_enable & (0x1 << s)))
- /* skip disabled slice */
- continue;
-
- for (ss = 0; ss < ss_max; ss++) {
- u32 n_disabled;
-
- if (ss_disable & (0x1 << ss))
- /* skip disabled subslice */
- continue;
-
- n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
-
- /*
- * Record which subslices have 7 EUs.
- */
- if (eu_max - n_disabled == 7)
- info->subslice_7eu[s] |= 1 << ss;
-
- info->eu_total += eu_max - n_disabled;
- }
- }
-
- /*
- * BDW is expected to always have a uniform distribution of EU across
- * subslices with the exception that any one EU in any one subslice may
- * be fused off for die recovery.
- */
- info->eu_per_subslice = info->subslice_total ?
- DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
-
- /*
- * BDW supports slice power gating on devices with more than
- * one slice.
- */
- info->has_slice_pg = (info->slice_total > 1);
- info->has_subslice_pg = 0;
- info->has_eu_pg = 0;
-}
-
-/*
- * Determine various intel_device_info fields at runtime.
- *
- * Use it when either:
- * - it's judged too laborious to fill n static structures with the limit
- * when a simple if statement does the job,
- * - run-time checks (eg read fuse/strap registers) are needed.
- *
- * This function needs to be called:
- * - after the MMIO has been setup as we are reading registers,
- * - after the PCH has been detected,
- * - before the first usage of the fields it can tweak.
- */
-static void intel_device_info_runtime_init(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_device_info *info;
- enum pipe pipe;
-
- info = (struct intel_device_info *)&dev_priv->info;
-
- /*
- * Skylake and Broxton currently don't expose the topmost plane as its
- * use is exclusive with the legacy cursor and we only want to expose
- * one of those, not both. Until we can safely expose the topmost plane
- * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
- * we don't expose the topmost plane at all to prevent ABI breakage
- * down the line.
- */
- if (IS_BROXTON(dev)) {
- info->num_sprites[PIPE_A] = 2;
- info->num_sprites[PIPE_B] = 2;
- info->num_sprites[PIPE_C] = 1;
- } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
- for_each_pipe(dev_priv, pipe)
- info->num_sprites[pipe] = 2;
- else
- for_each_pipe(dev_priv, pipe)
- info->num_sprites[pipe] = 1;
-
- if (i915.disable_display) {
- DRM_INFO("Display disabled (module parameter)\n");
- info->num_pipes = 0;
- } else if (info->num_pipes > 0 &&
- (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
- HAS_PCH_SPLIT(dev)) {
- u32 fuse_strap = I915_READ(FUSE_STRAP);
- u32 sfuse_strap = I915_READ(SFUSE_STRAP);
-
- /*
- * SFUSE_STRAP is supposed to have a bit signalling the display
- * is fused off. Unfortunately it seems that, at least in
- * certain cases, fused off display means that PCH display
- * reads don't land anywhere. In that case, we read 0s.
- *
- * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
- * should be set when taking over after the firmware.
- */
- if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
- sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
- (dev_priv->pch_type == PCH_CPT &&
- !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
- DRM_INFO("Display fused off, disabling\n");
- info->num_pipes = 0;
- } else if (fuse_strap & IVB_PIPE_C_DISABLE) {
- DRM_INFO("PipeC fused off\n");
- info->num_pipes -= 1;
- }
- } else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
- u32 dfsm = I915_READ(SKL_DFSM);
- u8 disabled_mask = 0;
- bool invalid;
- int num_bits;
-
- if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
- disabled_mask |= BIT(PIPE_A);
- if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
- disabled_mask |= BIT(PIPE_B);
- if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
- disabled_mask |= BIT(PIPE_C);
-
- num_bits = hweight8(disabled_mask);
-
- switch (disabled_mask) {
- case BIT(PIPE_A):
- case BIT(PIPE_B):
- case BIT(PIPE_A) | BIT(PIPE_B):
- case BIT(PIPE_A) | BIT(PIPE_C):
- invalid = true;
- break;
- default:
- invalid = false;
- }
-
- if (num_bits > info->num_pipes || invalid)
- DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
- disabled_mask);
- else
- info->num_pipes -= num_bits;
- }
-
- /* Initialize slice/subslice/EU info */
- if (IS_CHERRYVIEW(dev))
- cherryview_sseu_info_init(dev);
- else if (IS_BROADWELL(dev))
- broadwell_sseu_info_init(dev);
- else if (INTEL_INFO(dev)->gen >= 9)
- gen9_sseu_info_init(dev);
-
- info->has_snoop = !info->has_llc;
-
- /* Snooping is broken on BXT A stepping. */
- if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
- info->has_snoop = false;
-
- DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
- DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
- DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
- DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
- DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
- DRM_DEBUG_DRIVER("has slice power gating: %s\n",
- info->has_slice_pg ? "y" : "n");
- DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
- info->has_subslice_pg ? "y" : "n");
- DRM_DEBUG_DRIVER("has EU power gating: %s\n",
- info->has_eu_pg ? "y" : "n");
-
- i915.enable_execlists =
- intel_sanitize_enable_execlists(dev_priv,
- i915.enable_execlists);
-
- /*
- * i915.enable_ppgtt is read-only, so do an early pass to validate the
- * user's requested state against the hardware/driver capabilities. We
- * do this now so that we can print out any log messages once rather
- * than every time we check intel_enable_ppgtt().
- */
- i915.enable_ppgtt =
- intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
- DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
-}
-
-static void intel_init_dpio(struct drm_i915_private *dev_priv)
-{
- /*
- * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
- * CHV x1 PHY (DP/HDMI D)
- * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
- */
- if (IS_CHERRYVIEW(dev_priv)) {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
- DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
- } else if (IS_VALLEYVIEW(dev_priv)) {
- DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
- }
-}
-
-static int i915_workqueues_init(struct drm_i915_private *dev_priv)
-{
- /*
- * The i915 workqueue is primarily used for batched retirement of
- * requests (and thus managing bo) once the task has been completed
- * by the GPU. i915_gem_retire_requests() is called directly when we
- * need high-priority retirement, such as waiting for an explicit
- * bo.
- *
- * It is also used for periodic low-priority events, such as
- * idle-timers and recording error state.
- *
- * All tasks on the workqueue are expected to acquire the dev mutex
- * so there is no point in running more than one instance of the
- * workqueue at any time. Use an ordered one.
- */
- dev_priv->wq = alloc_ordered_workqueue("i915", 0);
- if (dev_priv->wq == NULL)
- goto out_err;
-
- dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0);
- if (dev_priv->hotplug.dp_wq == NULL)
- goto out_free_wq;
-
- dev_priv->gpu_error.hangcheck_wq =
- alloc_ordered_workqueue("i915-hangcheck", 0);
- if (dev_priv->gpu_error.hangcheck_wq == NULL)
- goto out_free_dp_wq;
-
- return 0;
-
-out_free_dp_wq:
- destroy_workqueue(dev_priv->hotplug.dp_wq);
-out_free_wq:
- destroy_workqueue(dev_priv->wq);
-out_err:
- DRM_ERROR("Failed to allocate workqueues.\n");
-
- return -ENOMEM;
-}
-
-static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
-{
- destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
- destroy_workqueue(dev_priv->hotplug.dp_wq);
- destroy_workqueue(dev_priv->wq);
-}
-
-/**
- * i915_driver_init_early - setup state not requiring device access
- * @dev_priv: device private
- *
- * Initialize everything that is a "SW-only" state, that is state not
- * requiring accessing the device or exposing the driver via kernel internal
- * or userspace interfaces. Example steps belonging here: lock initialization,
- * system memory allocation, setting up device specific attributes and
- * function hooks not requiring accessing the device.
- */
-static int i915_driver_init_early(struct drm_i915_private *dev_priv,
- const struct pci_device_id *ent)
-{
- const struct intel_device_info *match_info =
- (struct intel_device_info *)ent->driver_data;
- struct intel_device_info *device_info;
- int ret = 0;
-
- if (i915_inject_load_failure())
- return -ENODEV;
-
- /* Setup the write-once "constant" device info */
- device_info = (struct intel_device_info *)&dev_priv->info;
- memcpy(device_info, match_info, sizeof(*device_info));
- device_info->device_id = dev_priv->drm.pdev->device;
-
- BUG_ON(device_info->gen > sizeof(device_info->gen_mask) * BITS_PER_BYTE);
- device_info->gen_mask = BIT(device_info->gen - 1);
-
- spin_lock_init(&dev_priv->irq_lock);
- spin_lock_init(&dev_priv->gpu_error.lock);
- mutex_init(&dev_priv->backlight_lock);
- spin_lock_init(&dev_priv->uncore.lock);
- spin_lock_init(&dev_priv->mm.object_stat_lock);
- spin_lock_init(&dev_priv->mmio_flip_lock);
- mutex_init(&dev_priv->sb_lock);
- mutex_init(&dev_priv->modeset_restore_lock);
- mutex_init(&dev_priv->av_mutex);
- mutex_init(&dev_priv->wm.wm_mutex);
- mutex_init(&dev_priv->pps_mutex);
-
- ret = i915_workqueues_init(dev_priv);
- if (ret < 0)
- return ret;
-
- /* This must be called before any calls to HAS_PCH_* */
- intel_detect_pch(&dev_priv->drm);
-
- intel_pm_setup(&dev_priv->drm);
- intel_init_dpio(dev_priv);
- intel_power_domains_init(dev_priv);
- intel_irq_init(dev_priv);
- intel_init_display_hooks(dev_priv);
- intel_init_clock_gating_hooks(dev_priv);
- intel_init_audio_hooks(dev_priv);
- i915_gem_load_init(&dev_priv->drm);
-
- intel_display_crc_init(&dev_priv->drm);
-
- i915_dump_device_info(dev_priv);
-
- /* Not all pre-production machines fall into this category, only the
- * very first ones. Almost everything should work, except for maybe
- * suspend/resume. And we don't implement workarounds that affect only
- * pre-production machines. */
- if (IS_HSW_EARLY_SDV(dev_priv))
- DRM_INFO("This is an early pre-production Haswell machine. "
- "It may not be fully functional.\n");
-
- return 0;
-}
-
-/**
- * i915_driver_cleanup_early - cleanup the setup done in i915_driver_init_early()
- * @dev_priv: device private
- */
-static void i915_driver_cleanup_early(struct drm_i915_private *dev_priv)
-{
- i915_gem_load_cleanup(dev_priv->dev);
- i915_workqueues_cleanup(dev_priv);
-}
-
-static int i915_mmio_setup(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = to_i915(dev);
- int mmio_bar;
- int mmio_size;
-
- mmio_bar = IS_GEN2(dev) ? 1 : 0;
- /*
- * Before gen4, the registers and the GTT are behind different BARs.
- * However, from gen4 onwards, the registers and the GTT are shared
- * in the same BAR, so we want to restrict this ioremap from
- * clobbering the GTT which we want ioremap_wc instead. Fortunately,
- * the register BAR remains the same size for all the earlier
- * generations up to Ironlake.
- */
- if (INTEL_INFO(dev)->gen < 5)
- mmio_size = 512 * 1024;
- else
- mmio_size = 2 * 1024 * 1024;
- dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size);
- if (dev_priv->regs == NULL) {
- DRM_ERROR("failed to map registers\n");
-
- return -EIO;
- }
-
- /* Try to make sure MCHBAR is enabled before poking at it */
- intel_setup_mchbar(dev);
-
- return 0;
-}
-
-static void i915_mmio_cleanup(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = to_i915(dev);
-
- intel_teardown_mchbar(dev);
- pci_iounmap(dev->pdev, dev_priv->regs);
-}
-
-/**
- * i915_driver_init_mmio - setup device MMIO
- * @dev_priv: device private
- *
- * Setup minimal device state necessary for MMIO accesses later in the
- * initialization sequence. The setup here should avoid any other device-wide
- * side effects or exposing the driver via kernel internal or user space
- * interfaces.
- */
-static int i915_driver_init_mmio(struct drm_i915_private *dev_priv)
-{
- struct drm_device *dev = dev_priv->dev;
- int ret;
-
- if (i915_inject_load_failure())
- return -ENODEV;
-
- if (i915_get_bridge_dev(dev))
- return -EIO;
-
- ret = i915_mmio_setup(dev);
- if (ret < 0)
- goto put_bridge;
-
- intel_uncore_init(dev_priv);
-
- return 0;
-
-put_bridge:
- pci_dev_put(dev_priv->bridge_dev);
-
- return ret;
-}
-
-/**
- * i915_driver_cleanup_mmio - cleanup the setup done in i915_driver_init_mmio()
- * @dev_priv: device private
- */
-static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
-{
- struct drm_device *dev = dev_priv->dev;
-
- intel_uncore_fini(dev_priv);
- i915_mmio_cleanup(dev);
- pci_dev_put(dev_priv->bridge_dev);
-}
-
-/**
- * i915_driver_init_hw - setup state requiring device access
- * @dev_priv: device private
- *
- * Setup state that requires accessing the device, but doesn't require
- * exposing the driver via kernel internal or userspace interfaces.
- */
-static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
-{
- struct drm_device *dev = dev_priv->dev;
- struct i915_ggtt *ggtt = &dev_priv->ggtt;
- uint32_t aperture_size;
- int ret;
-
- if (i915_inject_load_failure())
- return -ENODEV;
-
- intel_device_info_runtime_init(dev);
-
- ret = i915_ggtt_init_hw(dev);
- if (ret)
- return ret;
-
- ret = i915_ggtt_enable_hw(dev);
- if (ret) {
- DRM_ERROR("failed to enable GGTT\n");
- goto out_ggtt;
- }
-
- /* WARNING: Apparently we must kick fbdev drivers before vgacon,
- * otherwise the vga fbdev driver falls over. */
- ret = i915_kick_out_firmware_fb(dev_priv);
- if (ret) {
- DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
- goto out_ggtt;
- }
-
- ret = i915_kick_out_vgacon(dev_priv);
- if (ret) {
- DRM_ERROR("failed to remove conflicting VGA console\n");
- goto out_ggtt;
- }
-
- pci_set_master(dev->pdev);
-
- /* overlay on gen2 is broken and can't address above 1G */
- if (IS_GEN2(dev)) {
- ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
- if (ret) {
- DRM_ERROR("failed to set DMA mask\n");
-
- goto out_ggtt;
- }
- }
-
-
- /* 965GM sometimes incorrectly writes to hardware status page (HWS)
- * using 32bit addressing, overwriting memory if HWS is located
- * above 4GB.
- *
- * The documentation also mentions an issue with undefined
- * behaviour if any general state is accessed within a page above 4GB,
- * which also needs to be handled carefully.
- */
- if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) {
- ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
-
- if (ret) {
- DRM_ERROR("failed to set DMA mask\n");
-
- goto out_ggtt;
- }
- }
-
- aperture_size = ggtt->mappable_end;
-
- ggtt->mappable =
- io_mapping_create_wc(ggtt->mappable_base,
- aperture_size);
- if (!ggtt->mappable) {
- ret = -EIO;
- goto out_ggtt;
- }
-
- ggtt->mtrr = arch_phys_wc_add(ggtt->mappable_base,
- aperture_size);
-
- pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY,
- PM_QOS_DEFAULT_VALUE);
-
- intel_uncore_sanitize(dev_priv);
-
- intel_opregion_setup(dev_priv);
-
- i915_gem_load_init_fences(dev_priv);
-
- /* On the 945G/GM, the chipset reports the MSI capability on the
- * integrated graphics even though the support isn't actually there
- * according to the published specs. It doesn't appear to function
- * correctly in testing on 945G.
- * This may be a side effect of MSI having been made available for PEG
- * and the registers being closely associated.
- *
- * According to chipset errata, on the 965GM, MSI interrupts may
- * be lost or delayed, but we use them anyways to avoid
- * stuck interrupts on some machines.
- */
- if (!IS_I945G(dev) && !IS_I945GM(dev)) {
- if (pci_enable_msi(dev->pdev) < 0)
- DRM_DEBUG_DRIVER("can't enable MSI");
- }
-
- return 0;
-
-out_ggtt:
- i915_ggtt_cleanup_hw(dev);
-
- return ret;
-}
-
-/**
- * i915_driver_cleanup_hw - cleanup the setup done in i915_driver_init_hw()
- * @dev_priv: device private
- */
-static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv)
-{
- struct drm_device *dev = dev_priv->dev;
- struct i915_ggtt *ggtt = &dev_priv->ggtt;
-
- if (dev->pdev->msi_enabled)
- pci_disable_msi(dev->pdev);
-
- pm_qos_remove_request(&dev_priv->pm_qos);
- arch_phys_wc_del(ggtt->mtrr);
- io_mapping_free(ggtt->mappable);
- i915_ggtt_cleanup_hw(dev);
-}
-
-/**
- * i915_driver_register - register the driver with the rest of the system
- * @dev_priv: device private
- *
- * Perform any steps necessary to make the driver available via kernel
- * internal or userspace interfaces.
- */
-static void i915_driver_register(struct drm_i915_private *dev_priv)
-{
- struct drm_device *dev = dev_priv->dev;
-
- i915_gem_shrinker_init(dev_priv);
-
- /*
- * Notify a valid surface after modesetting,
- * when running inside a VM.
- */
- if (intel_vgpu_active(dev_priv))
- I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
-
- /* Reveal our presence to userspace */
- if (drm_dev_register(dev, 0) == 0) {
- i915_debugfs_register(dev_priv);
- i915_setup_sysfs(dev);
- intel_modeset_register(dev_priv);
- } else
- DRM_ERROR("Failed to register driver for userspace access!\n");
-
- if (INTEL_INFO(dev_priv)->num_pipes) {
- /* Must be done after probing outputs */
- intel_opregion_register(dev_priv);
- acpi_video_register();
- }
-
- if (IS_GEN5(dev_priv))
- intel_gpu_ips_init(dev_priv);
-
- i915_audio_component_init(dev_priv);
-
- /*
- * Some ports require correctly set-up hpd registers for detection to
- * work properly (leading to ghost connected connector status), e.g. VGA
- * on gm45. Hence we can only set up the initial fbdev config after hpd
- * irqs are fully enabled. Now we should scan for the initial config
- * only once hotplug handling is enabled, but due to screwed-up locking
- * around kms/fbdev init we can't protect the fdbev initial config
- * scanning against hotplug events. Hence do this first and ignore the
- * tiny window where we will loose hotplug notifactions.
- */
- intel_fbdev_initial_config_async(dev);
-}
-
-/**
- * i915_driver_unregister - cleanup the registration done in i915_driver_regiser()
- * @dev_priv: device private
- */
-static void i915_driver_unregister(struct drm_i915_private *dev_priv)
-{
- i915_audio_component_cleanup(dev_priv);
-
- intel_gpu_ips_teardown();
- acpi_video_unregister();
- intel_opregion_unregister(dev_priv);
-
- intel_modeset_unregister(dev_priv);
- i915_teardown_sysfs(dev_priv->dev);
- i915_debugfs_unregister(dev_priv);
- drm_dev_unregister(dev_priv->dev);
-
- i915_gem_shrinker_cleanup(dev_priv);
-}
-
-/**
- * i915_driver_load - setup chip and create an initial config
- * @dev: DRM device
- * @flags: startup flags
- *
- * The driver load routine has to do several things:
- * - drive output discovery via intel_modeset_init()
- * - initialize the memory manager
- * - allocate initial config memory
- * - setup the DRM framebuffer with the allocated memory
- */
-int i915_driver_load(struct pci_dev *pdev,
- const struct pci_device_id *ent,
- struct drm_driver *driver)
-{
- struct drm_i915_private *dev_priv;
- int ret;
-
- dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
- if (dev_priv == NULL)
- return -ENOMEM;
-
- ret = drm_dev_init(&dev_priv->drm, driver, &pdev->dev);
- if (ret) {
- kfree(dev_priv);
- goto out;
- }
-
- /* Must be set before calling __i915_printk */
- dev_priv->drm.pdev = pdev;
- dev_priv->drm.dev_private = dev_priv;
- dev_priv->dev = &dev_priv->drm;
-
- ret = pci_enable_device(pdev);
- if (ret)
- goto out_free_priv;
-
- pci_set_drvdata(pdev, &dev_priv->drm);
-
- ret = i915_driver_init_early(dev_priv, ent);
- if (ret < 0)
- goto out_pci_disable;
-
- intel_runtime_pm_get(dev_priv);
-
- ret = i915_driver_init_mmio(dev_priv);
- if (ret < 0)
- goto out_runtime_pm_put;
-
- ret = i915_driver_init_hw(dev_priv);
- if (ret < 0)
- goto out_cleanup_mmio;
-
- /*
- * TODO: move the vblank init and parts of modeset init steps into one
- * of the i915_driver_init_/i915_driver_register functions according
- * to the role/effect of the given init step.
- */
- if (INTEL_INFO(dev_priv)->num_pipes) {
- ret = drm_vblank_init(dev_priv->dev,
- INTEL_INFO(dev_priv)->num_pipes);
- if (ret)
- goto out_cleanup_hw;
- }
-
- ret = i915_load_modeset_init(dev_priv->dev);
- if (ret < 0)
- goto out_cleanup_vblank;
-
- i915_driver_register(dev_priv);
-
- intel_runtime_pm_enable(dev_priv);
-
- intel_runtime_pm_put(dev_priv);
-
- return 0;
-
-out_cleanup_vblank:
- drm_vblank_cleanup(dev_priv->dev);
-out_cleanup_hw:
- i915_driver_cleanup_hw(dev_priv);
-out_cleanup_mmio:
- i915_driver_cleanup_mmio(dev_priv);
-out_runtime_pm_put:
- intel_runtime_pm_put(dev_priv);
- i915_driver_cleanup_early(dev_priv);
-out_pci_disable:
- pci_disable_device(pdev);
-out_free_priv:
- drm_dev_unref(&dev_priv->drm);
-out:
- i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret);
- return ret;
-}
-
-int i915_driver_unload(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- int ret;
-
- intel_fbdev_fini(dev);
-
- ret = i915_gem_suspend(dev);
- if (ret) {
- DRM_ERROR("failed to idle hardware: %d\n", ret);
- return ret;
- }
-
- intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
-
- i915_driver_unregister(dev_priv);
-
- drm_vblank_cleanup(dev);
-
- intel_modeset_cleanup(dev);
-
- /*
- * free the memory space allocated for the child device
- * config parsed from VBT
- */
- if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) {
- kfree(dev_priv->vbt.child_dev);
- dev_priv->vbt.child_dev = NULL;
- dev_priv->vbt.child_dev_num = 0;
- }
- kfree(dev_priv->vbt.sdvo_lvds_vbt_mode);
- dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
- kfree(dev_priv->vbt.lfp_lvds_vbt_mode);
- dev_priv->vbt.lfp_lvds_vbt_mode = NULL;
-
- vga_switcheroo_unregister_client(dev->pdev);
- vga_client_register(dev->pdev, NULL, NULL, NULL);
-
- intel_csr_ucode_fini(dev_priv);
-
- /* Free error state after interrupts are fully disabled. */
- cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
- i915_destroy_error_state(dev);
-
- /* Flush any outstanding unpin_work. */
- flush_workqueue(dev_priv->wq);
-
- intel_guc_fini(dev);
- i915_gem_fini(dev);
- intel_fbc_cleanup_cfb(dev_priv);
-
- intel_power_domains_fini(dev_priv);
-
- i915_driver_cleanup_hw(dev_priv);
- i915_driver_cleanup_mmio(dev_priv);
-
- intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
-
- i915_driver_cleanup_early(dev_priv);
-
- return 0;
-}
-
-int i915_driver_open(struct drm_device *dev, struct drm_file *file)
-{
- int ret;
-
- ret = i915_gem_open(dev, file);
- if (ret)
- return ret;
-
- return 0;
-}
-
-/**
- * i915_driver_lastclose - clean up after all DRM clients have exited
- * @dev: DRM device
- *
- * Take care of cleaning up after all DRM clients have exited. In the
- * mode setting case, we want to restore the kernel's initial mode (just
- * in case the last client left us in a bad state).
- *
- * Additionally, in the non-mode setting case, we'll tear down the GTT
- * and DMA structures, since the kernel won't be using them, and clea
- * up any GEM state.
- */
-void i915_driver_lastclose(struct drm_device *dev)
-{
- intel_fbdev_restore_mode(dev);
- vga_switcheroo_process_delayed_switch();
-}
-
-void i915_driver_preclose(struct drm_device *dev, struct drm_file *file)
-{
- mutex_lock(&dev->struct_mutex);
- i915_gem_context_close(dev, file);
- i915_gem_release(dev, file);
- mutex_unlock(&dev->struct_mutex);
-}
-
-void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
-{
- struct drm_i915_file_private *file_priv = file->driver_priv;
-
- kfree(file_priv);
-}
-
-static int
-i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data,
- struct drm_file *file)
-{
- return -ENODEV;
-}
-
-const struct drm_ioctl_desc i915_ioctls[] = {
- DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH|DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
- DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
- DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_gem_context_reset_stats_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW),
-};
-
-int i915_max_ioctl = ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index b13d6751ebe4..3ae313a86f46 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -27,21 +27,30 @@
*
*/
-#include <linux/device.h>
#include <linux/acpi.h>
-#include <drm/drmP.h>
-#include <drm/i915_drm.h>
-#include "i915_drv.h"
-#include "i915_trace.h"
-#include "intel_drv.h"
-
#include <linux/apple-gmux.h>
#include <linux/console.h>
+#include <linux/device.h>
+#include <linux/oom.h>
#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/pnp.h>
+#include <linux/slab.h>
#include <linux/vgaarb.h>
#include <linux/vga_switcheroo.h>
+#include <linux/vt.h>
+#include <acpi/video.h>
+
+#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/i915_drm.h>
+
+#include "i915_drv.h"
+#include "i915_trace.h"
+#include "i915_vgpu.h"
+#include "intel_drv.h"
static struct drm_driver driver;
@@ -323,236 +332,1801 @@ static const struct intel_device_info intel_broadwell_gt3m_info = {
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
};
-static const struct intel_device_info intel_cherryview_info = {
- .gen = 8, .num_pipes = 3,
- .need_gfx_hws = 1, .has_hotplug = 1,
- .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
- .is_cherryview = 1,
- .display_mmio_offset = VLV_DISPLAY_BASE,
- GEN_CHV_PIPEOFFSETS,
- CURSOR_OFFSETS,
- CHV_COLORS,
-};
+static const struct intel_device_info intel_cherryview_info = {
+ .gen = 8, .num_pipes = 3,
+ .need_gfx_hws = 1, .has_hotplug = 1,
+ .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+ .is_cherryview = 1,
+ .display_mmio_offset = VLV_DISPLAY_BASE,
+ GEN_CHV_PIPEOFFSETS,
+ CURSOR_OFFSETS,
+ CHV_COLORS,
+};
+
+static const struct intel_device_info intel_skylake_info = {
+ BDW_FEATURES,
+ .is_skylake = 1,
+ .gen = 9,
+};
+
+static const struct intel_device_info intel_skylake_gt3_info = {
+ BDW_FEATURES,
+ .is_skylake = 1,
+ .gen = 9,
+ .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+static const struct intel_device_info intel_broxton_info = {
+ .is_preliminary = 1,
+ .is_broxton = 1,
+ .gen = 9,
+ .need_gfx_hws = 1, .has_hotplug = 1,
+ .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+ .num_pipes = 3,
+ .has_ddi = 1,
+ .has_fpga_dbg = 1,
+ .has_fbc = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
+ IVB_CURSOR_OFFSETS,
+ BDW_COLORS,
+};
+
+static const struct intel_device_info intel_kabylake_info = {
+ BDW_FEATURES,
+ .is_kabylake = 1,
+ .gen = 9,
+};
+
+static const struct intel_device_info intel_kabylake_gt3_info = {
+ BDW_FEATURES,
+ .is_kabylake = 1,
+ .gen = 9,
+ .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+};
+
+/*
+ * Make sure any device matches here are from most specific to most
+ * general. For example, since the Quanta match is based on the subsystem
+ * and subvendor IDs, we need it to come before the more general IVB
+ * PCI ID matches, otherwise we'll use the wrong info struct above.
+ */
+static const struct pci_device_id pciidlist[] = {
+ INTEL_I830_IDS(&intel_i830_info),
+ INTEL_I845G_IDS(&intel_845g_info),
+ INTEL_I85X_IDS(&intel_i85x_info),
+ INTEL_I865G_IDS(&intel_i865g_info),
+ INTEL_I915G_IDS(&intel_i915g_info),
+ INTEL_I915GM_IDS(&intel_i915gm_info),
+ INTEL_I945G_IDS(&intel_i945g_info),
+ INTEL_I945GM_IDS(&intel_i945gm_info),
+ INTEL_I965G_IDS(&intel_i965g_info),
+ INTEL_G33_IDS(&intel_g33_info),
+ INTEL_I965GM_IDS(&intel_i965gm_info),
+ INTEL_GM45_IDS(&intel_gm45_info),
+ INTEL_G45_IDS(&intel_g45_info),
+ INTEL_PINEVIEW_IDS(&intel_pineview_info),
+ INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),
+ INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),
+ INTEL_SNB_D_IDS(&intel_sandybridge_d_info),
+ INTEL_SNB_M_IDS(&intel_sandybridge_m_info),
+ INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */
+ INTEL_IVB_M_IDS(&intel_ivybridge_m_info),
+ INTEL_IVB_D_IDS(&intel_ivybridge_d_info),
+ INTEL_HSW_D_IDS(&intel_haswell_d_info),
+ INTEL_HSW_M_IDS(&intel_haswell_m_info),
+ INTEL_VLV_M_IDS(&intel_valleyview_m_info),
+ INTEL_VLV_D_IDS(&intel_valleyview_d_info),
+ INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info),
+ INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),
+ INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),
+ INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info),
+ INTEL_CHV_IDS(&intel_cherryview_info),
+ INTEL_SKL_GT1_IDS(&intel_skylake_info),
+ INTEL_SKL_GT2_IDS(&intel_skylake_info),
+ INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info),
+ INTEL_SKL_GT4_IDS(&intel_skylake_gt3_info),
+ INTEL_BXT_IDS(&intel_broxton_info),
+ INTEL_KBL_GT1_IDS(&intel_kabylake_info),
+ INTEL_KBL_GT2_IDS(&intel_kabylake_info),
+ INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info),
+ INTEL_KBL_GT4_IDS(&intel_kabylake_gt3_info),
+ {0, 0, 0}
+};
+MODULE_DEVICE_TABLE(pci, pciidlist);
+
+static unsigned int i915_load_fail_count;
+
+bool __i915_inject_load_failure(const char *func, int line)
+{
+ if (i915_load_fail_count >= i915.inject_load_failure)
+ return false;
+
+ if (++i915_load_fail_count == i915.inject_load_failure) {
+ DRM_INFO("Injecting failure at checkpoint %u [%s:%d]\n",
+ i915.inject_load_failure, func, line);
+ return true;
+ }
+
+ return false;
+}
+
+#define FDO_BUG_URL "https://bugs.freedesktop.org/enter_bug.cgi?product=DRI";
+#define FDO_BUG_MSG "Please file a bug at " FDO_BUG_URL " against DRM/Intel " \
+ "providing the dmesg log by booting with drm.debug=0xf"
+
+void
+__i915_printk(struct drm_i915_private *dev_priv, const char *level,
+ const char *fmt, ...)
+{
+ static bool shown_bug_once;
+ struct device *dev = dev_priv->dev->dev;
+ bool is_error = level[1] <= KERN_ERR[1];
+ bool is_debug = level[1] == KERN_DEBUG[1];
+ struct va_format vaf;
+ va_list args;
+
+ if (is_debug && !(drm_debug & DRM_UT_DRIVER))
+ return;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ dev_printk(level, dev, "[" DRM_NAME ":%ps] %pV",
+ __builtin_return_address(0), &vaf);
+
+ if (is_error && !shown_bug_once) {
+ dev_notice(dev, "%s", FDO_BUG_MSG);
+ shown_bug_once = true;
+ }
+
+ va_end(args);
+}
+
+static bool i915_error_injected(struct drm_i915_private *dev_priv)
+{
+ return i915.inject_load_failure &&
+ i915_load_fail_count == i915.inject_load_failure;
+}
+
+#define i915_load_error(dev_priv, fmt, ...) \
+ __i915_printk(dev_priv, \
+ i915_error_injected(dev_priv) ? KERN_DEBUG : KERN_ERR, \
+ fmt, ##__VA_ARGS__)
+
+
+static enum intel_pch intel_virt_detect_pch(struct drm_device *dev)
+{
+ enum intel_pch ret = PCH_NOP;
+
+ /*
+ * In a virtualized passthrough environment we can be in a
+ * setup where the ISA bridge is not able to be passed through.
+ * In this case, a south bridge can be emulated and we have to
+ * make an educated guess as to which PCH is really there.
+ */
+
+ if (IS_GEN5(dev)) {
+ ret = PCH_IBX;
+ DRM_DEBUG_KMS("Assuming Ibex Peak PCH\n");
+ } else if (IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
+ ret = PCH_CPT;
+ DRM_DEBUG_KMS("Assuming CouarPoint PCH\n");
+ } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
+ ret = PCH_LPT;
+ DRM_DEBUG_KMS("Assuming LynxPoint PCH\n");
+ } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
+ ret = PCH_SPT;
+ DRM_DEBUG_KMS("Assuming SunrisePoint PCH\n");
+ }
+
+ return ret;
+}
+
+static void intel_detect_pch(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct pci_dev *pch = NULL;
+
+ /* In all current cases, num_pipes is equivalent to the PCH_NOP setting
+ * (which really amounts to a PCH but no South Display).
+ */
+ if (INTEL_INFO(dev)->num_pipes == 0) {
+ dev_priv->pch_type = PCH_NOP;
+ return;
+ }
+
+ /*
+ * The reason to probe ISA bridge instead of Dev31:Fun0 is to
+ * make graphics device passthrough work easy for VMM, that only
+ * need to expose ISA bridge to let driver know the real hardware
+ * underneath. This is a requirement from virtualization team.
+ *
+ * In some virtualized environments (e.g. XEN), there is irrelevant
+ * ISA bridge in the system. To work reliably, we should scan trhough
+ * all the ISA bridge devices and check for the first match, instead
+ * of only checking the first one.
+ */
+ while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
+ if (pch->vendor == PCI_VENDOR_ID_INTEL) {
+ unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
+ dev_priv->pch_id = id;
+
+ if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
+ dev_priv->pch_type = PCH_IBX;
+ DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
+ WARN_ON(!IS_GEN5(dev));
+ } else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
+ dev_priv->pch_type = PCH_CPT;
+ DRM_DEBUG_KMS("Found CougarPoint PCH\n");
+ WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
+ } else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
+ /* PantherPoint is CPT compatible */
+ dev_priv->pch_type = PCH_CPT;
+ DRM_DEBUG_KMS("Found PantherPoint PCH\n");
+ WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
+ } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
+ dev_priv->pch_type = PCH_LPT;
+ DRM_DEBUG_KMS("Found LynxPoint PCH\n");
+ WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
+ WARN_ON(IS_HSW_ULT(dev) || IS_BDW_ULT(dev));
+ } else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
+ dev_priv->pch_type = PCH_LPT;
+ DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
+ WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
+ WARN_ON(!IS_HSW_ULT(dev) && !IS_BDW_ULT(dev));
+ } else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
+ dev_priv->pch_type = PCH_SPT;
+ DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
+ WARN_ON(!IS_SKYLAKE(dev) &&
+ !IS_KABYLAKE(dev));
+ } else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
+ dev_priv->pch_type = PCH_SPT;
+ DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
+ WARN_ON(!IS_SKYLAKE(dev) &&
+ !IS_KABYLAKE(dev));
+ } else if ((id == INTEL_PCH_P2X_DEVICE_ID_TYPE) ||
+ (id == INTEL_PCH_P3X_DEVICE_ID_TYPE) ||
+ ((id == INTEL_PCH_QEMU_DEVICE_ID_TYPE) &&
+ pch->subsystem_vendor == 0x1af4 &&
+ pch->subsystem_device == 0x1100)) {
+ dev_priv->pch_type = intel_virt_detect_pch(dev);
+ } else
+ continue;
+
+ break;
+ }
+ }
+ if (!pch)
+ DRM_DEBUG_KMS("No PCH found.\n");
+
+ pci_dev_put(pch);
+}
+
+bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv)
+{
+ if (INTEL_GEN(dev_priv) < 6)
+ return false;
+
+ if (i915.semaphores >= 0)
+ return i915.semaphores;
+
+ /* TODO: make semaphores and Execlists play nicely together */
+ if (i915.enable_execlists)
+ return false;
+
+#ifdef CONFIG_INTEL_IOMMU
+ /* Enable semaphores on SNB when IO remapping is off */
+ if (IS_GEN6(dev_priv) && intel_iommu_gfx_mapped)
+ return false;
+#endif
+
+ return true;
+}
+
+static int i915_getparam(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ drm_i915_getparam_t *param = data;
+ int value;
+
+ switch (param->param) {
+ case I915_PARAM_IRQ_ACTIVE:
+ case I915_PARAM_ALLOW_BATCHBUFFER:
+ case I915_PARAM_LAST_DISPATCH:
+ /* Reject all old ums/dri params. */
+ return -ENODEV;
+ case I915_PARAM_CHIPSET_ID:
+ value = dev->pdev->device;
+ break;
+ case I915_PARAM_REVISION:
+ value = dev->pdev->revision;
+ break;
+ case I915_PARAM_HAS_GEM:
+ value = 1;
+ break;
+ case I915_PARAM_NUM_FENCES_AVAIL:
+ value = dev_priv->num_fence_regs;
+ break;
+ case I915_PARAM_HAS_OVERLAY:
+ value = dev_priv->overlay ? 1 : 0;
+ break;
+ case I915_PARAM_HAS_PAGEFLIPPING:
+ value = 1;
+ break;
+ case I915_PARAM_HAS_EXECBUF2:
+ /* depends on GEM */
+ value = 1;
+ break;
+ case I915_PARAM_HAS_BSD:
+ value = intel_engine_initialized(&dev_priv->engine[VCS]);
+ break;
+ case I915_PARAM_HAS_BLT:
+ value = intel_engine_initialized(&dev_priv->engine[BCS]);
+ break;
+ case I915_PARAM_HAS_VEBOX:
+ value = intel_engine_initialized(&dev_priv->engine[VECS]);
+ break;
+ case I915_PARAM_HAS_BSD2:
+ value = intel_engine_initialized(&dev_priv->engine[VCS2]);
+ break;
+ case I915_PARAM_HAS_RELAXED_FENCING:
+ value = 1;
+ break;
+ case I915_PARAM_HAS_COHERENT_RINGS:
+ value = 1;
+ break;
+ case I915_PARAM_HAS_EXEC_CONSTANTS:
+ value = INTEL_INFO(dev)->gen >= 4;
+ break;
+ case I915_PARAM_HAS_RELAXED_DELTA:
+ value = 1;
+ break;
+ case I915_PARAM_HAS_GEN7_SOL_RESET:
+ value = 1;
+ break;
+ case I915_PARAM_HAS_LLC:
+ value = HAS_LLC(dev);
+ break;
+ case I915_PARAM_HAS_WT:
+ value = HAS_WT(dev);
+ break;
+ case I915_PARAM_HAS_ALIASING_PPGTT:
+ value = USES_PPGTT(dev);
+ break;
+ case I915_PARAM_HAS_WAIT_TIMEOUT:
+ value = 1;
+ break;
+ case I915_PARAM_HAS_SEMAPHORES:
+ value = i915_semaphore_is_enabled(dev_priv);
+ break;
+ case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
+ value = 1;
+ break;
+ case I915_PARAM_HAS_SECURE_BATCHES:
+ value = capable(CAP_SYS_ADMIN);
+ break;
+ case I915_PARAM_HAS_PINNED_BATCHES:
+ value = 1;
+ break;
+ case I915_PARAM_HAS_EXEC_NO_RELOC:
+ value = 1;
+ break;
+ case I915_PARAM_HAS_EXEC_HANDLE_LUT:
+ value = 1;
+ break;
+ case I915_PARAM_CMD_PARSER_VERSION:
+ value = i915_cmd_parser_get_version(dev_priv);
+ break;
+ case I915_PARAM_HAS_COHERENT_PHYS_GTT:
+ value = 1;
+ break;
+ case I915_PARAM_MMAP_VERSION:
+ value = 1;
+ break;
+ case I915_PARAM_SUBSLICE_TOTAL:
+ value = INTEL_INFO(dev)->subslice_total;
+ if (!value)
+ return -ENODEV;
+ break;
+ case I915_PARAM_EU_TOTAL:
+ value = INTEL_INFO(dev)->eu_total;
+ if (!value)
+ return -ENODEV;
+ break;
+ case I915_PARAM_HAS_GPU_RESET:
+ value = i915.enable_hangcheck && intel_has_gpu_reset(dev_priv);
+ break;
+ case I915_PARAM_HAS_RESOURCE_STREAMER:
+ value = HAS_RESOURCE_STREAMER(dev);
+ break;
+ case I915_PARAM_HAS_EXEC_SOFTPIN:
+ value = 1;
+ break;
+ default:
+ DRM_DEBUG("Unknown parameter %d\n", param->param);
+ return -EINVAL;
+ }
+
+ if (copy_to_user(param->value, &value, sizeof(int))) {
+ DRM_ERROR("copy_to_user failed\n");
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int i915_get_bridge_dev(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+ if (!dev_priv->bridge_dev) {
+ DRM_ERROR("bridge device not found\n");
+ return -1;
+ }
+ return 0;
+}
+
+/* Allocate space for the MCH regs if needed, return nonzero on error */
+static int
+intel_alloc_mchbar_resource(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+ u32 temp_lo, temp_hi = 0;
+ u64 mchbar_addr;
+ int ret;
+
+ if (INTEL_INFO(dev)->gen >= 4)
+ pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
+ pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
+ mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
+
+ /* If ACPI doesn't have it, assume we need to allocate it ourselves */
+#ifdef CONFIG_PNP
+ if (mchbar_addr &&
+ pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
+ return 0;
+#endif
+
+ /* Get some space for it */
+ dev_priv->mch_res.name = "i915 MCHBAR";
+ dev_priv->mch_res.flags = IORESOURCE_MEM;
+ ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
+ &dev_priv->mch_res,
+ MCHBAR_SIZE, MCHBAR_SIZE,
+ PCIBIOS_MIN_MEM,
+ 0, pcibios_align_resource,
+ dev_priv->bridge_dev);
+ if (ret) {
+ DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
+ dev_priv->mch_res.start = 0;
+ return ret;
+ }
+
+ if (INTEL_INFO(dev)->gen >= 4)
+ pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
+ upper_32_bits(dev_priv->mch_res.start));
+
+ pci_write_config_dword(dev_priv->bridge_dev, reg,
+ lower_32_bits(dev_priv->mch_res.start));
+ return 0;
+}
+
+/* Setup MCHBAR if possible, return true if we should disable it again */
+static void
+intel_setup_mchbar(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+ u32 temp;
+ bool enabled;
+
+ if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+ return;
+
+ dev_priv->mchbar_need_disable = false;
+
+ if (IS_I915G(dev) || IS_I915GM(dev)) {
+ pci_read_config_dword(dev_priv->bridge_dev, DEVEN, &temp);
+ enabled = !!(temp & DEVEN_MCHBAR_EN);
+ } else {
+ pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
+ enabled = temp & 1;
+ }
+
+ /* If it's already enabled, don't have to do anything */
+ if (enabled)
+ return;
+
+ if (intel_alloc_mchbar_resource(dev))
+ return;
+
+ dev_priv->mchbar_need_disable = true;
+
+ /* Space is allocated or reserved, so enable it. */
+ if (IS_I915G(dev) || IS_I915GM(dev)) {
+ pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
+ temp | DEVEN_MCHBAR_EN);
+ } else {
+ pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
+ pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
+ }
+}
+
+static void
+intel_teardown_mchbar(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
+
+ if (dev_priv->mchbar_need_disable) {
+ if (IS_I915G(dev) || IS_I915GM(dev)) {
+ u32 deven_val;
+
+ pci_read_config_dword(dev_priv->bridge_dev, DEVEN,
+ &deven_val);
+ deven_val &= ~DEVEN_MCHBAR_EN;
+ pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
+ deven_val);
+ } else {
+ u32 mchbar_val;
+
+ pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg,
+ &mchbar_val);
+ mchbar_val &= ~1;
+ pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg,
+ mchbar_val);
+ }
+ }
+
+ if (dev_priv->mch_res.start)
+ release_resource(&dev_priv->mch_res);
+}
+
+/* true = enable decode, false = disable decoder */
+static unsigned int i915_vga_set_decode(void *cookie, bool state)
+{
+ struct drm_device *dev = cookie;
+
+ intel_modeset_vga_set_state(dev, state);
+ if (state)
+ return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
+ VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
+ else
+ return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
+}
+
+static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
+{
+ struct drm_device *dev = pci_get_drvdata(pdev);
+ pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
+
+ if (state == VGA_SWITCHEROO_ON) {
+ pr_info("switched on\n");
+ dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
+ /* i915 resume handler doesn't set to D0 */
+ pci_set_power_state(dev->pdev, PCI_D0);
+ i915_resume_switcheroo(dev);
+ dev->switch_power_state = DRM_SWITCH_POWER_ON;
+ } else {
+ pr_info("switched off\n");
+ dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
+ i915_suspend_switcheroo(dev, pmm);
+ dev->switch_power_state = DRM_SWITCH_POWER_OFF;
+ }
+}
+
+static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
+{
+ struct drm_device *dev = pci_get_drvdata(pdev);
+
+ /*
+ * FIXME: open_count is protected by drm_global_mutex but that would lead to
+ * locking inversion with the driver load path. And the access here is
+ * completely racy anyway. So don't bother with locking for now.
+ */
+ return dev->open_count == 0;
+}
+
+static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
+ .set_gpu_state = i915_switcheroo_set_state,
+ .reprobe = NULL,
+ .can_switch = i915_switcheroo_can_switch,
+};
+
+static void i915_gem_fini(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = to_i915(dev);
+
+ /*
+ * Neither the BIOS, ourselves or any other kernel
+ * expects the system to be in execlists mode on startup,
+ * so we need to reset the GPU back to legacy mode. And the only
+ * known way to disable logical contexts is through a GPU reset.
+ *
+ * So in order to leave the system in a known default configuration,
+ * always reset the GPU upon unload. Afterwards we then clean up the
+ * GEM state tracking, flushing off the requests and leaving the
+ * system in a known idle state.
+ *
+ * Note that is of the upmost importance that the GPU is idle and
+ * all stray writes are flushed *before* we dismantle the backing
+ * storage for the pinned objects.
+ *
+ * However, since we are uncertain that reseting the GPU on older
+ * machines is a good idea, we don't - just in case it leaves the
+ * machine in an unusable condition.
+ */
+ if (HAS_HW_CONTEXTS(dev)) {
+ int reset = intel_gpu_reset(dev_priv, ALL_ENGINES);
+ WARN_ON(reset && reset != -ENODEV);
+ }
+
+ mutex_lock(&dev->struct_mutex);
+ i915_gem_reset(dev);
+ i915_gem_cleanup_engines(dev);
+ i915_gem_context_fini(dev);
+ mutex_unlock(&dev->struct_mutex);
+
+ WARN_ON(!list_empty(&to_i915(dev)->context_list));
+}
+
+static int i915_load_modeset_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret;
+
+ if (i915_inject_load_failure())
+ return -ENODEV;
+
+ ret = intel_bios_init(dev_priv);
+ if (ret)
+ DRM_INFO("failed to find VBIOS tables\n");
+
+ /* If we have > 1 VGA cards, then we need to arbitrate access
+ * to the common VGA resources.
+ *
+ * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
+ * then we do not take part in VGA arbitration and the
+ * vga_client_register() fails with -ENODEV.
+ */
+ ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
+ if (ret && ret != -ENODEV)
+ goto out;
+
+ intel_register_dsm_handler();
+
+ ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops, false);
+ if (ret)
+ goto cleanup_vga_client;
+
+ /* must happen before intel_power_domains_init_hw() on VLV/CHV */
+ intel_update_rawclk(dev_priv);
+
+ intel_power_domains_init_hw(dev_priv, false);
+
+ intel_csr_ucode_init(dev_priv);
+
+ ret = intel_irq_install(dev_priv);
+ if (ret)
+ goto cleanup_csr;
+
+ intel_setup_gmbus(dev);
+
+ /* Important: The output setup functions called by modeset_init need
+ * working irqs for e.g. gmbus and dp aux transfers. */
+ intel_modeset_init(dev);
+
+ intel_guc_init(dev);
+
+ ret = i915_gem_init(dev);
+ if (ret)
+ goto cleanup_irq;
+
+ intel_modeset_gem_init(dev);
+
+ if (INTEL_INFO(dev)->num_pipes == 0)
+ return 0;
+
+ ret = intel_fbdev_init(dev);
+ if (ret)
+ goto cleanup_gem;
+
+ /* Only enable hotplug handling once the fbdev is fully set up. */
+ intel_hpd_init(dev_priv);
+
+ drm_kms_helper_poll_init(dev);
+
+ return 0;
+
+cleanup_gem:
+ i915_gem_fini(dev);
+cleanup_irq:
+ intel_guc_fini(dev);
+ drm_irq_uninstall(dev);
+ intel_teardown_gmbus(dev);
+cleanup_csr:
+ intel_csr_ucode_fini(dev_priv);
+ intel_power_domains_fini(dev_priv);
+ vga_switcheroo_unregister_client(dev->pdev);
+cleanup_vga_client:
+ vga_client_register(dev->pdev, NULL, NULL, NULL);
+out:
+ return ret;
+}
+
+#if IS_ENABLED(CONFIG_FB)
+static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+ struct apertures_struct *ap;
+ struct pci_dev *pdev = dev_priv->dev->pdev;
+ struct i915_ggtt *ggtt = &dev_priv->ggtt;
+ bool primary;
+ int ret;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return -ENOMEM;
+
+ ap->ranges[0].base = ggtt->mappable_base;
+ ap->ranges[0].size = ggtt->mappable_end;
+
+ primary =
+ pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+
+ ret = remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
+
+ kfree(ap);
+
+ return ret;
+}
+#else
+static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+ return 0;
+}
+#endif
+
+#if !defined(CONFIG_VGA_CONSOLE)
+static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
+{
+ return 0;
+}
+#elif !defined(CONFIG_DUMMY_CONSOLE)
+static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
+{
+ return -ENODEV;
+}
+#else
+static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
+{
+ int ret = 0;
+
+ DRM_INFO("Replacing VGA console driver\n");
+
+ console_lock();
+ if (con_is_bound(&vga_con))
+ ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
+ if (ret == 0) {
+ ret = do_unregister_con_driver(&vga_con);
+
+ /* Ignore "already unregistered". */
+ if (ret == -ENODEV)
+ ret = 0;
+ }
+ console_unlock();
+
+ return ret;
+}
+#endif
+
+static void i915_dump_device_info(struct drm_i915_private *dev_priv)
+{
+ const struct intel_device_info *info = &dev_priv->info;
+
+#define PRINT_S(name) "%s"
+#define SEP_EMPTY
+#define PRINT_FLAG(name) info->name ? #name "," : ""
+#define SEP_COMMA ,
+ DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x rev=0x%02x flags="
+ DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
+ info->gen,
+ dev_priv->dev->pdev->device,
+ dev_priv->dev->pdev->revision,
+ DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
+#undef PRINT_S
+#undef SEP_EMPTY
+#undef PRINT_FLAG
+#undef SEP_COMMA
+}
+
+static void cherryview_sseu_info_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_device_info *info;
+ u32 fuse, eu_dis;
+
+ info = (struct intel_device_info *)&dev_priv->info;
+ fuse = I915_READ(CHV_FUSE_GT);
+
+ info->slice_total = 1;
+
+ if (!(fuse & CHV_FGT_DISABLE_SS0)) {
+ info->subslice_per_slice++;
+ eu_dis = fuse & (CHV_FGT_EU_DIS_SS0_R0_MASK |
+ CHV_FGT_EU_DIS_SS0_R1_MASK);
+ info->eu_total += 8 - hweight32(eu_dis);
+ }
+
+ if (!(fuse & CHV_FGT_DISABLE_SS1)) {
+ info->subslice_per_slice++;
+ eu_dis = fuse & (CHV_FGT_EU_DIS_SS1_R0_MASK |
+ CHV_FGT_EU_DIS_SS1_R1_MASK);
+ info->eu_total += 8 - hweight32(eu_dis);
+ }
+
+ info->subslice_total = info->subslice_per_slice;
+ /*
+ * CHV expected to always have a uniform distribution of EU
+ * across subslices.
+ */
+ info->eu_per_subslice = info->subslice_total ?
+ info->eu_total / info->subslice_total :
+ 0;
+ /*
+ * CHV supports subslice power gating on devices with more than
+ * one subslice, and supports EU power gating on devices with
+ * more than one EU pair per subslice.
+ */
+ info->has_slice_pg = 0;
+ info->has_subslice_pg = (info->subslice_total > 1);
+ info->has_eu_pg = (info->eu_per_subslice > 2);
+}
+
+static void gen9_sseu_info_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_device_info *info;
+ int s_max = 3, ss_max = 4, eu_max = 8;
+ int s, ss;
+ u32 fuse2, s_enable, ss_disable, eu_disable;
+ u8 eu_mask = 0xff;
+
+ info = (struct intel_device_info *)&dev_priv->info;
+ fuse2 = I915_READ(GEN8_FUSE2);
+ s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >>
+ GEN8_F2_S_ENA_SHIFT;
+ ss_disable = (fuse2 & GEN9_F2_SS_DIS_MASK) >>
+ GEN9_F2_SS_DIS_SHIFT;
+
+ info->slice_total = hweight32(s_enable);
+ /*
+ * The subslice disable field is global, i.e. it applies
+ * to each of the enabled slices.
+ */
+ info->subslice_per_slice = ss_max - hweight32(ss_disable);
+ info->subslice_total = info->slice_total *
+ info->subslice_per_slice;
+
+ /*
+ * Iterate through enabled slices and subslices to
+ * count the total enabled EU.
+ */
+ for (s = 0; s < s_max; s++) {
+ if (!(s_enable & (0x1 << s)))
+ /* skip disabled slice */
+ continue;
+
+ eu_disable = I915_READ(GEN9_EU_DISABLE(s));
+ for (ss = 0; ss < ss_max; ss++) {
+ int eu_per_ss;
+
+ if (ss_disable & (0x1 << ss))
+ /* skip disabled subslice */
+ continue;
+
+ eu_per_ss = eu_max - hweight8((eu_disable >> (ss*8)) &
+ eu_mask);
+
+ /*
+ * Record which subslice(s) has(have) 7 EUs. we
+ * can tune the hash used to spread work among
+ * subslices if they are unbalanced.
+ */
+ if (eu_per_ss == 7)
+ info->subslice_7eu[s] |= 1 << ss;
+
+ info->eu_total += eu_per_ss;
+ }
+ }
+
+ /*
+ * SKL is expected to always have a uniform distribution
+ * of EU across subslices with the exception that any one
+ * EU in any one subslice may be fused off for die
+ * recovery. BXT is expected to be perfectly uniform in EU
+ * distribution.
+ */
+ info->eu_per_subslice = info->subslice_total ?
+ DIV_ROUND_UP(info->eu_total,
+ info->subslice_total) : 0;
+ /*
+ * SKL supports slice power gating on devices with more than
+ * one slice, and supports EU power gating on devices with
+ * more than one EU pair per subslice. BXT supports subslice
+ * power gating on devices with more than one subslice, and
+ * supports EU power gating on devices with more than one EU
+ * pair per subslice.
+ */
+ info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
+ (info->slice_total > 1));
+ info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
+ info->has_eu_pg = (info->eu_per_subslice > 2);
+}
+
+static void broadwell_sseu_info_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_device_info *info;
+ const int s_max = 3, ss_max = 3, eu_max = 8;
+ int s, ss;
+ u32 fuse2, eu_disable[s_max], s_enable, ss_disable;
+
+ fuse2 = I915_READ(GEN8_FUSE2);
+ s_enable = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;
+ ss_disable = (fuse2 & GEN8_F2_SS_DIS_MASK) >> GEN8_F2_SS_DIS_SHIFT;
+
+ eu_disable[0] = I915_READ(GEN8_EU_DISABLE0) & GEN8_EU_DIS0_S0_MASK;
+ eu_disable[1] = (I915_READ(GEN8_EU_DISABLE0) >> GEN8_EU_DIS0_S1_SHIFT) |
+ ((I915_READ(GEN8_EU_DISABLE1) & GEN8_EU_DIS1_S1_MASK) <<
+ (32 - GEN8_EU_DIS0_S1_SHIFT));
+ eu_disable[2] = (I915_READ(GEN8_EU_DISABLE1) >> GEN8_EU_DIS1_S2_SHIFT) |
+ ((I915_READ(GEN8_EU_DISABLE2) & GEN8_EU_DIS2_S2_MASK) <<
+ (32 - GEN8_EU_DIS1_S2_SHIFT));
+
+
+ info = (struct intel_device_info *)&dev_priv->info;
+ info->slice_total = hweight32(s_enable);
+
+ /*
+ * The subslice disable field is global, i.e. it applies
+ * to each of the enabled slices.
+ */
+ info->subslice_per_slice = ss_max - hweight32(ss_disable);
+ info->subslice_total = info->slice_total * info->subslice_per_slice;
+
+ /*
+ * Iterate through enabled slices and subslices to
+ * count the total enabled EU.
+ */
+ for (s = 0; s < s_max; s++) {
+ if (!(s_enable & (0x1 << s)))
+ /* skip disabled slice */
+ continue;
+
+ for (ss = 0; ss < ss_max; ss++) {
+ u32 n_disabled;
+
+ if (ss_disable & (0x1 << ss))
+ /* skip disabled subslice */
+ continue;
+
+ n_disabled = hweight8(eu_disable[s] >> (ss * eu_max));
+
+ /*
+ * Record which subslices have 7 EUs.
+ */
+ if (eu_max - n_disabled == 7)
+ info->subslice_7eu[s] |= 1 << ss;
+
+ info->eu_total += eu_max - n_disabled;
+ }
+ }
+
+ /*
+ * BDW is expected to always have a uniform distribution of EU across
+ * subslices with the exception that any one EU in any one subslice may
+ * be fused off for die recovery.
+ */
+ info->eu_per_subslice = info->subslice_total ?
+ DIV_ROUND_UP(info->eu_total, info->subslice_total) : 0;
+
+ /*
+ * BDW supports slice power gating on devices with more than
+ * one slice.
+ */
+ info->has_slice_pg = (info->slice_total > 1);
+ info->has_subslice_pg = 0;
+ info->has_eu_pg = 0;
+}
+
+/*
+ * Determine various intel_device_info fields at runtime.
+ *
+ * Use it when either:
+ * - it's judged too laborious to fill n static structures with the limit
+ * when a simple if statement does the job,
+ * - run-time checks (eg read fuse/strap registers) are needed.
+ *
+ * This function needs to be called:
+ * - after the MMIO has been setup as we are reading registers,
+ * - after the PCH has been detected,
+ * - before the first usage of the fields it can tweak.
+ */
+static void intel_device_info_runtime_init(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_device_info *info;
+ enum pipe pipe;
+
+ info = (struct intel_device_info *)&dev_priv->info;
+
+ /*
+ * Skylake and Broxton currently don't expose the topmost plane as its
+ * use is exclusive with the legacy cursor and we only want to expose
+ * one of those, not both. Until we can safely expose the topmost plane
+ * as a DRM_PLANE_TYPE_CURSOR with all the features exposed/supported,
+ * we don't expose the topmost plane at all to prevent ABI breakage
+ * down the line.
+ */
+ if (IS_BROXTON(dev)) {
+ info->num_sprites[PIPE_A] = 2;
+ info->num_sprites[PIPE_B] = 2;
+ info->num_sprites[PIPE_C] = 1;
+ } else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+ for_each_pipe(dev_priv, pipe)
+ info->num_sprites[pipe] = 2;
+ else
+ for_each_pipe(dev_priv, pipe)
+ info->num_sprites[pipe] = 1;
+
+ if (i915.disable_display) {
+ DRM_INFO("Display disabled (module parameter)\n");
+ info->num_pipes = 0;
+ } else if (info->num_pipes > 0 &&
+ (IS_GEN7(dev_priv) || IS_GEN8(dev_priv)) &&
+ HAS_PCH_SPLIT(dev)) {
+ u32 fuse_strap = I915_READ(FUSE_STRAP);
+ u32 sfuse_strap = I915_READ(SFUSE_STRAP);
+
+ /*
+ * SFUSE_STRAP is supposed to have a bit signalling the display
+ * is fused off. Unfortunately it seems that, at least in
+ * certain cases, fused off display means that PCH display
+ * reads don't land anywhere. In that case, we read 0s.
+ *
+ * On CPT/PPT, we can detect this case as SFUSE_STRAP_FUSE_LOCK
+ * should be set when taking over after the firmware.
+ */
+ if (fuse_strap & ILK_INTERNAL_DISPLAY_DISABLE ||
+ sfuse_strap & SFUSE_STRAP_DISPLAY_DISABLED ||
+ (dev_priv->pch_type == PCH_CPT &&
+ !(sfuse_strap & SFUSE_STRAP_FUSE_LOCK))) {
+ DRM_INFO("Display fused off, disabling\n");
+ info->num_pipes = 0;
+ } else if (fuse_strap & IVB_PIPE_C_DISABLE) {
+ DRM_INFO("PipeC fused off\n");
+ info->num_pipes -= 1;
+ }
+ } else if (info->num_pipes > 0 && IS_GEN9(dev_priv)) {
+ u32 dfsm = I915_READ(SKL_DFSM);
+ u8 disabled_mask = 0;
+ bool invalid;
+ int num_bits;
+
+ if (dfsm & SKL_DFSM_PIPE_A_DISABLE)
+ disabled_mask |= BIT(PIPE_A);
+ if (dfsm & SKL_DFSM_PIPE_B_DISABLE)
+ disabled_mask |= BIT(PIPE_B);
+ if (dfsm & SKL_DFSM_PIPE_C_DISABLE)
+ disabled_mask |= BIT(PIPE_C);
+
+ num_bits = hweight8(disabled_mask);
+
+ switch (disabled_mask) {
+ case BIT(PIPE_A):
+ case BIT(PIPE_B):
+ case BIT(PIPE_A) | BIT(PIPE_B):
+ case BIT(PIPE_A) | BIT(PIPE_C):
+ invalid = true;
+ break;
+ default:
+ invalid = false;
+ }
+
+ if (num_bits > info->num_pipes || invalid)
+ DRM_ERROR("invalid pipe fuse configuration: 0x%x\n",
+ disabled_mask);
+ else
+ info->num_pipes -= num_bits;
+ }
+
+ /* Initialize slice/subslice/EU info */
+ if (IS_CHERRYVIEW(dev))
+ cherryview_sseu_info_init(dev);
+ else if (IS_BROADWELL(dev))
+ broadwell_sseu_info_init(dev);
+ else if (INTEL_INFO(dev)->gen >= 9)
+ gen9_sseu_info_init(dev);
+
+ info->has_snoop = !info->has_llc;
+
+ /* Snooping is broken on BXT A stepping. */
+ if (IS_BXT_REVID(dev, 0, BXT_REVID_A1))
+ info->has_snoop = false;
+
+ DRM_DEBUG_DRIVER("slice total: %u\n", info->slice_total);
+ DRM_DEBUG_DRIVER("subslice total: %u\n", info->subslice_total);
+ DRM_DEBUG_DRIVER("subslice per slice: %u\n", info->subslice_per_slice);
+ DRM_DEBUG_DRIVER("EU total: %u\n", info->eu_total);
+ DRM_DEBUG_DRIVER("EU per subslice: %u\n", info->eu_per_subslice);
+ DRM_DEBUG_DRIVER("has slice power gating: %s\n",
+ info->has_slice_pg ? "y" : "n");
+ DRM_DEBUG_DRIVER("has subslice power gating: %s\n",
+ info->has_subslice_pg ? "y" : "n");
+ DRM_DEBUG_DRIVER("has EU power gating: %s\n",
+ info->has_eu_pg ? "y" : "n");
+
+ i915.enable_execlists =
+ intel_sanitize_enable_execlists(dev_priv,
+ i915.enable_execlists);
+
+ /*
+ * i915.enable_ppgtt is read-only, so do an early pass to validate the
+ * user's requested state against the hardware/driver capabilities. We
+ * do this now so that we can print out any log messages once rather
+ * than every time we check intel_enable_ppgtt().
+ */
+ i915.enable_ppgtt =
+ intel_sanitize_enable_ppgtt(dev_priv, i915.enable_ppgtt);
+ DRM_DEBUG_DRIVER("ppgtt mode: %i\n", i915.enable_ppgtt);
+}
+
+static void intel_init_dpio(struct drm_i915_private *dev_priv)
+{
+ /*
+ * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
+ * CHV x1 PHY (DP/HDMI D)
+ * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
+ */
+ if (IS_CHERRYVIEW(dev_priv)) {
+ DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
+ DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
+ } else if (IS_VALLEYVIEW(dev_priv)) {
+ DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+ }
+}
+
+static int i915_workqueues_init(struct drm_i915_private *dev_priv)
+{
+ /*
+ * The i915 workqueue is primarily used for batched retirement of
+ * requests (and thus managing bo) once the task has been completed
+ * by the GPU. i915_gem_retire_requests() is called directly when we
+ * need high-priority retirement, such as waiting for an explicit
+ * bo.
+ *
+ * It is also used for periodic low-priority events, such as
+ * idle-timers and recording error state.
+ *
+ * All tasks on the workqueue are expected to acquire the dev mutex
+ * so there is no point in running more than one instance of the
+ * workqueue at any time. Use an ordered one.
+ */
+ dev_priv->wq = alloc_ordered_workqueue("i915", 0);
+ if (dev_priv->wq == NULL)
+ goto out_err;
+
+ dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0);
+ if (dev_priv->hotplug.dp_wq == NULL)
+ goto out_free_wq;
+
+ dev_priv->gpu_error.hangcheck_wq =
+ alloc_ordered_workqueue("i915-hangcheck", 0);
+ if (dev_priv->gpu_error.hangcheck_wq == NULL)
+ goto out_free_dp_wq;
+
+ return 0;
+
+out_free_dp_wq:
+ destroy_workqueue(dev_priv->hotplug.dp_wq);
+out_free_wq:
+ destroy_workqueue(dev_priv->wq);
+out_err:
+ DRM_ERROR("Failed to allocate workqueues.\n");
+
+ return -ENOMEM;
+}
+
+static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
+{
+ destroy_workqueue(dev_priv->gpu_error.hangcheck_wq);
+ destroy_workqueue(dev_priv->hotplug.dp_wq);
+ destroy_workqueue(dev_priv->wq);
+}
+
+/**
+ * i915_driver_init_early - setup state not requiring device access
+ * @dev_priv: device private
+ *
+ * Initialize everything that is a "SW-only" state, that is state not
+ * requiring accessing the device or exposing the driver via kernel internal
+ * or userspace interfaces. Example steps belonging here: lock initialization,
+ * system memory allocation, setting up device specific attributes and
+ * function hooks not requiring accessing the device.
+ */
+static int i915_driver_init_early(struct drm_i915_private *dev_priv,
+ const struct pci_device_id *ent)
+{
+ const struct intel_device_info *match_info =
+ (struct intel_device_info *)ent->driver_data;
+ struct intel_device_info *device_info;
+ int ret = 0;
+
+ if (i915_inject_load_failure())
+ return -ENODEV;
+
+ /* Setup the write-once "constant" device info */
+ device_info = (struct intel_device_info *)&dev_priv->info;
+ memcpy(device_info, match_info, sizeof(*device_info));
+ device_info->device_id = dev_priv->drm.pdev->device;
+
+ BUG_ON(device_info->gen > sizeof(device_info->gen_mask) * BITS_PER_BYTE);
+ device_info->gen_mask = BIT(device_info->gen - 1);
+
+ spin_lock_init(&dev_priv->irq_lock);
+ spin_lock_init(&dev_priv->gpu_error.lock);
+ mutex_init(&dev_priv->backlight_lock);
+ spin_lock_init(&dev_priv->uncore.lock);
+ spin_lock_init(&dev_priv->mm.object_stat_lock);
+ spin_lock_init(&dev_priv->mmio_flip_lock);
+ mutex_init(&dev_priv->sb_lock);
+ mutex_init(&dev_priv->modeset_restore_lock);
+ mutex_init(&dev_priv->av_mutex);
+ mutex_init(&dev_priv->wm.wm_mutex);
+ mutex_init(&dev_priv->pps_mutex);
+
+ ret = i915_workqueues_init(dev_priv);
+ if (ret < 0)
+ return ret;
+
+ /* This must be called before any calls to HAS_PCH_* */
+ intel_detect_pch(&dev_priv->drm);
+
+ intel_pm_setup(&dev_priv->drm);
+ intel_init_dpio(dev_priv);
+ intel_power_domains_init(dev_priv);
+ intel_irq_init(dev_priv);
+ intel_init_display_hooks(dev_priv);
+ intel_init_clock_gating_hooks(dev_priv);
+ intel_init_audio_hooks(dev_priv);
+ i915_gem_load_init(&dev_priv->drm);
+
+ intel_display_crc_init(&dev_priv->drm);
+
+ i915_dump_device_info(dev_priv);
+
+ /* Not all pre-production machines fall into this category, only the
+ * very first ones. Almost everything should work, except for maybe
+ * suspend/resume. And we don't implement workarounds that affect only
+ * pre-production machines. */
+ if (IS_HSW_EARLY_SDV(dev_priv))
+ DRM_INFO("This is an early pre-production Haswell machine. "
+ "It may not be fully functional.\n");
+
+ return 0;
+}
+
+/**
+ * i915_driver_cleanup_early - cleanup the setup done in i915_driver_init_early()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_early(struct drm_i915_private *dev_priv)
+{
+ i915_gem_load_cleanup(dev_priv->dev);
+ i915_workqueues_cleanup(dev_priv);
+}
+
+static int i915_mmio_setup(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ int mmio_bar;
+ int mmio_size;
+
+ mmio_bar = IS_GEN2(dev) ? 1 : 0;
+ /*
+ * Before gen4, the registers and the GTT are behind different BARs.
+ * However, from gen4 onwards, the registers and the GTT are shared
+ * in the same BAR, so we want to restrict this ioremap from
+ * clobbering the GTT which we want ioremap_wc instead. Fortunately,
+ * the register BAR remains the same size for all the earlier
+ * generations up to Ironlake.
+ */
+ if (INTEL_INFO(dev)->gen < 5)
+ mmio_size = 512 * 1024;
+ else
+ mmio_size = 2 * 1024 * 1024;
+ dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size);
+ if (dev_priv->regs == NULL) {
+ DRM_ERROR("failed to map registers\n");
+
+ return -EIO;
+ }
+
+ /* Try to make sure MCHBAR is enabled before poking at it */
+ intel_setup_mchbar(dev);
+
+ return 0;
+}
+
+static void i915_mmio_cleanup(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = to_i915(dev);
+
+ intel_teardown_mchbar(dev);
+ pci_iounmap(dev->pdev, dev_priv->regs);
+}
+
+/**
+ * i915_driver_init_mmio - setup device MMIO
+ * @dev_priv: device private
+ *
+ * Setup minimal device state necessary for MMIO accesses later in the
+ * initialization sequence. The setup here should avoid any other device-wide
+ * side effects or exposing the driver via kernel internal or user space
+ * interfaces.
+ */
+static int i915_driver_init_mmio(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ int ret;
+
+ if (i915_inject_load_failure())
+ return -ENODEV;
+
+ if (i915_get_bridge_dev(dev))
+ return -EIO;
+
+ ret = i915_mmio_setup(dev);
+ if (ret < 0)
+ goto put_bridge;
+
+ intel_uncore_init(dev_priv);
+
+ return 0;
+
+put_bridge:
+ pci_dev_put(dev_priv->bridge_dev);
+
+ return ret;
+}
+
+/**
+ * i915_driver_cleanup_mmio - cleanup the setup done in i915_driver_init_mmio()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+
+ intel_uncore_fini(dev_priv);
+ i915_mmio_cleanup(dev);
+ pci_dev_put(dev_priv->bridge_dev);
+}
+
+/**
+ * i915_driver_init_hw - setup state requiring device access
+ * @dev_priv: device private
+ *
+ * Setup state that requires accessing the device, but doesn't require
+ * exposing the driver via kernel internal or userspace interfaces.
+ */
+static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct i915_ggtt *ggtt = &dev_priv->ggtt;
+ uint32_t aperture_size;
+ int ret;
+
+ if (i915_inject_load_failure())
+ return -ENODEV;
+
+ intel_device_info_runtime_init(dev);
+
+ ret = i915_ggtt_init_hw(dev);
+ if (ret)
+ return ret;
+
+ ret = i915_ggtt_enable_hw(dev);
+ if (ret) {
+ DRM_ERROR("failed to enable GGTT\n");
+ goto out_ggtt;
+ }
+
+ /* WARNING: Apparently we must kick fbdev drivers before vgacon,
+ * otherwise the vga fbdev driver falls over. */
+ ret = i915_kick_out_firmware_fb(dev_priv);
+ if (ret) {
+ DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
+ goto out_ggtt;
+ }
+
+ ret = i915_kick_out_vgacon(dev_priv);
+ if (ret) {
+ DRM_ERROR("failed to remove conflicting VGA console\n");
+ goto out_ggtt;
+ }
+
+ pci_set_master(dev->pdev);
+
+ /* overlay on gen2 is broken and can't address above 1G */
+ if (IS_GEN2(dev)) {
+ ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
+ if (ret) {
+ DRM_ERROR("failed to set DMA mask\n");
+
+ goto out_ggtt;
+ }
+ }
+
+
+ /* 965GM sometimes incorrectly writes to hardware status page (HWS)
+ * using 32bit addressing, overwriting memory if HWS is located
+ * above 4GB.
+ *
+ * The documentation also mentions an issue with undefined
+ * behaviour if any general state is accessed within a page above 4GB,
+ * which also needs to be handled carefully.
+ */
+ if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) {
+ ret = dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
+
+ if (ret) {
+ DRM_ERROR("failed to set DMA mask\n");
+
+ goto out_ggtt;
+ }
+ }
+
+ aperture_size = ggtt->mappable_end;
+
+ ggtt->mappable =
+ io_mapping_create_wc(ggtt->mappable_base,
+ aperture_size);
+ if (!ggtt->mappable) {
+ ret = -EIO;
+ goto out_ggtt;
+ }
+
+ ggtt->mtrr = arch_phys_wc_add(ggtt->mappable_base,
+ aperture_size);
+
+ pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY,
+ PM_QOS_DEFAULT_VALUE);
+
+ intel_uncore_sanitize(dev_priv);
+
+ intel_opregion_setup(dev_priv);
+
+ i915_gem_load_init_fences(dev_priv);
+
+ /* On the 945G/GM, the chipset reports the MSI capability on the
+ * integrated graphics even though the support isn't actually there
+ * according to the published specs. It doesn't appear to function
+ * correctly in testing on 945G.
+ * This may be a side effect of MSI having been made available for PEG
+ * and the registers being closely associated.
+ *
+ * According to chipset errata, on the 965GM, MSI interrupts may
+ * be lost or delayed, but we use them anyways to avoid
+ * stuck interrupts on some machines.
+ */
+ if (!IS_I945G(dev) && !IS_I945GM(dev)) {
+ if (pci_enable_msi(dev->pdev) < 0)
+ DRM_DEBUG_DRIVER("can't enable MSI");
+ }
+
+ return 0;
+
+out_ggtt:
+ i915_ggtt_cleanup_hw(dev);
+
+ return ret;
+}
+
+/**
+ * i915_driver_cleanup_hw - cleanup the setup done in i915_driver_init_hw()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ struct i915_ggtt *ggtt = &dev_priv->ggtt;
+
+ if (dev->pdev->msi_enabled)
+ pci_disable_msi(dev->pdev);
+
+ pm_qos_remove_request(&dev_priv->pm_qos);
+ arch_phys_wc_del(ggtt->mtrr);
+ io_mapping_free(ggtt->mappable);
+ i915_ggtt_cleanup_hw(dev);
+}
+
+/**
+ * i915_driver_register - register the driver with the rest of the system
+ * @dev_priv: device private
+ *
+ * Perform any steps necessary to make the driver available via kernel
+ * internal or userspace interfaces.
+ */
+static void i915_driver_register(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+
+ i915_gem_shrinker_init(dev_priv);
+
+ /*
+ * Notify a valid surface after modesetting,
+ * when running inside a VM.
+ */
+ if (intel_vgpu_active(dev_priv))
+ I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
+
+ /* Reveal our presence to userspace */
+ if (drm_dev_register(dev, 0) == 0) {
+ i915_debugfs_register(dev_priv);
+ i915_setup_sysfs(dev);
+ intel_modeset_register(dev_priv);
+ } else
+ DRM_ERROR("Failed to register driver for userspace access!\n");
+
+ if (INTEL_INFO(dev_priv)->num_pipes) {
+ /* Must be done after probing outputs */
+ intel_opregion_register(dev_priv);
+ acpi_video_register();
+ }
+
+ if (IS_GEN5(dev_priv))
+ intel_gpu_ips_init(dev_priv);
+
+ i915_audio_component_init(dev_priv);
+
+ /*
+ * Some ports require correctly set-up hpd registers for detection to
+ * work properly (leading to ghost connected connector status), e.g. VGA
+ * on gm45. Hence we can only set up the initial fbdev config after hpd
+ * irqs are fully enabled. Now we should scan for the initial config
+ * only once hotplug handling is enabled, but due to screwed-up locking
+ * around kms/fbdev init we can't protect the fdbev initial config
+ * scanning against hotplug events. Hence do this first and ignore the
+ * tiny window where we will loose hotplug notifactions.
+ */
+ intel_fbdev_initial_config_async(dev);
+}
+
+/**
+ * i915_driver_unregister - cleanup the registration done in i915_driver_regiser()
+ * @dev_priv: device private
+ */
+static void i915_driver_unregister(struct drm_i915_private *dev_priv)
+{
+ i915_audio_component_cleanup(dev_priv);
+
+ intel_gpu_ips_teardown();
+ acpi_video_unregister();
+ intel_opregion_unregister(dev_priv);
+
+ intel_modeset_unregister(dev_priv);
+ i915_teardown_sysfs(dev_priv->dev);
+ i915_debugfs_unregister(dev_priv);
+ drm_dev_unregister(dev_priv->dev);
+
+ i915_gem_shrinker_cleanup(dev_priv);
+}
+
+/**
+ * i915_driver_load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ * - drive output discovery via intel_modeset_init()
+ * - initialize the memory manager
+ * - allocate initial config memory
+ * - setup the DRM framebuffer with the allocated memory
+ */
+static int i915_driver_load(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct drm_i915_private *dev_priv;
+ int ret;
-static const struct intel_device_info intel_skylake_info = {
- BDW_FEATURES,
- .is_skylake = 1,
- .gen = 9,
-};
+ dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
+ if (dev_priv == NULL)
+ return -ENOMEM;
-static const struct intel_device_info intel_skylake_gt3_info = {
- BDW_FEATURES,
- .is_skylake = 1,
- .gen = 9,
- .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
+ ret = drm_dev_init(&dev_priv->drm, &driver, &pdev->dev);
+ if (ret) {
+ kfree(dev_priv);
+ goto out;
+ }
-static const struct intel_device_info intel_broxton_info = {
- .is_preliminary = 1,
- .is_broxton = 1,
- .gen = 9,
- .need_gfx_hws = 1, .has_hotplug = 1,
- .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
- .num_pipes = 3,
- .has_ddi = 1,
- .has_fpga_dbg = 1,
- .has_fbc = 1,
- GEN_DEFAULT_PIPEOFFSETS,
- IVB_CURSOR_OFFSETS,
- BDW_COLORS,
-};
+ /* Must be set before calling __i915_printk */
+ dev_priv->drm.pdev = pdev;
+ dev_priv->drm.dev_private = dev_priv;
+ dev_priv->dev = &dev_priv->drm;
-static const struct intel_device_info intel_kabylake_info = {
- BDW_FEATURES,
- .is_kabylake = 1,
- .gen = 9,
-};
+ ret = pci_enable_device(pdev);
+ if (ret)
+ goto out_free_priv;
-static const struct intel_device_info intel_kabylake_gt3_info = {
- BDW_FEATURES,
- .is_kabylake = 1,
- .gen = 9,
- .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
-};
+ pci_set_drvdata(pdev, &dev_priv->drm);
-/*
- * Make sure any device matches here are from most specific to most
- * general. For example, since the Quanta match is based on the subsystem
- * and subvendor IDs, we need it to come before the more general IVB
- * PCI ID matches, otherwise we'll use the wrong info struct above.
- */
-static const struct pci_device_id pciidlist[] = {
- INTEL_I830_IDS(&intel_i830_info),
- INTEL_I845G_IDS(&intel_845g_info),
- INTEL_I85X_IDS(&intel_i85x_info),
- INTEL_I865G_IDS(&intel_i865g_info),
- INTEL_I915G_IDS(&intel_i915g_info),
- INTEL_I915GM_IDS(&intel_i915gm_info),
- INTEL_I945G_IDS(&intel_i945g_info),
- INTEL_I945GM_IDS(&intel_i945gm_info),
- INTEL_I965G_IDS(&intel_i965g_info),
- INTEL_G33_IDS(&intel_g33_info),
- INTEL_I965GM_IDS(&intel_i965gm_info),
- INTEL_GM45_IDS(&intel_gm45_info),
- INTEL_G45_IDS(&intel_g45_info),
- INTEL_PINEVIEW_IDS(&intel_pineview_info),
- INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),
- INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),
- INTEL_SNB_D_IDS(&intel_sandybridge_d_info),
- INTEL_SNB_M_IDS(&intel_sandybridge_m_info),
- INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */
- INTEL_IVB_M_IDS(&intel_ivybridge_m_info),
- INTEL_IVB_D_IDS(&intel_ivybridge_d_info),
- INTEL_HSW_D_IDS(&intel_haswell_d_info),
- INTEL_HSW_M_IDS(&intel_haswell_m_info),
- INTEL_VLV_M_IDS(&intel_valleyview_m_info),
- INTEL_VLV_D_IDS(&intel_valleyview_d_info),
- INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info),
- INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),
- INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),
- INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info),
- INTEL_CHV_IDS(&intel_cherryview_info),
- INTEL_SKL_GT1_IDS(&intel_skylake_info),
- INTEL_SKL_GT2_IDS(&intel_skylake_info),
- INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info),
- INTEL_SKL_GT4_IDS(&intel_skylake_gt3_info),
- INTEL_BXT_IDS(&intel_broxton_info),
- INTEL_KBL_GT1_IDS(&intel_kabylake_info),
- INTEL_KBL_GT2_IDS(&intel_kabylake_info),
- INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info),
- INTEL_KBL_GT4_IDS(&intel_kabylake_gt3_info),
- {0, 0, 0}
-};
+ ret = i915_driver_init_early(dev_priv, ent);
+ if (ret < 0)
+ goto out_pci_disable;
-MODULE_DEVICE_TABLE(pci, pciidlist);
+ intel_runtime_pm_get(dev_priv);
-static enum intel_pch intel_virt_detect_pch(struct drm_device *dev)
-{
- enum intel_pch ret = PCH_NOP;
+ ret = i915_driver_init_mmio(dev_priv);
+ if (ret < 0)
+ goto out_runtime_pm_put;
+
+ ret = i915_driver_init_hw(dev_priv);
+ if (ret < 0)
+ goto out_cleanup_mmio;
/*
- * In a virtualized passthrough environment we can be in a
- * setup where the ISA bridge is not able to be passed through.
- * In this case, a south bridge can be emulated and we have to
- * make an educated guess as to which PCH is really there.
+ * TODO: move the vblank init and parts of modeset init steps into one
+ * of the i915_driver_init_/i915_driver_register functions according
+ * to the role/effect of the given init step.
*/
-
- if (IS_GEN5(dev)) {
- ret = PCH_IBX;
- DRM_DEBUG_KMS("Assuming Ibex Peak PCH\n");
- } else if (IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
- ret = PCH_CPT;
- DRM_DEBUG_KMS("Assuming CouarPoint PCH\n");
- } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
- ret = PCH_LPT;
- DRM_DEBUG_KMS("Assuming LynxPoint PCH\n");
- } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
- ret = PCH_SPT;
- DRM_DEBUG_KMS("Assuming SunrisePoint PCH\n");
+ if (INTEL_INFO(dev_priv)->num_pipes) {
+ ret = drm_vblank_init(dev_priv->dev,
+ INTEL_INFO(dev_priv)->num_pipes);
+ if (ret)
+ goto out_cleanup_hw;
}
+ ret = i915_load_modeset_init(dev_priv->dev);
+ if (ret < 0)
+ goto out_cleanup_vblank;
+
+ i915_driver_register(dev_priv);
+
+ intel_runtime_pm_enable(dev_priv);
+
+ intel_runtime_pm_put(dev_priv);
+
+ return 0;
+
+out_cleanup_vblank:
+ drm_vblank_cleanup(dev_priv->dev);
+out_cleanup_hw:
+ i915_driver_cleanup_hw(dev_priv);
+out_cleanup_mmio:
+ i915_driver_cleanup_mmio(dev_priv);
+out_runtime_pm_put:
+ intel_runtime_pm_put(dev_priv);
+ i915_driver_cleanup_early(dev_priv);
+out_pci_disable:
+ pci_disable_device(pdev);
+out_free_priv:
+ drm_dev_unref(&dev_priv->drm);
+out:
+ i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret);
return ret;
}
-void intel_detect_pch(struct drm_device *dev)
+static int i915_driver_unload(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct pci_dev *pch = NULL;
+ int ret;
- /* In all current cases, num_pipes is equivalent to the PCH_NOP setting
- * (which really amounts to a PCH but no South Display).
- */
- if (INTEL_INFO(dev)->num_pipes == 0) {
- dev_priv->pch_type = PCH_NOP;
- return;
+ intel_fbdev_fini(dev);
+
+ ret = i915_gem_suspend(dev);
+ if (ret) {
+ DRM_ERROR("failed to idle hardware: %d\n", ret);
+ return ret;
}
+ intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
+
+ i915_driver_unregister(dev_priv);
+
+ drm_vblank_cleanup(dev);
+
+ intel_modeset_cleanup(dev);
+
/*
- * The reason to probe ISA bridge instead of Dev31:Fun0 is to
- * make graphics device passthrough work easy for VMM, that only
- * need to expose ISA bridge to let driver know the real hardware
- * underneath. This is a requirement from virtualization team.
- *
- * In some virtualized environments (e.g. XEN), there is irrelevant
- * ISA bridge in the system. To work reliably, we should scan trhough
- * all the ISA bridge devices and check for the first match, instead
- * of only checking the first one.
+ * free the memory space allocated for the child device
+ * config parsed from VBT
*/
- while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
- if (pch->vendor == PCI_VENDOR_ID_INTEL) {
- unsigned short id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
- dev_priv->pch_id = id;
+ if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) {
+ kfree(dev_priv->vbt.child_dev);
+ dev_priv->vbt.child_dev = NULL;
+ dev_priv->vbt.child_dev_num = 0;
+ }
+ kfree(dev_priv->vbt.sdvo_lvds_vbt_mode);
+ dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
+ kfree(dev_priv->vbt.lfp_lvds_vbt_mode);
+ dev_priv->vbt.lfp_lvds_vbt_mode = NULL;
- if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
- dev_priv->pch_type = PCH_IBX;
- DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
- WARN_ON(!IS_GEN5(dev));
- } else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
- dev_priv->pch_type = PCH_CPT;
- DRM_DEBUG_KMS("Found CougarPoint PCH\n");
- WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
- } else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
- /* PantherPoint is CPT compatible */
- dev_priv->pch_type = PCH_CPT;
- DRM_DEBUG_KMS("Found PantherPoint PCH\n");
- WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
- } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
- dev_priv->pch_type = PCH_LPT;
- DRM_DEBUG_KMS("Found LynxPoint PCH\n");
- WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
- WARN_ON(IS_HSW_ULT(dev) || IS_BDW_ULT(dev));
- } else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
- dev_priv->pch_type = PCH_LPT;
- DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
- WARN_ON(!IS_HASWELL(dev) && !IS_BROADWELL(dev));
- WARN_ON(!IS_HSW_ULT(dev) && !IS_BDW_ULT(dev));
- } else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
- dev_priv->pch_type = PCH_SPT;
- DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
- WARN_ON(!IS_SKYLAKE(dev) &&
- !IS_KABYLAKE(dev));
- } else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
- dev_priv->pch_type = PCH_SPT;
- DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
- WARN_ON(!IS_SKYLAKE(dev) &&
- !IS_KABYLAKE(dev));
- } else if ((id == INTEL_PCH_P2X_DEVICE_ID_TYPE) ||
- (id == INTEL_PCH_P3X_DEVICE_ID_TYPE) ||
- ((id == INTEL_PCH_QEMU_DEVICE_ID_TYPE) &&
- pch->subsystem_vendor == 0x1af4 &&
- pch->subsystem_device == 0x1100)) {
- dev_priv->pch_type = intel_virt_detect_pch(dev);
- } else
- continue;
+ vga_switcheroo_unregister_client(dev->pdev);
+ vga_client_register(dev->pdev, NULL, NULL, NULL);
- break;
- }
- }
- if (!pch)
- DRM_DEBUG_KMS("No PCH found.\n");
+ intel_csr_ucode_fini(dev_priv);
- pci_dev_put(pch);
+ /* Free error state after interrupts are fully disabled. */
+ cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
+ i915_destroy_error_state(dev);
+
+ /* Flush any outstanding unpin_work. */
+ flush_workqueue(dev_priv->wq);
+
+ intel_guc_fini(dev);
+ i915_gem_fini(dev);
+ intel_fbc_cleanup_cfb(dev_priv);
+
+ intel_power_domains_fini(dev_priv);
+
+ i915_driver_cleanup_hw(dev_priv);
+ i915_driver_cleanup_mmio(dev_priv);
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
+
+ i915_driver_cleanup_early(dev_priv);
+
+ return 0;
}
-bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv)
+static int i915_driver_open(struct drm_device *dev, struct drm_file *file)
{
- if (INTEL_GEN(dev_priv) < 6)
- return false;
+ int ret;
- if (i915.semaphores >= 0)
- return i915.semaphores;
+ ret = i915_gem_open(dev, file);
+ if (ret)
+ return ret;
- /* TODO: make semaphores and Execlists play nicely together */
- if (i915.enable_execlists)
- return false;
+ return 0;
+}
-#ifdef CONFIG_INTEL_IOMMU
- /* Enable semaphores on SNB when IO remapping is off */
- if (IS_GEN6(dev_priv) && intel_iommu_gfx_mapped)
- return false;
-#endif
+/**
+ * i915_driver_lastclose - clean up after all DRM clients have exited
+ * @dev: DRM device
+ *
+ * Take care of cleaning up after all DRM clients have exited. In the
+ * mode setting case, we want to restore the kernel's initial mode (just
+ * in case the last client left us in a bad state).
+ *
+ * Additionally, in the non-mode setting case, we'll tear down the GTT
+ * and DMA structures, since the kernel won't be using them, and clea
+ * up any GEM state.
+ */
+static void i915_driver_lastclose(struct drm_device *dev)
+{
+ intel_fbdev_restore_mode(dev);
+ vga_switcheroo_process_delayed_switch();
+}
- return true;
+static void i915_driver_preclose(struct drm_device *dev, struct drm_file *file)
+{
+ mutex_lock(&dev->struct_mutex);
+ i915_gem_context_close(dev, file);
+ i915_gem_release(dev, file);
+ mutex_unlock(&dev->struct_mutex);
+}
+
+static void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
+{
+ struct drm_i915_file_private *file_priv = file->driver_priv;
+
+ kfree(file_priv);
}
static void intel_suspend_encoders(struct drm_i915_private *dev_priv)
@@ -1039,7 +2613,7 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
!vga_switcheroo_handler_flags())
return -EPROBE_DEFER;
- return i915_driver_load(pdev, ent, &driver);
+ return i915_driver_load(pdev, ent);
}
static void
@@ -1747,6 +3321,68 @@ static const struct file_operations i915_driver_fops = {
.llseek = noop_llseek,
};
+static int
+i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file)
+{
+ return -ENODEV;
+}
+
+static const struct drm_ioctl_desc i915_ioctls[] = {
+ DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH|DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+ DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
+ DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_gem_context_reset_stats_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW),
+};
+
static struct drm_driver driver = {
/* Don't use MTRRs here; the Xserver or userspace app should
* deal with them for Intel hardware.
@@ -1772,6 +3408,7 @@ static struct drm_driver driver = {
.dumb_map_offset = i915_gem_mmap_gtt,
.dumb_destroy = drm_gem_dumb_destroy,
.ioctls = i915_ioctls,
+ .num_ioctls = ARRAY_SIZE(i915_ioctls),
.fops = &i915_driver_fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
@@ -1791,8 +3428,6 @@ static struct pci_driver i915_pci_driver = {
static int __init i915_init(void)
{
- driver.num_ioctls = i915_max_ioctl;
-
/*
* Enable KMS by default, unless explicitly overriden by
* either the i915.modeset prarameter or by the
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index fe121a8af146..f575b3222b85 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2857,16 +2857,13 @@ struct drm_i915_cmd_table {
#include "i915_trace.h"
-extern const struct drm_ioctl_desc i915_ioctls[];
-extern int i915_max_ioctl;
-
extern int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state);
extern int i915_resume_switcheroo(struct drm_device *dev);
int intel_sanitize_enable_ppgtt(struct drm_i915_private *dev_priv,
int enable_ppgtt);
-/* i915_dma.c */
+/* i915_drv.c */
void __printf(3, 4)
__i915_printk(struct drm_i915_private *dev_priv, const char *level,
const char *fmt, ...);
@@ -2874,16 +2871,6 @@ __i915_printk(struct drm_i915_private *dev_priv, const char *level,
#define i915_report_error(dev_priv, fmt, ...) \
__i915_printk(dev_priv, KERN_ERR, fmt, ##__VA_ARGS__)
-extern int i915_driver_load(struct pci_dev *pdev,
- const struct pci_device_id *ent,
- struct drm_driver *driver);
-extern int i915_driver_unload(struct drm_device *);
-extern int i915_driver_open(struct drm_device *dev, struct drm_file *file);
-extern void i915_driver_lastclose(struct drm_device * dev);
-extern void i915_driver_preclose(struct drm_device *dev,
- struct drm_file *file);
-extern void i915_driver_postclose(struct drm_device *dev,
- struct drm_file *file);
#ifdef CONFIG_COMPAT
extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
@@ -3690,7 +3677,6 @@ extern void intel_init_pch_refclk(struct drm_device *dev);
extern void intel_set_rps(struct drm_i915_private *dev_priv, u8 val);
extern void intel_set_memory_cxsr(struct drm_i915_private *dev_priv,
bool enable);
-extern void intel_detect_pch(struct drm_device *dev);
extern bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv);
int i915_reg_read_ioctl(struct drm_device *dev, void *data,
--
2.8.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
