Re: [PATCH] drm: use seqlocks for vblank time/count

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/09/2016 08:11 PM, Daniel Vetter wrote:
On Mon, May 09, 2016 at 08:16:07PM +0300, Ville Syrjälä wrote:
On Mon, May 09, 2016 at 05:08:43PM +0100, Matthew Auld wrote:
This patch aims to replace the roll-your-own seqlock implementation with
full-blown seqlock'. We also remove the timestamp ring-buffer in favour
of single timestamp/count pair protected by a seqlock. In turn this
means we can now increment the vblank freely without the need for
clamping.

This will also change the behaviour to block new readers while the
writer has the lock, whereas the old code would allow readers to
proceed in parallel. We do the whole hw counter + scanout position
query while holding the lock so it's not exactly zero amount of work,
but I'm not sure that's a real problem.

I guess we could reduce the scope of the seqlock, but then maybe we'd
need to keep the vblank_time_lock spinlock as well. The details escape
me now, so I'd have re-read the code again.

Ccing Mario too.

Yeah, my idea was to keep the spinlock, and only replace the stuff in
store_vblank and the few do {} while (cur_vblank != get_vblank_counter)
loops. Extending the seqlock stuff to everything seems indeed counter to
Mario's locking scheme.

So goal would be to really just replace the half-baked seqlock that we
have already, and leave all other locking unchanged.
-Daniel

+1 to that, for simplicity. I thought Ville already had a patch laying around somewhere which essentially does this?

-mario




Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Signed-off-by: Matthew Auld <matthew.auld@xxxxxxxxx>
---
  drivers/gpu/drm/drm_irq.c | 111 +++++++++-------------------------------------
  include/drm/drmP.h        |  14 ++----
  2 files changed, 25 insertions(+), 100 deletions(-)

diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 3c1a6f1..bfc6a8d 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -42,10 +42,6 @@
  #include <linux/vgaarb.h>
  #include <linux/export.h>

-/* Access macro for slots in vblank timestamp ringbuffer. */
-#define vblanktimestamp(dev, pipe, count) \
-	((dev)->vblank[pipe].time[(count) % DRM_VBLANKTIME_RBSIZE])
-
  /* Retry timestamp calculation up to 3 times to satisfy
   * drm_timestamp_precision before giving up.
   */
@@ -82,29 +78,13 @@ static void store_vblank(struct drm_device *dev, unsigned int pipe,
  			 struct timeval *t_vblank, u32 last)
  {
  	struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
-	u32 tslot;

-	assert_spin_locked(&dev->vblank_time_lock);
+	assert_spin_locked(&dev->vblank_seqlock.lock);

  	vblank->last = last;

-	/* All writers hold the spinlock, but readers are serialized by
-	 * the latching of vblank->count below.
-	 */
-	tslot = vblank->count + vblank_count_inc;
-	vblanktimestamp(dev, pipe, tslot) = *t_vblank;
-
-	/*
-	 * vblank timestamp updates are protected on the write side with
-	 * vblank_time_lock, but on the read side done locklessly using a
-	 * sequence-lock on the vblank counter. Ensure correct ordering using
-	 * memory barrriers. We need the barrier both before and also after the
-	 * counter update to synchronize with the next timestamp write.
-	 * The read-side barriers for this are in drm_vblank_count_and_time.
-	 */
-	smp_wmb();
+	vblank->time = *t_vblank;
  	vblank->count += vblank_count_inc;
-	smp_wmb();
  }

  /**
@@ -127,7 +107,7 @@ static void drm_reset_vblank_timestamp(struct drm_device *dev, unsigned int pipe
  	struct timeval t_vblank;
  	int count = DRM_TIMESTAMP_MAXRETRIES;

-	spin_lock(&dev->vblank_time_lock);
+	write_seqlock(&dev->vblank_seqlock);

  	/*
  	 * sample the current counter to avoid random jumps
@@ -152,7 +132,7 @@ static void drm_reset_vblank_timestamp(struct drm_device *dev, unsigned int pipe
  	 */
  	store_vblank(dev, pipe, 1, &t_vblank, cur_vblank);

-	spin_unlock(&dev->vblank_time_lock);
+	write_sequnlock(&dev->vblank_seqlock);
  }

  /**
@@ -205,7 +185,7 @@ static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
  		const struct timeval *t_old;
  		u64 diff_ns;

-		t_old = &vblanktimestamp(dev, pipe, vblank->count);
+		t_old = &vblank->time;
  		diff_ns = timeval_to_ns(&t_vblank) - timeval_to_ns(t_old);

  		/*
@@ -239,49 +219,6 @@ static void drm_update_vblank_count(struct drm_device *dev, unsigned int pipe,
  		diff = 1;
  	}

-	/*
-	 * FIMXE: Need to replace this hack with proper seqlocks.
-	 *
-	 * Restrict the bump of the software vblank counter to a safe maximum
-	 * value of +1 whenever there is the possibility that concurrent readers
-	 * of vblank timestamps could be active at the moment, as the current
-	 * implementation of the timestamp caching and updating is not safe
-	 * against concurrent readers for calls to store_vblank() with a bump
-	 * of anything but +1. A bump != 1 would very likely return corrupted
-	 * timestamps to userspace, because the same slot in the cache could
-	 * be concurrently written by store_vblank() and read by one of those
-	 * readers without the read-retry logic detecting the collision.
-	 *
-	 * Concurrent readers can exist when we are called from the
-	 * drm_vblank_off() or drm_vblank_on() functions and other non-vblank-
-	 * irq callers. However, all those calls to us are happening with the
-	 * vbl_lock locked to prevent drm_vblank_get(), so the vblank refcount
-	 * can't increase while we are executing. Therefore a zero refcount at
-	 * this point is safe for arbitrary counter bumps if we are called
-	 * outside vblank irq, a non-zero count is not 100% safe. Unfortunately
-	 * we must also accept a refcount of 1, as whenever we are called from
-	 * drm_vblank_get() -> drm_vblank_enable() the refcount will be 1 and
-	 * we must let that one pass through in order to not lose vblank counts
-	 * during vblank irq off - which would completely defeat the whole
-	 * point of this routine.
-	 *
-	 * Whenever we are called from vblank irq, we have to assume concurrent
-	 * readers exist or can show up any time during our execution, even if
-	 * the refcount is currently zero, as vblank irqs are usually only
-	 * enabled due to the presence of readers, and because when we are called
-	 * from vblank irq we can't hold the vbl_lock to protect us from sudden
-	 * bumps in vblank refcount. Therefore also restrict bumps to +1 when
-	 * called from vblank irq.
-	 */
-	if ((diff > 1) && (atomic_read(&vblank->refcount) > 1 ||
-	    (flags & DRM_CALLED_FROM_VBLIRQ))) {
-		DRM_DEBUG_VBL("clamping vblank bump to 1 on crtc %u: diffr=%u "
-			      "refcount %u, vblirq %u\n", pipe, diff,
-			      atomic_read(&vblank->refcount),
-			      (flags & DRM_CALLED_FROM_VBLIRQ) != 0);
-		diff = 1;
-	}
-
  	DRM_DEBUG_VBL("updating vblank count on crtc %u:"
  		      " current=%u, diff=%u, hw=%u hw_last=%u\n",
  		      pipe, vblank->count, diff, cur_vblank, vblank->last);
@@ -318,7 +255,7 @@ static void vblank_disable_and_save(struct drm_device *dev, unsigned int pipe)
  	 * so no updates of timestamps or count can happen after we've
  	 * disabled. Needed to prevent races in case of delayed irq's.
  	 */
-	spin_lock_irqsave(&dev->vblank_time_lock, irqflags);
+	write_seqlock_irqsave(&dev->vblank_seqlock, irqflags);

  	/*
  	 * Only disable vblank interrupts if they're enabled. This avoids
@@ -338,7 +275,7 @@ static void vblank_disable_and_save(struct drm_device *dev, unsigned int pipe)
  	 */
  	drm_update_vblank_count(dev, pipe, 0);

-	spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
+	write_sequnlock_irqrestore(&dev->vblank_seqlock, irqflags);
  }

  static void vblank_disable_fn(unsigned long arg)
@@ -404,7 +341,7 @@ int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs)
  	unsigned int i;

  	spin_lock_init(&dev->vbl_lock);
-	spin_lock_init(&dev->vblank_time_lock);
+	seqlock_init(&dev->vblank_seqlock);

  	dev->num_crtcs = num_crtcs;

@@ -991,25 +928,19 @@ u32 drm_vblank_count_and_time(struct drm_device *dev, unsigned int pipe,
  			      struct timeval *vblanktime)
  {
  	struct drm_vblank_crtc *vblank = &dev->vblank[pipe];
-	int count = DRM_TIMESTAMP_MAXRETRIES;
-	u32 cur_vblank;
+	u32 vblank_count;
+	unsigned int seq;

  	if (WARN_ON(pipe >= dev->num_crtcs))
  		return 0;

-	/*
-	 * Vblank timestamps are read lockless. To ensure consistency the vblank
-	 * counter is rechecked and ordering is ensured using memory barriers.
-	 * This works like a seqlock. The write-side barriers are in store_vblank.
-	 */
  	do {
-		cur_vblank = vblank->count;
-		smp_rmb();
-		*vblanktime = vblanktimestamp(dev, pipe, cur_vblank);
-		smp_rmb();
-	} while (cur_vblank != vblank->count && --count > 0);
+		seq = read_seqbegin(&dev->vblank_seqlock);
+		vblank_count = vblank->count;
+		*vblanktime = vblank->time;
+	} while (read_seqretry(&dev->vblank_seqlock, seq));

-	return cur_vblank;
+	return vblank_count;
  }
  EXPORT_SYMBOL(drm_vblank_count_and_time);

@@ -1160,11 +1091,11 @@ static int drm_vblank_enable(struct drm_device *dev, unsigned int pipe)

  	assert_spin_locked(&dev->vbl_lock);

-	spin_lock(&dev->vblank_time_lock);
+	write_seqlock(&dev->vblank_seqlock);

  	if (!vblank->enabled) {
  		/*
-		 * Enable vblank irqs under vblank_time_lock protection.
+		 * Enable vblank irqs under vblank_seqlock protection.
  		 * All vblank count & timestamp updates are held off
  		 * until we are done reinitializing master counter and
  		 * timestamps. Filtercode in drm_handle_vblank() will
@@ -1180,7 +1111,7 @@ static int drm_vblank_enable(struct drm_device *dev, unsigned int pipe)
  		}
  	}

-	spin_unlock(&dev->vblank_time_lock);
+	write_sequnlock(&dev->vblank_seqlock);

  	return ret;
  }
@@ -1880,18 +1811,18 @@ bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe)
  	 * vblank enable/disable, as this would cause inconsistent
  	 * or corrupted timestamps and vblank counts.
  	 */
-	spin_lock(&dev->vblank_time_lock);
+	write_seqlock(&dev->vblank_seqlock);

  	/* Vblank irq handling disabled. Nothing to do. */
  	if (!vblank->enabled) {
-		spin_unlock(&dev->vblank_time_lock);
+		write_sequnlock(&dev->vblank_seqlock);
  		spin_unlock_irqrestore(&dev->event_lock, irqflags);
  		return false;
  	}

  	drm_update_vblank_count(dev, pipe, DRM_CALLED_FROM_VBLIRQ);

-	spin_unlock(&dev->vblank_time_lock);
+	write_sequnlock(&dev->vblank_seqlock);

  	wake_up(&vblank->queue);
  	drm_handle_vblank_events(dev, pipe);
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 360b2a7..8bee424 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -52,6 +52,7 @@
  #include <linux/poll.h>
  #include <linux/ratelimit.h>
  #include <linux/sched.h>
+#include <linux/seqlock.h>
  #include <linux/slab.h>
  #include <linux/types.h>
  #include <linux/vmalloc.h>
@@ -392,11 +393,6 @@ struct drm_master {
  	void *driver_priv;
  };

-/* Size of ringbuffer for vblank timestamps. Just double-buffer
- * in initial implementation.
- */
-#define DRM_VBLANKTIME_RBSIZE 2
-
  /* Flags and return codes for get_vblank_timestamp() driver function. */
  #define DRM_CALLED_FROM_VBLIRQ 1
  #define DRM_VBLANKTIME_SCANOUTPOS_METHOD (1 << 0)
@@ -725,10 +721,8 @@ struct drm_vblank_crtc {
  	wait_queue_head_t queue;	/**< VBLANK wait queue */
  	struct timer_list disable_timer;		/* delayed disable timer */

-	/* vblank counter, protected by dev->vblank_time_lock for writes */
-	u32 count;
-	/* vblank timestamps, protected by dev->vblank_time_lock for writes */
-	struct timeval time[DRM_VBLANKTIME_RBSIZE];
+	u32 count;			/* vblank counter, protected by dev->vblank_seqlock */
+	struct timeval time;		/* vblank timestamp, protected by dev->vblank_seqlock */

  	atomic_t refcount;		/* number of users of vblank interruptsper crtc */
  	u32 last;			/* protected by dev->vbl_lock, used */
@@ -835,7 +829,7 @@ struct drm_device {
  	/* array of size num_crtcs */
  	struct drm_vblank_crtc *vblank;

-	spinlock_t vblank_time_lock;    /**< Protects vblank count and time updates during vblank enable/disable */
+	seqlock_t vblank_seqlock;	/**< Protects vblank count and time updates during vblank enable/disable */
  	spinlock_t vbl_lock;

  	u32 max_vblank_count;           /**< size of vblank counter register */
--
2.4.11

--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux