[PATCH 2/7] drm/i915: Use milliseconds in _wait_for macro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Promising 1us accuracy where we timeout using jiffies is
misleading. Convert the _wait_for macro to use milliseconds
and convert the 2 callsites.

Signed-off-by: Mika Kuoppala <mika.kuoppala@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_dp.c  |  4 ++--
 drivers/gpu/drm/i915/intel_drv.h | 13 +++++++------
 drivers/gpu/drm/i915/intel_psr.c |  6 +++---
 3 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 36330026ceff..a32617469816 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1699,8 +1699,8 @@ static void wait_panel_status(struct intel_dp *intel_dp,
 			I915_READ(pp_stat_reg),
 			I915_READ(pp_ctrl_reg));
 
-	if (_wait_for((I915_READ(pp_stat_reg) & mask) == value,
-		      5 * USEC_PER_SEC, 10 * USEC_PER_MSEC))
+	if (_wait_for_ms((I915_READ(pp_stat_reg) & mask) == value,
+			 5 * MSEC_PER_SEC, 10 * USEC_PER_MSEC))
 		DRM_ERROR("Panel status timeout: status %08x control %08x\n",
 				I915_READ(pp_stat_reg),
 				I915_READ(pp_ctrl_reg));
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 0fc8579e7b2e..488141929a7a 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -39,7 +39,7 @@
 #include <drm/drm_atomic.h>
 
 /**
- * _wait_for - magic (register) wait macro
+ * _wait_for_ms - magic (register) wait macro
  *
  * Does the right thing for modeset paths when run under kdgb or similar atomic
  * contexts. Note that it's important that we check the condition again after
@@ -50,8 +50,9 @@
  * drm_can_sleep() can be removed and in_atomic()/!in_atomic() asserts
  * added.
  */
-#define _wait_for(COND, US, W) ({ \
-	unsigned long timeout__ = jiffies + usecs_to_jiffies(US) + 1;	\
+#define _wait_for_ms(COND, TIMEOUT_MS, SLEEP_US) ({ \
+	const unsigned long timeout__ =					\
+		jiffies + msecs_to_jiffies(TIMEOUT_MS) + 1;		\
 	int ret__ = 0;							\
 	while (!(COND)) {						\
 		if (time_after(jiffies, timeout__)) {			\
@@ -59,8 +60,8 @@
 				ret__ = -ETIMEDOUT;			\
 			break;						\
 		}							\
-		if ((W) && drm_can_sleep()) {				\
-			usleep_range((W), (W)*2);			\
+		if ((SLEEP_US) && drm_can_sleep()) {			\
+			usleep_range((SLEEP_US), (SLEEP_US) * 2);	\
 		} else {						\
 			cpu_relax();					\
 		}							\
@@ -68,7 +69,7 @@
 	ret__;								\
 })
 
-#define wait_for(COND, MS)	  	_wait_for((COND), (MS) * 1000, 1000)
+#define wait_for(COND, MS)	 _wait_for_ms((COND), (MS), 1 * USEC_PER_MSEC)
 
 /* If CONFIG_PREEMPT_COUNT is disabled, in_atomic() always reports false. */
 #if defined(CONFIG_DRM_I915_DEBUG) && defined(CONFIG_PREEMPT_COUNT)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index c3abae4bc596..0ceb2026835e 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -506,9 +506,9 @@ static void hsw_psr_disable(struct intel_dp *intel_dp)
 			   I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
 
 		/* Wait till PSR is idle */
-		if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
-			       EDP_PSR_STATUS_STATE_MASK) == 0,
-			       2 * USEC_PER_SEC, 10 * USEC_PER_MSEC))
+		if (_wait_for_ms((I915_READ(EDP_PSR_STATUS_CTL) &
+				  EDP_PSR_STATUS_STATE_MASK) == 0,
+				 2 * MSEC_PER_SEC, 10 * USEC_PER_MSEC))
 			DRM_ERROR("Timed out waiting for PSR Idle State\n");
 
 		dev_priv->psr.active = false;
-- 
2.5.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux