No need for hard-coding the register value, the corresponding fields are defined properly in BSpec. No functional change. Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx> --- drivers/gpu/drm/i915/i915_reg.h | 3 ++- drivers/gpu/drm/i915/intel_pm.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c21b71c..0cb2e17 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6073,7 +6073,8 @@ enum skl_disp_power_wells { #define VLV_B0_WA_L3SQCREG1_VALUE 0x00D30000 #define GEN8_L3SQCREG1 _MMIO(0xB100) -#define BDW_WA_L3SQCREG1_DEFAULT 0x784000 +#define L3_GENERAL_PRIO_CREDITS(x) (((x) >> 1) << 19) +#define L3_HIGH_PRIO_CREDITS(x) (((x) >> 1) << 14) #define GEN7_L3CNTLREG1 _MMIO(0xB01C) #define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C47FF8C diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index a6fd4dd..a9b7626 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -6710,7 +6710,8 @@ static void broadwell_init_clock_gating(struct drm_device *dev) */ misccpctl = I915_READ(GEN7_MISCCPCTL); I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE); - I915_WRITE(GEN8_L3SQCREG1, BDW_WA_L3SQCREG1_DEFAULT); + I915_WRITE(GEN8_L3SQCREG1, L3_GENERAL_PRIO_CREDITS(30) | + L3_HIGH_PRIO_CREDITS(2)); /* * Wait at least 100 clocks before re-enabling clock gating. See * the definition of L3SQCREG1 in BSpec. -- 2.5.0 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx