From: Robert Bragg <robert@xxxxxxxxxxxxx> This will allow the ID to be given to the HW as the unique context identifier that's written, for example, to the context status buffer on preemption and included in reports written by the OA unit. Cc: Sourab Gupta <sourab.gupta@xxxxxxxxx> Signed-off-by: Robert Bragg <robert@xxxxxxxxxxxxx> --- drivers/gpu/drm/i915/i915_gem_context.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c index 9cb124e..6db5e3a 100644 --- a/drivers/gpu/drm/i915/i915_gem_context.c +++ b/drivers/gpu/drm/i915/i915_gem_context.c @@ -90,6 +90,10 @@ #include "i915_drv.h" #include "i915_trace.h" +/* With execlist scheduling we can program our own HW context ID but we we + * are limited to 20bits */ +#define I915_MAX_HW_CTX_ID ((1<<20)-1) + /* This is a HW constraint. The value below is the largest known requirement * I've seen in a spec to date, and that was a workaround for a non-shipping * part. It should be safe to decrease this, but it's more future proof as is. @@ -264,13 +268,8 @@ __create_hw_context(struct drm_device *dev, ctx->file_priv = file_priv; ctx->user_handle = ret; - /* TODO: If required, this global id can be used for programming the hw - * fields too. In that case, we'll have take care of hw restrictions - * while allocating idr. e.g. for some hw, we may not have full 32 bits - * available. - */ ret = idr_alloc_cyclic(&dev_priv->global_ctx_idr, - ctx, 0, 0, GFP_KERNEL); + ctx, 0, I915_MAX_HW_CTX_ID, GFP_KERNEL); if (ret < 0) goto err_out; -- 1.9.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
