On Tue, Apr 19, 2016 at 08:00:10AM +0530, Kumar, Shobhit wrote:
> On Monday 18 April 2016 09:47 PM, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > The power cycle delay starts _after_ turning off the panel power. Do the
> > msleep after frobbing the pmic panel power gpio.
> >
> > Also toss in a FIXME about optimizing away needless waits.
> >
> > Cc: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
> > Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> > Fixes: fc45e8219907 ("drm/i915: Use the CRC gpio for panel enable/disable")
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Reviewed-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
Pushed to dinq. Thanks for the reviews.
>
> > ---
> > drivers/gpu/drm/i915/intel_dsi.c | 7 ++++++-
> > 1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> > index 34328ddaaab5..2b22bb9bb86f 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > @@ -688,11 +688,16 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder)
> > drm_panel_unprepare(intel_dsi->panel);
> >
> > msleep(intel_dsi->panel_off_delay);
> > - msleep(intel_dsi->panel_pwr_cycle_delay);
> >
> > /* Panel Disable over CRC PMIC */
> > if (intel_dsi->gpio_panel)
> > gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
> > +
> > + /*
> > + * FIXME As we do with eDP, just make a note of the time here
> > + * and perform the wait before the next panel power on.
> > + */
> > + msleep(intel_dsi->panel_pwr_cycle_delay);
> > }
> >
> > static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
> >
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
