On ma, 2016-04-18 at 18:45 +0300, Imre Deak wrote: > On ma, 2016-04-18 at 13:57 +0000, Patchwork wrote: > > == Series Details == > > > > Series: drm/i915: Fix a few suspend/resume and driver unload bugs > > (rev3) > > URL : https://patchwork.freedesktop.org/series/5856/ > > State : failure > > > > == Summary == > > > > Series 5856v3 drm/i915: Fix a few suspend/resume and driver unload > > bugs > > http://patchwork.freedesktop.org/api/1.0/series/5856/revisions/3/mbox > > / > > > > Test gem_exec_whisper: > > Subgroup basic: > > incomplete -> PASS (bdw-nuci7) > > Test kms_flip: > > Subgroup basic-flip-vs-dpms: > > pass -> DMESG-WARN (skl-i7k-2) > > Pre-existing issue from an earlier CI run, intel_atomic_commit() > failure during DPMS set property followed by a wait for vblank timeout: > http://benchsrv.fi.intel.com//archive/results/CI_IGT_test/CI_DRM_1177/skl-i7k-2/html/skl-i7k-2@CI_DRM_1177@1/igt@kms_flip@xxxxxxxxxxxxxxxxxxxxxxx > > I opened a new bug for this: > https://bugs.freedesktop.org/show_bug.cgi?id=94992 > > > Subgroup basic-flip-vs-modeset: > > pass -> DMESG-WARN (skl-i7k-2) > Pre-existing issue from an earlier CI run, intel_atomic_commit() > failure during set CRTC IOCTL followed by a wait for vblank timeout: > http://benchsrv.fi.intel.com//archive/results/CI_IGT_test/CI_DRM_1224/skl-i7k-2/html/skl-i7k-2@CI_DRM_1224@1/igt@kms_flip@xxxxxxxxxxxxxxxxxxxxxxxxxx > > I opened a new bug for this: > https://bugs.freedesktop.org/show_bug.cgi?id=94993 > > > Subgroup basic-flip-vs-wf_vblank: > > pass -> FAIL (snb-x220t) > > Pre-existing 1 frame jitter bug: > https://bugs.freedesktop.org/show_bug.cgi?id=94294 > > > Test kms_pipe_crc_basic: > > Subgroup read-crc-pipe-c: > > pass -> SKIP (hsw-brixbox) > > Looks like a problem with detecting the display output (HDMI): > """ > Test requirement not met in function test_read_crc, file kms_pipe_crc_basic.c:178: > Test requirement: valid_connectors > No connector found for pipe 2 > """ > > Maybe the live status check is acting up? There were previous cases > where CI didn't run this test on hsw-brixbox: > http://benchsrv.fi.intel.com/archive/results/CI_IGT_test/igt@kms_pipe_crc_basic@xxxxxxxxxxxxxxxxxxxx Thanks for the reviews, I pushed the patches to -dinq. --Imre > > bdw- > > nuci7 total:203 pass:191 dwarn:0 dfail:0 fail:0 skip:1 > > 2 > > bdw- > > ultra total:203 pass:180 dwarn:0 dfail:0 fail:0 skip:2 > > 3 > > bsw-nuc- > > 2 total:202 pass:163 dwarn:0 dfail:0 fail:0 skip:39 > > byt- > > nuc total:202 pass:164 dwarn:0 dfail:0 fail:0 skip:3 > > 8 > > hsw- > > brixbox total:203 pass:178 dwarn:0 dfail:0 fail:0 skip:2 > > 5 > > hsw- > > gt2 total:203 pass:184 dwarn:0 dfail:0 fail:0 skip:1 > > 9 > > ilk- > > hp8440p total:203 pass:135 dwarn:0 dfail:0 fail:0 skip:6 > > 8 > > ivb- > > t430s total:203 pass:175 dwarn:0 dfail:0 fail:0 skip:2 > > 8 > > skl-i7k- > > 2 total:203 pass:176 dwarn:2 dfail:0 fail:0 skip:25 > > skl- > > nuci5 total:203 pass:192 dwarn:0 dfail:0 fail:0 skip:1 > > 1 > > snb- > > dellxps total:203 pass:165 dwarn:0 dfail:0 fail:0 skip:3 > > 8 > > snb- > > x220t total:203 pass:164 dwarn:0 dfail:0 fail:2 skip:3 > > 7 > > > > Results at /archive/results/CI_IGT_test/Patchwork_1927/ > > > > 78673b24b60c1a884c947ee5a45ad860ca618418 drm-intel-nightly: 2016y- > > 04m-18d-12h-32m-33s UTC integration manifest > > a0cb3b0 drm/i915/gen9: Fix runtime PM refcounting in case DMC > > firmware isn't loaded > > c48ce3c drm/i915/ddi: Fix eDP VDD handling during booting and > > suspend/resume > > e2672e0 drm/i915: Fix system resume if PCI device remained enabled > > 5e7b1ad drm/i915: Fix error path in i915_drm_resume_early > > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/intel-gfx _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
