In BXT DSI there is no regs programmed with few horizontal timings
in Pixels but txbyteclkhs.. So retrieval process adds some
ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs.
Actually here for the given adjusted_mode, we are calculating the
value programmed to the port and then back to the horizontal timing
param in pixels. This is the expected value at the end of get_config,
including roundup errors. And if that is same as retrieved value
from port, then retrieved (HW state) adjusted_mode's horizontal
timings are corrected to match with SW state to nullify the errors.
Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dsi.c | 97 ++++++++++++++++++++++++++++++++++----
1 file changed, 88 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index e0259e6..8a1b872 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -46,6 +46,14 @@ static const struct {
},
};
+/* return pixels in terms of txbyteclkhs */
+static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
+ u16 burst_mode_ratio)
+{
+ return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
+ 8 * 100), lane_count);
+}
+
/* return pixels equvalent to txbyteclkhs */
static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count,
u16 burst_mode_ratio)
@@ -779,11 +787,19 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *adjusted_mode =
&pipe_config->base.adjusted_mode;
+ struct drm_display_mode *adjusted_mode_sw;
+ struct intel_crtc *intel_crtc;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
unsigned int lane_count = intel_dsi->lane_count;
unsigned int bpp, fmt;
enum port port;
u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
+ u16 hfp_sw, hsync_sw, hbp_sw;
+ u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
+ crtc_hblank_start_sw, crtc_hblank_end_sw;
+
+ intel_crtc = to_intel_crtc(encoder->base.crtc);
+ adjusted_mode_sw = &intel_crtc->config->base.adjusted_mode;
/*
* Atleast one port is active as encoder->get_config called only if
@@ -847,8 +863,79 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start;
adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay;
adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
-}
+ /*
+ * In BXT DSI there is no regs programmed with few horizontal timings
+ * in Pixels but txbyteclkhs.. So retrieval process adds some
+ * ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs.
+ * Actually here for the given adjusted_mode, we are calculating the
+ * value programmed to the port and then back to the horizontal timing
+ * param in pixels. This is the expected value, including roundup errors
+ * And if that is same as retrieved value from port, then
+ * (HW state) adjusted_mode's horizontal timings are corrected to
+ * match with SW state to nullify the errors.
+ */
+ /* Calculating the value programmed to the Port register */
+ hfp_sw = adjusted_mode_sw->crtc_hsync_start -
+ adjusted_mode_sw->crtc_hdisplay;
+ hsync_sw = adjusted_mode_sw->crtc_hsync_end -
+ adjusted_mode_sw->crtc_hsync_start;
+ hbp_sw = adjusted_mode_sw->crtc_htotal -
+ adjusted_mode_sw->crtc_hsync_end;
+
+ if (intel_dsi->dual_link) {
+ hfp_sw /= 2;
+ hsync_sw /= 2;
+ hbp_sw /= 2;
+ }
+
+ hfp_sw = txbyteclkhs(hfp_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hsync_sw = txbyteclkhs(hsync_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hbp_sw = txbyteclkhs(hbp_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+
+ /* Reverse calculating the adjusted mode parameters from port reg vals*/
+ hfp_sw = pixels_from_txbyteclkhs(hfp_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hsync_sw = pixels_from_txbyteclkhs(hsync_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+ hbp_sw = pixels_from_txbyteclkhs(hbp_sw, bpp, lane_count,
+ intel_dsi->burst_mode_ratio);
+
+ if (intel_dsi->dual_link) {
+ hfp_sw *= 2;
+ hsync_sw *= 2;
+ hbp_sw *= 2;
+ }
+
+ crtc_htotal_sw = adjusted_mode_sw->crtc_hdisplay + hfp_sw +
+ hsync_sw + hbp_sw;
+ crtc_hsync_start_sw = hfp_sw + adjusted_mode_sw->crtc_hdisplay;
+ crtc_hsync_end_sw = hsync_sw + crtc_hsync_start_sw;
+ crtc_hblank_start_sw = adjusted_mode_sw->crtc_hdisplay;
+ crtc_hblank_end_sw = crtc_htotal_sw;
+
+ if (adjusted_mode->crtc_htotal == crtc_htotal_sw)
+ adjusted_mode->crtc_htotal = adjusted_mode_sw->crtc_htotal;
+
+ if (adjusted_mode->crtc_hsync_start == crtc_hsync_start_sw)
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode_sw->crtc_hsync_start;
+
+ if (adjusted_mode->crtc_hsync_end == crtc_hsync_end_sw)
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode_sw->crtc_hsync_end;
+
+ if (adjusted_mode->crtc_hblank_start == crtc_hblank_start_sw)
+ adjusted_mode->crtc_hblank_start =
+ adjusted_mode_sw->crtc_hblank_start;
+
+ if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw)
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode_sw->crtc_hblank_end;
+}
static void intel_dsi_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
@@ -917,14 +1004,6 @@ static u16 txclkesc(u32 divider, unsigned int us)
}
}
-/* return pixels in terms of txbyteclkhs */
-static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
- u16 burst_mode_ratio)
-{
- return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
- 8 * 100), lane_count);
-}
-
static void set_dsi_timings(struct drm_encoder *encoder,
const struct drm_display_mode *adjusted_mode)
{
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
