Call pwm_apply_args() just after requesting the PWM device so that the polarity and period are initialized according to the information provided in pwm_args. This is an intermediate state, and pwm_apply_args() should be dropped as soon as the atomic PWM infrastructure is in place and the driver makes use of it. Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> --- drivers/video/backlight/lm3630a_bl.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c index 3d16bd6..60d6c2a 100644 --- a/drivers/video/backlight/lm3630a_bl.c +++ b/drivers/video/backlight/lm3630a_bl.c @@ -424,6 +424,12 @@ static int lm3630a_probe(struct i2c_client *client, dev_err(&client->dev, "fail : get pwm device\n"); return PTR_ERR(pchip->pwmd); } + + /* + * FIXME: pwm_apply_args() should be removed when switching to + * the atomic PWM API. + */ + pwm_apply_args(pchip->pwmd); } /* interrupt enable : irq 0 is not allowed */ -- 2.5.0 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx