With the removal of cs support this is no longer reachable.
Can be revived if needed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 5 -
drivers/gpu/drm/i915/intel_display.c | 259 -----------------------------------
2 files changed, 264 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7927bd667a6d..3612201af119 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -601,11 +601,6 @@ struct drm_i915_display_funcs {
void (*audio_codec_disable)(struct intel_encoder *encoder);
void (*fdi_link_train)(struct drm_crtc *crtc);
void (*init_clock_gating)(struct drm_device *dev);
- int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_request *req,
- uint64_t gtt_offset);
void (*hpd_irq_setup)(struct drm_device *dev);
/* clock updates for mode set */
/* cursor updates */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 45fd84ebaccf..581fe054b240 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11041,237 +11041,6 @@ void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
do_intel_finish_page_flip(dev, crtc);
}
-static int intel_gen2_queue_flip(struct drm_device *dev,
- struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_request *req,
- uint64_t gtt_offset)
-{
- struct intel_engine_cs *engine = req->engine;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- u32 flip_mask;
- int ret;
-
- ret = intel_ring_begin(req, 6);
- if (ret)
- return ret;
-
- /* Can't queue multiple flips, so wait for the previous
- * one to finish before executing the next.
- */
- if (intel_crtc->plane)
- flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
- else
- flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
- intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
- intel_ring_emit(engine, MI_NOOP);
- intel_ring_emit(engine, MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- intel_ring_emit(engine, fb->pitches[0]);
- intel_ring_emit(engine, gtt_offset);
- intel_ring_emit(engine, 0); /* aux display base address, unused */
-
- return 0;
-}
-
-static int intel_gen3_queue_flip(struct drm_device *dev,
- struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_request *req,
- uint64_t gtt_offset)
-{
- struct intel_engine_cs *engine = req->engine;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- u32 flip_mask;
- int ret;
-
- ret = intel_ring_begin(req, 6);
- if (ret)
- return ret;
-
- if (intel_crtc->plane)
- flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
- else
- flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
- intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
- intel_ring_emit(engine, MI_NOOP);
- intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- intel_ring_emit(engine, fb->pitches[0]);
- intel_ring_emit(engine, gtt_offset);
- intel_ring_emit(engine, MI_NOOP);
-
- return 0;
-}
-
-static int intel_gen4_queue_flip(struct drm_device *dev,
- struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_request *req,
- uint64_t gtt_offset)
-{
- struct intel_engine_cs *engine = req->engine;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- uint32_t pf, pipesrc;
- int ret;
-
- ret = intel_ring_begin(req, 4);
- if (ret)
- return ret;
-
- /* i965+ uses the linear or tiled offsets from the
- * Display Registers (which do not change across a page-flip)
- * so we need only reprogram the base address.
- */
- intel_ring_emit(engine, MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- intel_ring_emit(engine, fb->pitches[0]);
- intel_ring_emit(engine, gtt_offset | obj->tiling_mode);
-
- /* XXX Enabling the panel-fitter across page-flip is so far
- * untested on non-native modes, so ignore it for now.
- * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
- */
- pf = 0;
- pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
- intel_ring_emit(engine, pf | pipesrc);
-
- return 0;
-}
-
-static int intel_gen6_queue_flip(struct drm_device *dev,
- struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_request *req,
- uint64_t gtt_offset)
-{
- struct intel_engine_cs *engine = req->engine;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- uint32_t pf, pipesrc;
- int ret;
-
- ret = intel_ring_begin(req, 4);
- if (ret)
- return ret;
-
- intel_ring_emit(engine, MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- intel_ring_emit(engine, fb->pitches[0] | obj->tiling_mode);
- intel_ring_emit(engine, gtt_offset);
-
- /* Contrary to the suggestions in the documentation,
- * "Enable Panel Fitter" does not seem to be required when page
- * flipping with a non-native mode, and worse causes a normal
- * modeset to fail.
- * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
- */
- pf = 0;
- pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
- intel_ring_emit(engine, pf | pipesrc);
-
- return 0;
-}
-
-static int intel_gen7_queue_flip(struct drm_device *dev,
- struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- struct drm_i915_gem_object *obj,
- struct drm_i915_gem_request *req,
- uint64_t gtt_offset)
-{
- struct intel_engine_cs *engine = req->engine;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- uint32_t plane_bit = 0;
- int len, ret;
-
- switch (intel_crtc->plane) {
- case PLANE_A:
- plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
- break;
- case PLANE_B:
- plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
- break;
- case PLANE_C:
- plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
- break;
- default:
- WARN_ONCE(1, "unknown plane in flip command\n");
- return -ENODEV;
- }
-
- len = 4;
- if (engine->id == RCS) {
- len += 6;
- /*
- * On Gen 8, SRM is now taking an extra dword to accommodate
- * 48bits addresses, and we need a NOOP for the batch size to
- * stay even.
- */
- if (IS_GEN8(dev))
- len += 2;
- }
-
- /*
- * BSpec MI_DISPLAY_FLIP for IVB:
- * "The full packet must be contained within the same cache line."
- *
- * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
- * cacheline, if we ever start emitting more commands before
- * the MI_DISPLAY_FLIP we may need to first emit everything else,
- * then do the cacheline alignment, and finally emit the
- * MI_DISPLAY_FLIP.
- */
- ret = intel_ring_cacheline_align(req);
- if (ret)
- return ret;
-
- ret = intel_ring_begin(req, len);
- if (ret)
- return ret;
-
- /* Unmask the flip-done completion message. Note that the bspec says that
- * we should do this for both the BCS and RCS, and that we must not unmask
- * more than one flip event at any time (or ensure that one flip message
- * can be sent by waiting for flip-done prior to queueing new flips).
- * Experimentation says that BCS works despite DERRMR masking all
- * flip-done completion events and that unmasking all planes at once
- * for the RCS also doesn't appear to drop events. Setting the DERRMR
- * to zero does lead to lockups within MI_DISPLAY_FLIP.
- */
- if (engine->id == RCS) {
- intel_ring_emit(engine, MI_LOAD_REGISTER_IMM(1));
- intel_ring_emit_reg(engine, DERRMR);
- intel_ring_emit(engine, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
- DERRMR_PIPEB_PRI_FLIP_DONE |
- DERRMR_PIPEC_PRI_FLIP_DONE));
- if (IS_GEN8(dev))
- intel_ring_emit(engine, MI_STORE_REGISTER_MEM_GEN8 |
- MI_SRM_LRM_GLOBAL_GTT);
- else
- intel_ring_emit(engine, MI_STORE_REGISTER_MEM |
- MI_SRM_LRM_GLOBAL_GTT);
- intel_ring_emit_reg(engine, DERRMR);
- intel_ring_emit(engine, engine->scratch.gtt_offset + 256);
- if (IS_GEN8(dev)) {
- intel_ring_emit(engine, 0);
- intel_ring_emit(engine, MI_NOOP);
- }
- }
-
- intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 | plane_bit);
- intel_ring_emit(engine, (fb->pitches[0] | obj->tiling_mode));
- intel_ring_emit(engine, gtt_offset);
- intel_ring_emit(engine, (MI_NOOP));
-
- return 0;
-}
-
static void intel_mmio_flip_work_func(struct work_struct *w)
{
struct intel_flip_work *work =
@@ -14882,34 +14651,6 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
dev_priv->display.modeset_calc_cdclk =
broxton_modeset_calc_cdclk;
}
-
- switch (INTEL_INFO(dev_priv)->gen) {
- case 2:
- dev_priv->display.queue_flip = intel_gen2_queue_flip;
- break;
-
- case 3:
- dev_priv->display.queue_flip = intel_gen3_queue_flip;
- break;
-
- case 4:
- case 5:
- dev_priv->display.queue_flip = intel_gen4_queue_flip;
- break;
-
- case 6:
- dev_priv->display.queue_flip = intel_gen6_queue_flip;
- break;
- case 7:
- case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
- dev_priv->display.queue_flip = intel_gen7_queue_flip;
- break;
- case 9:
- /* Drop through - unsupported since execlist only. */
- default:
- /* Default just returns -ENODEV to indicate unsupported */
- break;
- }
}
/*
--
2.1.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
