On Fri, 08 Apr 2016, ville.syrjala@xxxxxxxxxxxxxxx wrote: > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > We've had problems on several occasions with using the panel type > from the VBT block 40. Usually it seems to be 2, which often > doesn't give us the correct timings for the panel. After some > more digging I found a way to get a panel type via the OpRegion > SWSCI GBDA "Get Panel Details" method. Let's try to use it. > > The spec has this to say about the output: > "Bits [15:8] - Panel Type > Bits contain the panel type user setting from CMOS > 00h = Not Valid, use default Panel Type & Timings from VBT > 01h - 0Fh = Panel Number" > > The other bits in the output don't look relevant for the problem at > hand. > > The input is specified as: > "Bits [31:4] - Reserved > Reserved (must be zero) > Bits [3:0] - Panel Number > These bits contain the sequential index of Panel, starting at 0 and > counting upwards from the first integrated Internal Flat-Panel Display > Encoder present, and then from the first external Display Encoder > (e.g., S/DVO-B then S/DVO-C) which supports Internal Flat-Panels. > 0h - 0Fh = Panel number" > > For now I've just hardcoded the input panel number as 0. That would seem > like a decent choise for LVDS. Not so sure about eDP when port != A. Frankly, I didn't understand the point of the input parameter for figuring out the output. The spec is written for someone who already knows what they're doing... > > Cc: Rob Kramer <rob@xxxxxxxxxxxxxxxxxx> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825 > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > --- > drivers/gpu/drm/i915/i915_drv.h | 5 +++++ > drivers/gpu/drm/i915/intel_bios.c | 13 ++++++++++--- > drivers/gpu/drm/i915/intel_opregion.c | 13 +++++++++++++ > 3 files changed, 28 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h > index 53ace572b292..533263a7a12d 100644 > --- a/drivers/gpu/drm/i915/i915_drv.h > +++ b/drivers/gpu/drm/i915/i915_drv.h > @@ -3421,6 +3421,7 @@ extern int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder, > bool enable); > extern int intel_opregion_notify_adapter(struct drm_device *dev, > pci_power_t state); > +extern int intel_opregion_get_panel_type(struct drm_device *dev); > #else > static inline int intel_opregion_setup(struct drm_device *dev) { return 0; } > static inline void intel_opregion_init(struct drm_device *dev) { return; } > @@ -3436,6 +3437,10 @@ intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state) > { > return 0; > } > +static inline int intel_opregion_get_panel_type(struct drm_device *dev) > +{ > + return 0; > +} > #endif > > /* intel_acpi.c */ > diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c > index d9568be4b33b..718e49931b5f 100644 > --- a/drivers/gpu/drm/i915/intel_bios.c > +++ b/drivers/gpu/drm/i915/intel_bios.c > @@ -205,16 +205,23 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, > struct drm_display_mode *panel_fixed_mode; > int panel_type; > int drrs_mode; > + int ret; > > lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); > if (!lvds_options) > return; > > dev_priv->vbt.lvds_dither = lvds_options->pixel_dither; > - if (lvds_options->panel_type > 0xf) > - return; > > - panel_type = lvds_options->panel_type; > + ret = intel_opregion_get_panel_type(dev_priv->dev); > + if (ret >= 0x1 && ret <= 0xf) { Undecided whether I'd like to have this check within intel_opregion_get_panel_type(). Just make that return 0 for "use vbt" (and CONFIG_ACPI=n), and valid stuff otherwise? *shrug* > + panel_type = ret; > + } else { > + if (lvds_options->panel_type > 0xf) > + return; > + panel_type = lvds_options->panel_type; > + } > + If this actually works, I'd like to have some debug logging for pretty much all the code paths here. Other than that, seems fine. BR, Jani. > dev_priv->vbt.panel_type = panel_type; > > drrs_mode = (lvds_options->dps_panel_type_bits > diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c > index c15718b4862a..5e17fa5dc869 100644 > --- a/drivers/gpu/drm/i915/intel_opregion.c > +++ b/drivers/gpu/drm/i915/intel_opregion.c > @@ -1024,3 +1024,16 @@ err_out: > memunmap(base); > return err; > } > + > +int > +intel_opregion_get_panel_type(struct drm_device *dev) > +{ > + u32 panel_details; > + int ret; > + > + ret = swsci(dev, SWSCI_GBDA_PANEL_DETAILS, 0x0, &panel_details); > + if (ret) > + return ret; > + > + return (panel_details >> 8) & 0xff; > +} -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
