Sink count was read for eDP as well as DP. But in some cases
the sink count for eDP is received as zero, as against the
expected non zero value. This is seen in:
commit 30d9aa4265fe4b2b28239934770b2c2d59858df3
Author: Shubhangi Shrivastava <shubhangi.shrivastava@xxxxxxxxx>
Date: Wed Mar 30 18:05:25 2016 +0530
drm/i915: Read sink_count dpcd always
This patch fixes the issue by removing the sink count check
for both DP and eDP and allows it to be checked only for DP.
Fixes: 30d9aa4265fe ("drm/i915: Read sink_count dpcd always")
Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@xxxxxxxxx>
Signed-off-by: Shubhangi Shrivastava <shubhangi.shrivastava@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index da0c3d2..bd5287b 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3806,7 +3806,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
* downstream port information. So, an early return here saves
* time from performing other operations which are not required.
*/
- if (!intel_dp->sink_count)
+ if (!is_edp(intel_dp) && !intel_dp->sink_count)
return false;
/* Check if the panel supports PSR */
@@ -4345,7 +4345,8 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp)
/* If we're HPD-aware, SINK_COUNT changes dynamically */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
- intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) {
+ intel_dp->downstream_ports[0] & DP_DS_PORT_HPD &&
+ !is_edp(intel_dp)) {
return intel_dp->sink_count ?
connector_status_connected : connector_status_disconnected;
--
2.6.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
