On Wed, Apr 06, 2016 at 08:22:56PM +0300, Imre Deak wrote:
> On ti, 2016-04-05 at 14:55 -0700, Matt Roper wrote:
> > On Tue, Apr 05, 2016 at 02:37:19PM -0700, Matt Roper wrote:
> > > intel_update_max_cdclk() doesn't have a switch case for Broxton, so
> > > dev_priv->max_cdclk_freq gets set to whatever clock frequency we're
> > > currently running at (e.g., 144 MHz) rather than the true
> > > maximum. This
> > > causes our max dotclock to also be set too low and in turn leads
> > > mode
> > > verification to reject perfectly valid modes while loading EDID
> > > firmware
> > > blobs.
> > >
> > > Cc: Imre Deak <imre.deak@xxxxxxxxx>
> > > Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
> > > ---
> >
> > One thing I should have mentioned is that it's unclear to me whether we
> > should be looking at the cdclk limit bits in the DFSM register like we
> > do on SKL/KBL. The bspec seems to indicate that the register in general
> > applies to gen9, including BXT, but the actual meaning of the bits
> > doesn't match up with the frequencies we have on BXT.
>
> Yes, vendors could restrict the max CDCLK frequency via some method,
> but we don't have that mechanism in place anyway and we would use the
> hard-coded 624MHz if BIOS didn't enable CDCLK. So this is a correct
> fix for now:
>
> Reviewed-by: Imre Deak <imre.deak@xxxxxxxxx>
Thanks for the review. Pushed to dinq.
Matt
>
> >
> >
> > Matt
> >
> > > drivers/gpu/drm/i915/intel_display.c | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > > b/drivers/gpu/drm/i915/intel_display.c
> > > index af74cdb..924d851 100644
> > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > @@ -5261,6 +5261,8 @@ static void intel_update_max_cdclk(struct
> > > drm_device *dev)
> > > dev_priv->max_cdclk_freq = 450000;
> > > else
> > > dev_priv->max_cdclk_freq = 337500;
> > > + } else if (IS_BROXTON(dev)) {
> > > + dev_priv->max_cdclk_freq = 624000;
> > > } else if (IS_BROADWELL(dev)) {
> > > /*
> > > * FIXME with extra cooling we can allow
> > > --
> > > 2.1.4
> > >
> >
--
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
