From: "Kumar, Mahesh" <mahesh1.kumar@xxxxxxxxx>
Use plane size for relative data rate calculation. don't always use
pipe source width & height.
adjust height & width according to rotation.
use plane size for watermark calculations also.
v2: Address Matt's comments.
Use intel_plane_state->visible to avoid divide-by-zero error.
Where FB was present but not visible so causing total data rate to
be zero, hence divide-by-zero.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93917
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94044
Signed-off-by: Kumar, Mahesh <mahesh1.kumar@xxxxxxxxx>
Reviewed-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
---
This patch is included as part of a couple pending watermark series that are
still under review, but it's an important fix on its own, so we'd like to merge
it early. I reviewed the original patch from Mahesh a while back and have been
keeping it rebased since that time.
drivers/gpu/drm/i915/intel_pm.c | 42 +++++++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 7fccf3b..521eed4 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2937,25 +2937,28 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
const struct drm_plane_state *pstate,
int y)
{
- struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
+ struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
struct drm_framebuffer *fb = pstate->fb;
+ uint32_t width = 0, height = 0;
+
+ width = drm_rect_width(&intel_pstate->src) >> 16;
+ height = drm_rect_height(&intel_pstate->src) >> 16;
+
+ if (intel_rotation_90_or_270(pstate->rotation))
+ swap(width, height);
/* for planar format */
if (fb->pixel_format == DRM_FORMAT_NV12) {
if (y) /* y-plane data rate */
- return intel_crtc->config->pipe_src_w *
- intel_crtc->config->pipe_src_h *
+ return width * height *
drm_format_plane_cpp(fb->pixel_format, 0);
else /* uv-plane data rate */
- return (intel_crtc->config->pipe_src_w/2) *
- (intel_crtc->config->pipe_src_h/2) *
+ return (width / 2) * (height / 2) *
drm_format_plane_cpp(fb->pixel_format, 1);
}
/* for packed formats */
- return intel_crtc->config->pipe_src_w *
- intel_crtc->config->pipe_src_h *
- drm_format_plane_cpp(fb->pixel_format, 0);
+ return width * height * drm_format_plane_cpp(fb->pixel_format, 0);
}
/*
@@ -3034,8 +3037,9 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
struct drm_framebuffer *fb = plane->state->fb;
int id = skl_wm_plane_id(intel_plane);
- if (fb == NULL)
+ if (!to_intel_plane_state(plane->state)->visible)
continue;
+
if (plane->type == DRM_PLANE_TYPE_CURSOR)
continue;
@@ -3061,7 +3065,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
uint16_t plane_blocks, y_plane_blocks = 0;
int id = skl_wm_plane_id(intel_plane);
- if (pstate->fb == NULL)
+ if (!to_intel_plane_state(pstate)->visible)
continue;
if (plane->type == DRM_PLANE_TYPE_CURSOR)
continue;
@@ -3184,26 +3188,36 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
{
struct drm_plane *plane = &intel_plane->base;
struct drm_framebuffer *fb = plane->state->fb;
+ struct intel_plane_state *intel_pstate =
+ to_intel_plane_state(plane->state);
uint32_t latency = dev_priv->wm.skl_latency[level];
uint32_t method1, method2;
uint32_t plane_bytes_per_line, plane_blocks_per_line;
uint32_t res_blocks, res_lines;
uint32_t selected_result;
uint8_t cpp;
+ uint32_t width = 0, height = 0;
- if (latency == 0 || !cstate->base.active || !fb)
+ if (latency == 0 || !cstate->base.active || !intel_pstate->visible)
return false;
+ width = drm_rect_width(&intel_pstate->src) >> 16;
+ height = drm_rect_height(&intel_pstate->src) >> 16;
+
+ if (intel_rotation_90_or_270(plane->state->rotation))
+ swap(width, height);
+
cpp = drm_format_plane_cpp(fb->pixel_format, 0);
method1 = skl_wm_method1(skl_pipe_pixel_rate(cstate),
cpp, latency);
method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate),
cstate->base.adjusted_mode.crtc_htotal,
- cstate->pipe_src_w,
- cpp, fb->modifier[0],
+ width,
+ cpp,
+ fb->modifier[0],
latency);
- plane_bytes_per_line = cstate->pipe_src_w * cpp;
+ plane_bytes_per_line = width * cpp;
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
