Add support for CHV gpio programming in DSI gpio elements.
v2: Overhaul macros according to Ville's review.
[Rewritten by Jani, based on earlier work by Yogesh and Deepak.]
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@xxxxxxxxx>
Signed-off-by: Deepak M <m.deepak@xxxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 64 ++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index 98583f37f5c7..5e2c31d9a748 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -96,6 +96,24 @@ static struct gpio_map vlv_gpio_table[] = {
{ .port = IOSF_PORT_GPIO_NC, .base_offset = VLV_GPIO_NC_11_PANEL1_BKLTCTL },
};
+#define CHV_GPIO_IDX_START_N 0
+#define CHV_GPIO_IDX_START_SE 73
+#define CHV_GPIO_IDX_START_SW 100
+#define CHV_GPIO_IDX_START_E 198
+
+#define CHV_VBT_MAX_PINS_PER_FMLY 15
+
+#define CHV_GPIO_PAD_CFG0(f, i) (0x4400 + (f) * 0x400 + (i) * 8)
+#define CHV_GPIO_PAD_CFG1(f, i) (0x4400 + (f) * 0x400 + (i) * 8 + 4)
+
+#define CHV_GPIO_CFGLOCK (1 << 31)
+#define CHV_GPIO_GPIOEN (1 << 15)
+#define CHV_GPIO_GPIOCFG_GPIO (0 << 8)
+#define CHV_GPIO_GPIOCFG_GPO (1 << 8)
+#define CHV_GPIO_GPIOCFG_GPI (2 << 8)
+#define CHV_GPIO_GPIOCFG_HIZ (3 << 8)
+#define CHV_GPIO_GPIOTXSTATE(state) ((!!(state)) << 1)
+
static inline enum port intel_dsi_seq_port_to_port(u8 port)
{
return port ? PORT_C : PORT_A;
@@ -233,6 +251,50 @@ static void vlv_exec_gpio(struct drm_i915_private *dev_priv,
mutex_unlock(&dev_priv->sb_lock);
}
+static void chv_exec_gpio(struct drm_i915_private *dev_priv,
+ u8 gpio_source, u8 gpio_index, bool value)
+{
+ u16 cfg0, cfg1;
+ u16 family_num;
+ u8 port;
+
+ if (dev_priv->vbt.dsi.seq_version >= 3) {
+ if (gpio_index >= CHV_GPIO_IDX_START_E) {
+ gpio_index -= CHV_GPIO_IDX_START_E;
+ port = CHV_IOSF_PORT_GPIO_E;
+ } else if (gpio_index >= CHV_GPIO_IDX_START_SW) {
+ gpio_index -= CHV_GPIO_IDX_START_SW;
+ port = CHV_IOSF_PORT_GPIO_SW;
+ } else if (gpio_index >= CHV_GPIO_IDX_START_SE) {
+ gpio_index -= CHV_GPIO_IDX_START_SE;
+ port = CHV_IOSF_PORT_GPIO_SE;
+ } else {
+ port = CHV_IOSF_PORT_GPIO_N;
+ }
+ } else {
+ if (gpio_source == 0) {
+ port = IOSF_PORT_GPIO_NC;
+ } else if (gpio_source == 1) {
+ port = IOSF_PORT_GPIO_SC;
+ } else {
+ DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
+ return;
+ }
+ }
+
+ family_num = gpio_index / CHV_VBT_MAX_PINS_PER_FMLY;
+ gpio_index = gpio_index % CHV_VBT_MAX_PINS_PER_FMLY;
+
+ cfg0 = CHV_GPIO_PAD_CFG0(family_num, gpio_index);
+ cfg1 = CHV_GPIO_PAD_CFG1(family_num, gpio_index);
+
+ mutex_lock(&dev_priv->sb_lock);
+ vlv_iosf_sb_write(dev_priv, port, cfg0, 0);
+ vlv_iosf_sb_write(dev_priv, port, cfg1,
+ CHV_GPIO_GPIOCFG_HIZ | CHV_GPIO_GPIOTXSTATE(value));
+ mutex_unlock(&dev_priv->sb_lock);
+}
+
static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_device *dev = intel_dsi->base.base.dev;
@@ -256,6 +318,8 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
if (IS_VALLEYVIEW(dev_priv))
vlv_exec_gpio(dev_priv, gpio_source, gpio_index, value);
+ else if (IS_CHERRYVIEW(dev_priv))
+ chv_exec_gpio(dev_priv, gpio_source, gpio_index, value);
else
DRM_DEBUG_KMS("GPIO element not supported on this platform\n");
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
