On Fri, Mar 18, 2016 at 01:11:10PM +0200, Jani Nikula wrote:
> In sequence block v2, and only in v2, the gpio source (i.e. IOSF port)
> is specified separately.
>
> v2: initialize gpio_source to 0 and handle v1 and v2 in the same branch
>
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 22 ++++++++++++++++++----
> 1 file changed, 18 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> index f687b2e9d8ca..af1a47b5224f 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> @@ -198,7 +198,7 @@ static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data)
>
> static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
> {
> - u8 gpio_index, action;
> + u8 gpio_source, gpio_index, action, port;
> u16 function, pad;
> u32 val;
> struct drm_device *dev = intel_dsi->base.base.dev;
> @@ -209,6 +209,12 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
>
> gpio_index = *data++;
>
> + /* gpio source in sequence v2 only */
> + if (dev_priv->vbt.dsi.seq_version == 2)
> + gpio_source = (*data >> 1) & 3;
> + else
> + gpio_source = 0;
> +
> /* pull up/down */
> action = *data++ & 1;
>
> @@ -225,6 +231,15 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
> if (dev_priv->vbt.dsi.seq_version >= 3) {
> DRM_DEBUG_KMS("GPIO element v3 not supported\n");
> goto out;
> + } else {
> + if (gpio_source == 0) {
> + port = IOSF_PORT_GPIO_NC;
> + } else if (gpio_source == 1) {
> + port = IOSF_PORT_GPIO_SC;
> + } else {
> + DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
> + goto out;
> + }
> }
>
> function = gtable[gpio_index].function_reg;
> @@ -234,15 +249,14 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
> if (!gtable[gpio_index].init) {
> /* program the function */
> /* FIXME: remove constant below */
> - vlv_iosf_sb_write(dev_priv, IOSF_PORT_GPIO_NC, function,
> - 0x2000CC00);
> + vlv_iosf_sb_write(dev_priv, port, function, 0x2000CC00);
> gtable[gpio_index].init = 1;
> }
>
> val = 0x4 | action;
>
> /* pull up/down */
> - vlv_iosf_sb_write(dev_priv, IOSF_PORT_GPIO_NC, pad, val);
> + vlv_iosf_sb_write(dev_priv, port, pad, val);
> mutex_unlock(&dev_priv->sb_lock);
>
> out:
> --
> 2.1.4
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
