On Thursday 31 March 2016 12:34 AM, Daniel Vetter wrote:
On Wed, Mar 30, 2016 at 07:49:40PM +0530, Ramalingam C wrote:
On Wednesday 30 March 2016 05:02 PM, Daniel Vetter wrote:
On Tue, Mar 29, 2016 at 11:04:51PM +0530, Ramalingam C wrote:
At BXT DSI, PIPE registers are inactive. So we can't get the
PIPE's mode parameters from them. The possible option is
retriving them from the PORT registers. But mode timing
parameters are progammed to port registers interms of byteclocks.
The formula used to convert the pixels interms of byteclk is
DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
8 * 100), lane_count);
So we retrieve them, interms of pixels as
DIV_ROUND_UP((clk_hs * lane_count * 8 * 100),
(bpp * burst_mode_ratio));
Due to the multiple DIV_ROUND_UP in both formulas we get the worst
case delta in the retrieved PIPE's timing parameter as below
DIV_ROUND_UP((8 * intel_dsi->lane_count * 100),
(dsi_pixel_format_bpp(intel_dsi->pixel_format) *
intel_dsi->burst_mode_ratio)))
This converson of byteclk to pixel is required for hsync, hfp and hbp.
Which intern impacts horrizontal timing parameters. At worst case to
get htotal all there parameters are added with hactive.
Hence delta will be 3 times of above formula. Hence this value is
considered as tolerance for pipe_config comparison, in case of BXT DSI.
Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
This is the wrong way round imo, better would be to adjust the adjusted
mode in the bxt dsi compute_config function to match the hw granularity.
Stuff _really_ should match exactly, the fuzzy clock matching is mostly
because our clock cod is a mess, and we can't/don't properly
forward-compuate the actual clock timings we program into the hardware.
-Daniel
Daniel, I got your point. But the problem will be that difficulty(even if
possible) in adjusting the adjusted mode parameters.
Reason is we are not programing the mode parameter as such. We will derive
the hfp, hsync and hbp from
hsync_start, hsync_end, hdisplay and htotal. These will be adjusted(divided
by 2) for dual link scenario.
And then resultant will go into the conversion as mentioned in the commit
message (two DIV_ROUND_UP onwards
and one DIV_ROUND_UP backwards). For this we have to make the parameter
divisible by three different factors.
So IMHO, even if this is possible, it will look more messy.
Predicting the max error and tolerating it in pipe_config_compare will be
the straight forward and more reasonable.
Please let me know if i can go ahead in this approach.
Yeah I discussed this some more with Jani on irc. I'd say we should store
this adjusted horizontal timings (the ones fudged with burst_mode_ratio,
lane_count, dual-link and all these things applied) into
crtc_state->base.adjusted_mode. And then ofc also read those values out.
The overall idea of the state verify/compare logic is that we start out
with requested state from userspace, then derive the real hw state. And
then compare that computed hw state with what's there already. Except for
clocks, where there's special reasons, we never go back, since going back
requires us to apply a range. This is the only way to guarnatee that "hw
has the same exact mode programmed in both cases" iff "intel_crtc_state
matches per intel_crtc_config_compare".
state->adjusted_mode is never exposed to userspace, so there's no problem
if it's has "strange" values. And we already have pipe_src_h/w to express
the logical input rectangle.
The idea is similar to how we set adjusted_mode.flags to what we actually
program, instead of trying to make something up that's not perfectly
accurate.
-Daniel
Daniel,
I have tested by adjusting the adjusted_mode in set_dsi_timings()
instead of intel_dsi_compute_config().
Reason is if we modify the adjusted mode at intel_dsi_compute_config()
itself, then modified value will
be taken as input for set_dsi_timings. Hence the get_config will deviate
further. I hope this should be fine with you and Jani.
This will work out, if set_dsi_timings() is called after the
dsi_compute_config() on every suspend and resume or modeset.
I will verify this on Android once and update.
Please share your view on this, so that can update the patch with
corresponding changes.
---
Reviewed at https://lists.freedesktop.org/archives/intel-gfx/2016-March/089548.html
drivers/gpu/drm/i915/intel_display.c | 62 +++++++++++++++++++++++++++++++---
1 file changed, 57 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c0627d6..282f036 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12557,6 +12557,9 @@ intel_pipe_config_compare(struct drm_device *dev,
bool adjust)
{
bool ret = true;
+ struct intel_crtc *crtc = to_intel_crtc(current_config->base.crtc);
+ struct intel_encoder *intel_encoder;
+ struct intel_dsi *intel_dsi = NULL;
#define INTEL_ERR_OR_DBG_KMS(fmt, ...) \
do { \
@@ -12593,6 +12596,54 @@ intel_pipe_config_compare(struct drm_device *dev,
ret = false; \
}
+/*
+ * In case of BXT DSI, HW pipe_config will be retrieved from the port's timing
+ * configuration. This retrival includes some errors due to the DIV_ROUND_UP.
+ * So we are considering the max possible error at the comparison.
+ */
+/*
+ * htotal = hactive + hfp + hsync + hbp. Here last three lements might have
+ * the converson error, hence we consider the 3 times of error as tolerance.
+ */
+
+#define MAX_BXT_DSI_TIMING_RETRIVAL_ERR \
+ (intel_dsi == NULL ? 0 : \
+ DIV_ROUND_UP((3 * 8 * intel_dsi->lane_count * 100), \
+ (dsi_pixel_format_bpp(intel_dsi->pixel_format) * \
+ intel_dsi->burst_mode_ratio)))
+
+#define BXT_DSI_PIPE_CONF_CHECK_I_RANGE(name) { \
+ for_each_encoder_on_crtc(dev, &crtc->base, \
+ intel_encoder) { \
+ if (intel_encoder->type == INTEL_OUTPUT_DSI) { \
+ intel_dsi = enc_to_intel_dsi(&intel_encoder->base); \
+ } \
+ } \
+ if (!(current_config->name < pipe_config->name && \
+ current_config->name >= (pipe_config->name - \
+ MAX_BXT_DSI_TIMING_RETRIVAL_ERR))) { \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
+ "(expected %i, found %i(Err tolerance considered))\n", \
+ current_config->name, \
+ pipe_config->name); \
+ ret = false; \
+ } \
+}
+
+#define PIPE_CONF_CHECK_I_RANGE(name) { \
+ if (current_config->name != pipe_config->name) { \
+ if (IS_BROXTON(dev) && crtc->config->has_dsi_encoder) { \
+ BXT_DSI_PIPE_CONF_CHECK_I_RANGE(name) \
+ } else { \
+ INTEL_ERR_OR_DBG_KMS("mismatch in " #name " " \
+ "(expected %i, found %i)\n", \
+ current_config->name, \
+ pipe_config->name); \
+ ret = false; \
+ } \
+ } \
+}
+
#define PIPE_CONF_CHECK_M_N(name) \
if (!intel_compare_link_m_n(¤t_config->name, \
&pipe_config->name,\
@@ -12697,11 +12748,11 @@ intel_pipe_config_compare(struct drm_device *dev,
PIPE_CONF_CHECK_I(has_dsi_encoder);
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
- PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
- PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_start);
- PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_end);
- PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_start);
- PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_end);
+ PIPE_CONF_CHECK_I_RANGE(base.adjusted_mode.crtc_htotal);
+ PIPE_CONF_CHECK_I_RANGE(base.adjusted_mode.crtc_hblank_start);
+ PIPE_CONF_CHECK_I_RANGE(base.adjusted_mode.crtc_hblank_end);
+ PIPE_CONF_CHECK_I_RANGE(base.adjusted_mode.crtc_hsync_start);
+ PIPE_CONF_CHECK_I_RANGE(base.adjusted_mode.crtc_hsync_end);
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vdisplay);
PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vtotal);
@@ -12779,6 +12830,7 @@ intel_pipe_config_compare(struct drm_device *dev,
#undef PIPE_CONF_CHECK_X
#undef PIPE_CONF_CHECK_I
+#undef PIPE_CONF_CHECK_I_RANGE
#undef PIPE_CONF_CHECK_P
#undef PIPE_CONF_CHECK_I_ALT
#undef PIPE_CONF_CHECK_FLAGS
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Thanks,
--Ram
--
Thanks,
--Ram
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
