This register is read-only, so we have never actually set OCL2_LDOFUSE_PWR_DIS in it as specified by the specification. Add a code comment about this. I filed a specification update request to clarify this there. CC: Arthur J Runyan <arthur.j.runyan@xxxxxxxxx> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx> --- [ Art, CC'ing you in case you know if this would have an effect on anything. ] --- drivers/gpu/drm/i915/intel_ddi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 2758622..f91306e 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1798,6 +1798,9 @@ static void broxton_phy_init(struct drm_i915_private *dev_priv, * enabled. * TODO: port C is only connected on BXT-P, so on BXT0/1 we should * power down the second channel on PHY0 as well. + * + * FIXME: Clarify programming of the following, the register is + * read-only with bit 6 fixed at 0 at least in stepping A. */ if (phy == DPIO_PHY1) val |= OCL2_LDOFUSE_PWR_DIS; -- 2.5.0 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
