Re: [PATCH v2 1/9] drm/i915/dsi: refer to gpio index instead of gpio to avoid confusion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Housekeeping stuff.

Reviewed-by: Mika Kahola <mika.kahola@xxxxxxxxx>

On Fri, 2016-03-18 at 13:11 +0200, Jani Nikula wrote:
> The DSI sequence blocks contain gpio index references, not actual gpio
> numbers. No functional changes.
> 
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> index 8302a972d2d4..f687b2e9d8ca 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> @@ -198,7 +198,7 @@ static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data)
>  
>  static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
>  {
> -	u8 gpio, action;
> +	u8 gpio_index, action;
>  	u16 function, pad;
>  	u32 val;
>  	struct drm_device *dev = intel_dsi->base.base.dev;
> @@ -207,13 +207,13 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
>  	if (dev_priv->vbt.dsi.seq_version >= 3)
>  		data++;
>  
> -	gpio = *data++;
> +	gpio_index = *data++;
>  
>  	/* pull up/down */
>  	action = *data++ & 1;
>  
> -	if (gpio >= ARRAY_SIZE(gtable)) {
> -		DRM_DEBUG_KMS("unknown gpio %u\n", gpio);
> +	if (gpio_index >= ARRAY_SIZE(gtable)) {
> +		DRM_DEBUG_KMS("unknown gpio index %u\n", gpio_index);
>  		goto out;
>  	}
>  
> @@ -227,16 +227,16 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
>  		goto out;
>  	}
>  
> -	function = gtable[gpio].function_reg;
> -	pad = gtable[gpio].pad_reg;
> +	function = gtable[gpio_index].function_reg;
> +	pad = gtable[gpio_index].pad_reg;
>  
>  	mutex_lock(&dev_priv->sb_lock);
> -	if (!gtable[gpio].init) {
> +	if (!gtable[gpio_index].init) {
>  		/* program the function */
>  		/* FIXME: remove constant below */
>  		vlv_iosf_sb_write(dev_priv, IOSF_PORT_GPIO_NC, function,
>  				  0x2000CC00);
> -		gtable[gpio].init = 1;
> +		gtable[gpio_index].init = 1;
>  	}
>  
>  	val = 0x4 | action;


_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux