The BXT display connections have DSI transcoders A and C that can be
muxed to any pipe, not unlike the eDP transcoder. Add the notion of DSI
transcoders.
The "normal" transcoders A, B and C are not used with BXT DSI, so care
must be taken to avoid accessing those registers with DSI transcoders in
the hardware state readout, modeset, and generally everywhere.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 10 ++++
drivers/gpu/drm/i915/intel_ddi.c | 6 +++
drivers/gpu/drm/i915/intel_display.c | 90 +++++++++++++++++++++++++++++----
drivers/gpu/drm/i915/intel_drv.h | 3 +-
drivers/gpu/drm/i915/intel_dsi.c | 9 ++++
drivers/gpu/drm/i915/intel_runtime_pm.c | 6 +++
6 files changed, 112 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 5e4a42d996d8..0ddd0f492ca9 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -123,6 +123,8 @@ enum transcoder {
TRANSCODER_B,
TRANSCODER_C,
TRANSCODER_EDP,
+ TRANSCODER_DSI_A,
+ TRANSCODER_DSI_C,
I915_MAX_TRANSCODERS
};
@@ -137,11 +139,17 @@ static inline const char *transcoder_name(enum transcoder transcoder)
return "C";
case TRANSCODER_EDP:
return "eDP";
+ case TRANSCODER_DSI_A:
+ return "DSI A";
+ case TRANSCODER_DSI_C:
+ return "DSI C";
default:
return "<invalid>";
}
}
+#define IS_DSI_TRANSCODER(t) ((t) == TRANSCODER_DSI_A || (t) == TRANSCODER_DSI_C)
+
/*
* I915_MAX_PLANES in the enum below is the maximum (across all platforms)
* number of planes per CRTC. Not all platforms really have this many planes,
@@ -192,6 +200,8 @@ enum intel_display_power_domain {
POWER_DOMAIN_TRANSCODER_B,
POWER_DOMAIN_TRANSCODER_C,
POWER_DOMAIN_TRANSCODER_EDP,
+ POWER_DOMAIN_TRANSCODER_DSI_A,
+ POWER_DOMAIN_TRANSCODER_DSI_C,
POWER_DOMAIN_PORT_DDI_A_LANES,
POWER_DOMAIN_PORT_DDI_B_LANES,
POWER_DOMAIN_PORT_DDI_C_LANES,
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 91654ffc3a42..8726711864eb 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1061,6 +1061,8 @@ void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
uint32_t temp;
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP_MST) {
+ WARN_ON(IS_DSI_TRANSCODER(cpu_transcoder));
+
temp = TRANS_MSA_SYNC_CLK;
switch (intel_crtc->config->pipe_bpp) {
case 18:
@@ -1942,6 +1944,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_hdmi *intel_hdmi;
u32 temp, flags = 0;
+ /* XXX: DSI transcoder paranoia */
+ if (WARN_ON(IS_DSI_TRANSCODER(cpu_transcoder)))
+ return;
+
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
if (temp & TRANS_DDI_PHSYNC)
flags |= DRM_MODE_FLAG_PHSYNC;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 842467528892..f1d0a868e80c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4906,7 +4906,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
intel_set_pipe_timings(intel_crtc);
- if (intel_crtc->config->cpu_transcoder != TRANSCODER_EDP) {
+ if (intel_crtc->config->cpu_transcoder < TRANSCODER_EDP) {
I915_WRITE(PIPE_MULT(intel_crtc->config->cpu_transcoder),
intel_crtc->config->pixel_multiplier - 1);
}
@@ -4957,7 +4957,10 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
dev_priv->display.initial_watermarks(pipe_config);
else
intel_update_watermarks(crtc);
- intel_enable_pipe(intel_crtc);
+
+ /* XXX: Do the pipe assertions at the right place for BXT DSI. */
+ if (!intel_crtc->config->has_dsi_encoder)
+ intel_enable_pipe(intel_crtc);
if (intel_crtc->config->has_pch_encoder)
lpt_pch_enable(crtc);
@@ -5090,7 +5093,9 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
drm_crtc_vblank_off(crtc);
assert_vblank_disabled(crtc);
- intel_disable_pipe(intel_crtc);
+ /* XXX: Do the pipe assertions at the right place for BXT DSI. */
+ if (!intel_crtc->config->has_dsi_encoder)
+ intel_disable_pipe(intel_crtc);
if (intel_crtc->config->dp_encoder_is_mst)
intel_ddi_set_vc_payload_alloc(crtc, false);
@@ -7707,7 +7712,8 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
enum pipe pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
- intel_set_trans_timings(intel_crtc);
+ if (!IS_DSI_TRANSCODER(cpu_transcoder))
+ intel_set_trans_timings(intel_crtc);
/* Workaround: when the EDP input selection is B, the VTOTAL_B must be
* programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
@@ -7765,9 +7771,11 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc,
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
uint32_t tmp;
- intel_get_trans_timings(crtc, pipe_config);
+ if (!IS_DSI_TRANSCODER(cpu_transcoder))
+ intel_get_trans_timings(crtc, pipe_config);
tmp = I915_READ(PIPESRC(crtc->pipe));
pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
@@ -8776,9 +8784,11 @@ static void haswell_set_pipeconf(struct drm_crtc *crtc)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
enum pipe pipe = intel_crtc->pipe;
+ enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder;
u32 val;
- haswell_set_transconf(crtc);
+ if (!IS_DSI_TRANSCODER(cpu_transcoder))
+ haswell_set_transconf(crtc);
I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
@@ -9936,6 +9946,47 @@ static bool hsw_get_trans_config(struct intel_crtc *crtc,
return tmp & PIPECONF_ENABLE;
}
+static bool bxt_get_dsi_trans_config(struct intel_crtc *crtc,
+ struct intel_crtc_state *pipe_config,
+ unsigned long *power_domain_mask)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum intel_display_power_domain power_domain;
+ enum port port;
+ enum transcoder cpu_transcoder;
+ u32 tmp;
+
+ pipe_config->has_dsi_encoder = false;
+
+ for_each_port_masked(port, BIT(PORT_A) | BIT(PORT_C)) {
+ if (port == PORT_A)
+ cpu_transcoder = TRANSCODER_DSI_A;
+ else
+ cpu_transcoder = TRANSCODER_DSI_C;
+
+ power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
+ if (!intel_display_power_get_if_enabled(dev_priv, power_domain))
+ continue;
+ *power_domain_mask |= BIT(power_domain);
+
+ /* XXX: this works for video mode only */
+ tmp = I915_READ(BXT_MIPI_PORT_CTRL(port));
+ if (!(tmp & DPI_ENABLE))
+ continue;
+
+ tmp = I915_READ(MIPI_CTRL(port));
+ if ((tmp & BXT_PIPE_SELECT_MASK) != BXT_PIPE_SELECT(crtc->pipe))
+ continue;
+
+ pipe_config->cpu_transcoder = cpu_transcoder;
+ pipe_config->has_dsi_encoder = true;
+ break;
+ }
+
+ return pipe_config->has_dsi_encoder;
+}
+
static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
@@ -9997,10 +10048,18 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
active = hsw_get_trans_config(crtc, pipe_config, &power_domain_mask);
+ if (IS_BROXTON(dev_priv)) {
+ bxt_get_dsi_trans_config(crtc, pipe_config, &power_domain_mask);
+ WARN_ON(active && pipe_config->has_dsi_encoder);
+ if (pipe_config->has_dsi_encoder)
+ active = true;
+ }
+
if (!active)
goto out;
- haswell_get_ddi_port_state(crtc, pipe_config);
+ if (!pipe_config->has_dsi_encoder)
+ haswell_get_ddi_port_state(crtc, pipe_config);
intel_get_pipe_timings(crtc, pipe_config);
@@ -10026,7 +10085,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
(I915_READ(IPS_CTL) & IPS_ENABLE);
- if (pipe_config->cpu_transcoder != TRANSCODER_EDP) {
+ if (pipe_config->cpu_transcoder < TRANSCODER_EDP) {
pipe_config->pixel_multiplier =
I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
} else {
@@ -15516,10 +15575,18 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- i915_reg_t reg = PIPECONF(crtc->config->cpu_transcoder);
+ enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
- /* Clear any frame start delays used for debugging left by the BIOS */
- I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
+ if (!IS_DSI_TRANSCODER(cpu_transcoder)) {
+ i915_reg_t reg = PIPECONF(cpu_transcoder);
+
+ /*
+ * Clear any frame start delays used for debugging left by the
+ * BIOS.
+ */
+ I915_WRITE(reg,
+ I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
+ }
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
@@ -16195,6 +16262,7 @@ intel_display_capture_error_state(struct drm_device *dev)
error->pipe[i].stat = I915_READ(PIPESTAT(i));
}
+ /* Note: this does not include DSI transcoders. */
error->num_transcoders = INTEL_INFO(dev)->num_pipes;
if (HAS_DDI(dev_priv->dev))
error->num_transcoders++; /* Account for eDP. */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 02b3d22862a1..6e8c1386129e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -436,7 +436,8 @@ struct intel_crtc_state {
bool has_infoframe;
/* CPU Transcoder for the pipe. Currently this can only differ from the
- * pipe on Haswell (where we have a special eDP transcoder). */
+ * pipe on Haswell and later (where we have a special eDP transcoder)
+ * and Broxton (where we have special DSI transcoders). */
enum transcoder cpu_transcoder;
/*
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 73c15210fdb1..47fd0296a05a 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -268,6 +268,7 @@ static inline bool is_cmd_mode(struct intel_dsi *intel_dsi)
static bool intel_dsi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
base);
struct intel_connector *intel_connector = intel_dsi->attached_connector;
@@ -284,6 +285,14 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
/* DSI uses short packets for sync events, so clear mode flags for DSI */
adjusted_mode->flags = 0;
+ if (IS_BROXTON(dev_priv)) {
+ /* Dual link goes to DSI transcoder A. */
+ if (intel_dsi->ports == BIT(PORT_C))
+ pipe_config->cpu_transcoder = TRANSCODER_DSI_C;
+ else
+ pipe_config->cpu_transcoder = TRANSCODER_DSI_A;
+ }
+
return true;
}
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 2e88a5e06884..d189a0012277 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -89,6 +89,10 @@ intel_display_power_domain_str(enum intel_display_power_domain domain)
return "TRANSCODER_C";
case POWER_DOMAIN_TRANSCODER_EDP:
return "TRANSCODER_EDP";
+ case POWER_DOMAIN_TRANSCODER_DSI_A:
+ return "TRANSCODER_DSI_A";
+ case POWER_DOMAIN_TRANSCODER_DSI_C:
+ return "TRANSCODER_DSI_C";
case POWER_DOMAIN_PORT_DDI_A_LANES:
return "PORT_DDI_A_LANES";
case POWER_DOMAIN_PORT_DDI_B_LANES:
@@ -419,6 +423,8 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
BIT(POWER_DOMAIN_PIPE_A) | \
BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
+ BIT(POWER_DOMAIN_TRANSCODER_DSI_A) | \
+ BIT(POWER_DOMAIN_TRANSCODER_DSI_C) | \
BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
BIT(POWER_DOMAIN_PORT_DSI) | \
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
