From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Check whether the DPLL is even enabled before readoing out the dividers and trying to derive port_clock on CHV. We already did this on VLV. Also remove the comment "MIPI" comment from the VLV code since we call this function whenever the pipe is enabled. Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/intel_display.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 98aae3914e9e..3e6b5fb140ad 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7969,8 +7969,8 @@ static void vlv_crtc_clock_get(struct intel_crtc *crtc, u32 mdiv; int refclk = 100000; - /* In case of MIPI DPLL will not even be used */ - if (!(pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)) + /* In case of DSI, DPLL will not be used */ + if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0) return; mutex_lock(&dev_priv->sb_lock); @@ -8066,6 +8066,10 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc, u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3; int refclk = 100000; + /* In case of DSI, DPLL will not be used */ + if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0) + return; + mutex_lock(&dev_priv->sb_lock); cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port)); pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port)); -- 2.4.10 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
