From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
The VLV and CHV DPLL disable and update are almost identical in
how the DPLL/DPLL_MD registers need to be set up. But the code
looks more different than it really is. Try to bring them into
line.
v2: s/chv_update_pll/chv_compute_dpll/
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 63 ++++++++++++++----------------------
1 file changed, 25 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 22930f05457c..414ed5007e60 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1759,16 +1759,13 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
/* Make sure the pipe isn't still relying on us */
assert_pipe_disabled(dev_priv, pipe);
- /*
- * Leave integrated clock source and reference clock enabled for pipe B.
- * The latter is needed for VGA hotplug / manual detection.
- */
- val = DPLL_VGA_MODE_DIS;
- if (pipe == PIPE_B)
- val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REF_CLK_ENABLE_VLV;
+ val = DPLL_INTEGRATED_REF_CLK_VLV |
+ DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
+ if (pipe != PIPE_A)
+ val |= DPLL_INTEGRATED_CRI_CLK_VLV;
+
I915_WRITE(DPLL(pipe), val);
POSTING_READ(DPLL(pipe));
-
}
static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
@@ -1779,11 +1776,11 @@ static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
/* Make sure the pipe isn't still relying on us */
assert_pipe_disabled(dev_priv, pipe);
- /* Set PLL en = 0 */
val = DPLL_SSC_REF_CLK_CHV |
DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
if (pipe != PIPE_A)
val |= DPLL_INTEGRATED_CRI_CLK_VLV;
+
I915_WRITE(DPLL(pipe), val);
POSTING_READ(DPLL(pipe));
@@ -7240,24 +7237,27 @@ void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n)
static void vlv_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
- u32 dpll, dpll_md;
+ pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
+ DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
+ DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV;
+ if (crtc->pipe != PIPE_A)
+ pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
- /*
- * Enable DPIO clock input. We should never disable the reference
- * clock for pipe B, since VGA hotplug / manual detection depends
- * on it.
- */
- dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REF_CLK_ENABLE_VLV |
- DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_REF_CLK_VLV;
- /* We should never disable this, set it here for state tracking */
- if (crtc->pipe == PIPE_B)
- dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
- dpll |= DPLL_VCO_ENABLE;
- pipe_config->dpll_hw_state.dpll = dpll;
+ pipe_config->dpll_hw_state.dpll_md =
+ (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+}
+
+static void chv_compute_dpll(struct intel_crtc *crtc,
+ struct intel_crtc_state *pipe_config)
+{
+ pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
+ DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
+ DPLL_VCO_ENABLE;
+ if (crtc->pipe != PIPE_A)
+ pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
- dpll_md = (pipe_config->pixel_multiplier - 1)
- << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- pipe_config->dpll_hw_state.dpll_md = dpll_md;
+ pipe_config->dpll_hw_state.dpll_md =
+ (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
}
static void vlv_prepare_pll(struct intel_crtc *crtc,
@@ -7351,19 +7351,6 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
mutex_unlock(&dev_priv->sb_lock);
}
-static void chv_compute_dpll(struct intel_crtc *crtc,
- struct intel_crtc_state *pipe_config)
-{
- pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
- DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
- DPLL_VCO_ENABLE;
- if (crtc->pipe != PIPE_A)
- pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
-
- pipe_config->dpll_hw_state.dpll_md =
- (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
-}
-
static void chv_prepare_pll(struct intel_crtc *crtc,
const struct intel_crtc_state *pipe_config)
{
--
2.4.10
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
