On Mon, 07 Mar 2016, ville.syrjala@xxxxxxxxxxxxxxx wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> After the GMBUS transfer times out, we set force_bit=1 and
> return -EAGAIN expecting the i2c core to call the .master_xfer
> hook again so that we will retry the same transfer via bit-banging.
> This is in case the gmbus hardware is somehow faulty.
>
> Unfortunately we left adapter->retries to 0, meaning the i2c core
> didn't actually do the retry. Let's tell the core we want one retry
> when we return -EAGAIN.
>
> Note that i2c-algo-bit also uses this retry count for some internal
> retries, so we'll end up increasing those a bit as well.
I think I must have confused this with the dp aux i2c adapter retries
which does get initialized to 3. Meh.
Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Cc: drm-intel-fixes@xxxxxxxxxxxxxxxxxxxxx
> Fixes: bffce907d640 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer")
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_i2c.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
> index deb8282c26d8..52fbe530fc9e 100644
> --- a/drivers/gpu/drm/i915/intel_i2c.c
> +++ b/drivers/gpu/drm/i915/intel_i2c.c
> @@ -664,6 +664,12 @@ int intel_setup_gmbus(struct drm_device *dev)
>
> bus->adapter.algo = &gmbus_algorithm;
>
> + /*
> + * We wish to retry with bit banging
> + * after a timed out GMBUS attempt.
> + */
> + bus->adapter.retries = 1;
> +
> /* By default use a conservative clock rate */
> bus->reg0 = pin | GMBUS_RATE_100KHZ;
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
