From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Now that the mess with AUX clock divder rounding is sorted out and
we have both cdclk and rawclk cached in dev_priv, we can clean up
the .get_aux_clock_divider() functions a bit.
The main thing here is just calling ilk_get_aux_clock_divider()
from hsw_get_aux_clock_divider() except for the LPT:H special
case.
We could go further and call g4x_get_aux_clock_divider() from
ilk_get_aux_clock_divider() for the PCH ports, but I'm sure Jani
would object, so leave that be.
While at it repeat the comment where the AUX clock comes from
in ilk_get_aux_clock_divider().
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b0ad6201680d..c24d1a6ad912 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -676,22 +676,29 @@ static uint32_t g4x_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
+ if (index)
+ return 0;
+
/*
* The clock divider is based off the hrawclk, and would like to run at
- * 2MHz. So, take the hrawclk value and divide by 2 and use that
+ * 2MHz. So, take the hrawclk value and divide by 2000 and use that
*/
- return index ? 0 : DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
+ return DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
}
static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = intel_dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
if (index)
return 0;
+ /*
+ * The clock divider is based off the cdclk or PCH rawclk, and would
+ * like to run at 2MHz. So, take the cdclk or PCH rawclk value and
+ * divide by 2000 and use that
+ */
if (intel_dig_port->port == PORT_A)
return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000);
else
@@ -701,23 +708,18 @@ static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct drm_device *dev = intel_dig_port->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
- if (intel_dig_port->port == PORT_A) {
- if (index)
- return 0;
- return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000);
- } else if (HAS_PCH_LPT_H(dev_priv)) {
+ if (intel_dig_port->port != PORT_A && HAS_PCH_LPT_H(dev_priv)) {
/* Workaround for non-ULT HSW */
switch (index) {
case 0: return 63;
case 1: return 72;
default: return 0;
}
- } else {
- return index ? 0 : DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
}
+
+ return ilk_get_aux_clock_divider(intel_dp, index);
}
static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
--
2.4.10
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
