Re: [PATCH] drm/i915/bxt: Additional MIPI clock divider form B0 stepping onwards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thursday 18 February 2016 02:00 AM, Jani Nikula wrote:
On Mon, 15 Feb 2016, Deepak M <m.deepak@xxxxxxxxx> wrote:
The MIPI clock calculations for the addtional clock
are revised from B0 stepping onwards, the bit definitions
have changed compared to old stepping.

v2: Fixing compilation warning.
v3: Retained the old Macros (Jani)

Signed-off-by: Deepak M <m.deepak@xxxxxxxxx>
Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Tested-by: Ramalingam C <ramalingam.c@xxxxxxxxx>

Tested it on BXT-T with Tianma panel.


---
  drivers/gpu/drm/i915/i915_reg.h      | 96 +++++++++++++++++++-----------------
  drivers/gpu/drm/i915/intel_dsi_pll.c | 56 ++++++++++++++-------
  2 files changed, 89 insertions(+), 63 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 144586e..4e61b06 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7663,58 +7663,62 @@ enum skl_disp_power_wells {
  #define  BXT_MIPI_DIV_SHIFT(port)		\
  			_MIPI_PORT(port, BXT_MIPI1_DIV_SHIFT, \
  					BXT_MIPI2_DIV_SHIFT)
-/* Var clock divider to generate TX source. Result must be < 39.5 M */
-#define  BXT_MIPI1_ESCLK_VAR_DIV_MASK		(0x3F << 26)
-#define  BXT_MIPI2_ESCLK_VAR_DIV_MASK		(0x3F << 10)
-#define  BXT_MIPI_ESCLK_VAR_DIV_MASK(port)	\
-			_MIPI_PORT(port, BXT_MIPI1_ESCLK_VAR_DIV_MASK, \
-						BXT_MIPI2_ESCLK_VAR_DIV_MASK)
-
-#define  BXT_MIPI_ESCLK_VAR_DIV(port, val)	\
-			(val << BXT_MIPI_DIV_SHIFT(port))
+
  /* TX control divider to select actual TX clock output from (8x/var) */
-#define  BXT_MIPI1_TX_ESCLK_SHIFT		21
-#define  BXT_MIPI2_TX_ESCLK_SHIFT		5
+#define  BXT_MIPI1_TX_ESCLK_SHIFT		26
+#define  BXT_MIPI2_TX_ESCLK_SHIFT		10
  #define  BXT_MIPI_TX_ESCLK_SHIFT(port)		\
  			_MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_SHIFT, \
  					BXT_MIPI2_TX_ESCLK_SHIFT)
-#define  BXT_MIPI1_TX_ESCLK_FIXDIV_MASK		(3 << 21)
-#define  BXT_MIPI2_TX_ESCLK_FIXDIV_MASK		(3 << 5)
+#define  BXT_MIPI1_TX_ESCLK_FIXDIV_MASK		(0x3F << 26)
+#define  BXT_MIPI2_TX_ESCLK_FIXDIV_MASK		(0x3F << 10)
  #define  BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)	\
  			_MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_FIXDIV_MASK, \
-						BXT_MIPI2_TX_ESCLK_FIXDIV_MASK)
-#define  BXT_MIPI_TX_ESCLK_8XDIV_BY2(port)	\
-		(0x0 << BXT_MIPI_TX_ESCLK_SHIFT(port))
-#define  BXT_MIPI_TX_ESCLK_8XDIV_BY4(port)	\
-		(0x1 << BXT_MIPI_TX_ESCLK_SHIFT(port))
-#define  BXT_MIPI_TX_ESCLK_8XDIV_BY8(port)	\
-		(0x2 << BXT_MIPI_TX_ESCLK_SHIFT(port))
-/* RX control divider to select actual RX clock output from 8x*/
-#define  BXT_MIPI1_RX_ESCLK_SHIFT		19
-#define  BXT_MIPI2_RX_ESCLK_SHIFT		3
-#define  BXT_MIPI_RX_ESCLK_SHIFT(port)		\
-			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_SHIFT, \
-					BXT_MIPI2_RX_ESCLK_SHIFT)
-#define  BXT_MIPI1_RX_ESCLK_FIXDIV_MASK		(3 << 19)
-#define  BXT_MIPI2_RX_ESCLK_FIXDIV_MASK		(3 << 3)
-#define  BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port)	\
-		(3 << BXT_MIPI_RX_ESCLK_SHIFT(port))
-#define  BXT_MIPI_RX_ESCLK_8X_BY2(port)	\
-		(1 << BXT_MIPI_RX_ESCLK_SHIFT(port))
-#define  BXT_MIPI_RX_ESCLK_8X_BY3(port)	\
-		(2 << BXT_MIPI_RX_ESCLK_SHIFT(port))
-#define  BXT_MIPI_RX_ESCLK_8X_BY4(port)	\
-		(3 << BXT_MIPI_RX_ESCLK_SHIFT(port))
-/* BXT-A WA: Always prog DPHY dividers to 00 */
-#define  BXT_MIPI1_DPHY_DIV_SHIFT		16
-#define  BXT_MIPI2_DPHY_DIV_SHIFT		0
-#define  BXT_MIPI_DPHY_DIV_SHIFT(port)		\
-			_MIPI_PORT(port, BXT_MIPI1_DPHY_DIV_SHIFT, \
-					BXT_MIPI2_DPHY_DIV_SHIFT)
-#define  BXT_MIPI_1_DPHY_DIVIDER_MASK		(3 << 16)
-#define  BXT_MIPI_2_DPHY_DIVIDER_MASK		(3 << 0)
-#define  BXT_MIPI_DPHY_DIVIDER_MASK(port)	\
-		(3 << BXT_MIPI_DPHY_DIV_SHIFT(port))
+					BXT_MIPI2_TX_ESCLK_FIXDIV_MASK)
+#define  BXT_MIPI_TX_ESCLK_DIVIDER(port, val)	\
+		((val & 0x3F) << BXT_MIPI_TX_ESCLK_SHIFT(port))
+/* RX upper control divider to select actual RX clock output from 8x*/
+#define  BXT_MIPI1_RX_ESCLK_UPPER_SHIFT		21
+#define  BXT_MIPI2_RX_ESCLK_UPPER_SHIFT		5
+#define  BXT_MIPI_RX_ESCLK_UPPER_SHIFT(port)		\
+			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_UPPER_SHIFT, \
+					BXT_MIPI2_RX_ESCLK_UPPER_SHIFT)
+#define  BXT_MIPI1_RX_ESCLK_UPPER_FIXDIV_MASK		(3 << 21)
+#define  BXT_MIPI2_RX_ESCLK_UPPER_FIXDIV_MASK		(3 << 5)
+#define  BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port) 	\
+			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_UPPER_FIXDIV_MASK,\
+					BXT_MIPI2_RX_ESCLK_UPPER_FIXDIV_MASK)
+#define  BXT_MIPI_RX_ESCLK_UPPER_DIVIDER(port, val)	\
+		((val & 3) << BXT_MIPI_RX_ESCLK_UPPER_SHIFT(port))
+/* 8/3X divider to select the actual 8/3X clock output from 8x*/
+#define  BXT_MIPI1_8X_BY3_SHIFT                19
+#define  BXT_MIPI2_8X_BY3_SHIFT                3
+#define  BXT_MIPI_8X_BY3_SHIFT(port)          \
+			_MIPI_PORT(port, BXT_MIPI1_8X_BY3_SHIFT, \
+					BXT_MIPI2_8X_BY3_SHIFT)
+#define  BXT_MIPI1_8X_BY3_DIVIDER_MASK         (3 << 19)
+#define  BXT_MIPI2_8X_BY3_DIVIDER_MASK         (3 << 3)
+#define  BXT_MIPI_8X_BY3_DIVIDER_MASK(port)    \
+			_MIPI_PORT(port, BXT_MIPI1_8X_BY3_DIVIDER_MASK, \
+						BXT_MIPI2_8X_BY3_DIVIDER_MASK)
+#define  BXT_MIPI_8X_BY3_DIVIDER(port, val)    \
+			((val & 3) << BXT_MIPI_8X_BY3_SHIFT(port))
+/* RX lower control divider to select actual RX clock output from 8x*/
+#define  BXT_MIPI1_RX_ESCLK_LOWER_SHIFT		16
+#define  BXT_MIPI2_RX_ESCLK_LOWER_SHIFT		0
+#define  BXT_MIPI_RX_ESCLK_LOWER_SHIFT(port)		\
+			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_LOWER_SHIFT, \
+					BXT_MIPI2_RX_ESCLK_LOWER_SHIFT)
+#define  BXT_MIPI1_RX_ESCLK_LOWER_FIXDIV_MASK		(3 << 16)
+#define  BXT_MIPI2_RX_ESCLK_LOWER_FIXDIV_MASK		(3 << 0)
+#define  BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port)	\
+			_MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_LOWER_FIXDIV_MASK, \
+					BXT_MIPI2_RX_ESCLK_LOWER_FIXDIV_MASK)
+#define  BXT_MIPI_RX_ESCLK_LOWER_DIVIDER(port, val)	\
+		((val & 3) << BXT_MIPI_RX_ESCLK_LOWER_SHIFT(port))
+
+#define RX_DIVIDER_BIT_1_2                     0x3
+#define RX_DIVIDER_BIT_3_4                     0xC
/* BXT MIPI mode configure */
  #define  _BXT_MIPIA_TRANS_HACTIVE			0x6B0F8
diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c
index bb5e95a..02aeae5 100644
--- a/drivers/gpu/drm/i915/intel_dsi_pll.c
+++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
@@ -362,35 +362,57 @@ static void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
  /* Program BXT Mipi clocks and dividers */
  static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port)
  {
-	u32 tmp;
-	u32 divider;
-	u32 dsi_rate;
-	u32 pll_ratio;
  	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 tmp;
+	u32 dsi_rate = 0;
+	u32 pll_ratio = 0;
+	u32 rx_div;
+	u32 tx_div;
+	u32 rx_div_upper;
+	u32 rx_div_lower;
+	u32 mipi_8by3_divider;
/* Clear old configurations */
  	tmp = I915_READ(BXT_MIPI_CLOCK_CTL);
  	tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));
-	tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port));
-	tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port));
-	tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port));
+	tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port));
+	tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port));
+	tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port));
/* Get the current DSI rate(actual) */
  	pll_ratio = I915_READ(BXT_DSI_PLL_CTL) &
  				BXT_DSI_PLL_RATIO_MASK;
  	dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2;
- /* Max possible output of clock is 39.5 MHz, program value -1 */
-	divider = (dsi_rate / BXT_MAX_VAR_OUTPUT_KHZ) - 1;
-	tmp |= BXT_MIPI_ESCLK_VAR_DIV(port, divider);
+	/*
+	 * tx clock should be <= 20MHz and the div value must be
+	 * subtracted by 1 as per bspec
+	 */
+	tx_div = DIV_ROUND_UP(dsi_rate, 20000) - 1;
+	/*
+	 * rx clock should be <= 150MHz and the div value must be
+	 * subtracted by 1 as per bspec
+	 */
+	rx_div = DIV_ROUND_UP(dsi_rate, 150000) - 1;
/*
-	 * Tx escape clock must be as close to 20MHz possible, but should
-	 * not exceed it. Hence select divide by 2
+	 * rx divider value needs to be updated in the
+	 * two differnt bit fields in the register hence splitting the
+	 * rx divider value accordingly
  	 */
-	tmp |= BXT_MIPI_TX_ESCLK_8XDIV_BY2(port);
+	rx_div_lower = rx_div & RX_DIVIDER_BIT_1_2;
+	rx_div_upper = (rx_div & RX_DIVIDER_BIT_3_4) >> 2;
+
+	/* As per bpsec program the 8/3X clock divider to the below value */
+	if (dev_priv->vbt.dsi.config->is_cmd_mode)
+		mipi_8by3_divider = 0x2;
+	else
+		mipi_8by3_divider = 0x3;
- tmp |= BXT_MIPI_RX_ESCLK_8X_BY3(port);
+	tmp |= BXT_MIPI_8X_BY3_DIVIDER(port, mipi_8by3_divider);
+	tmp |= BXT_MIPI_TX_ESCLK_DIVIDER(port, tx_div);
+	tmp |= BXT_MIPI_RX_ESCLK_LOWER_DIVIDER(port, rx_div_lower);
+	tmp |= BXT_MIPI_RX_ESCLK_UPPER_DIVIDER(port, rx_div_upper);
I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);
  }
@@ -513,9 +535,9 @@ static void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
  	/* Clear old configurations */
  	tmp = I915_READ(BXT_MIPI_CLOCK_CTL);
  	tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));
-	tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port));
-	tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port));
-	tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port));
+	tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port));
+	tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port));
+	tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port));
  	I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);
  	I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
  }

--
Thanks,
--Ram

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux