From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
Track VCO frequency of SKL instead of the boot CDCLK and allow modeset
to set cdclk based on the max required pixel clock based on VCO
selected.
The vco should be tracked at the atomic level and all CRTCs updated if
the required vco is changed. At this time the eDP pll is configured
inside the encoder which has no visibility into the atomic state. When
eDP v1.4 panel that require the 8640 vco are available this may need
to be investigated.
V1: initial version
V2: add vco tracking in intel_dp_compute_config(), rename
skl_boot_cdclk.
V3: rebase, V2 feedback not possible as encoders are not aware of
atomic.
Signed-off-by: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
Cc: Ville =?iso-8859-1?Q?Syrj=E4l=E4?= <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 2 +-
drivers/gpu/drm/i915/intel_ddi.c | 2 +-
drivers/gpu/drm/i915/intel_display.c | 83
+++++++++++++++++++++++++++++-----
drivers/gpu/drm/i915/intel_dp.c | 9 +++-
drivers/gpu/drm/i915/intel_drv.h | 1 +
5 files changed, 81 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h
b/drivers/gpu/drm/i915/i915_drv.h
index 8216665..f65dd1a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1822,7 +1822,7 @@ struct drm_i915_private {
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
unsigned int fsb_freq, mem_freq, is_ddr3;
- unsigned int skl_boot_cdclk;
+ unsigned int skl_vco_freq;
unsigned int cdclk_freq, max_cdclk_freq, atomic_cdclk_freq;
unsigned int max_dotclk_freq;
unsigned int hpll_freq;
diff --git a/drivers/gpu/drm/i915/intel_ddi.c
b/drivers/gpu/drm/i915/intel_ddi.c
index 6d5b09f..285adab 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2958,7 +2958,7 @@ void intel_ddi_pll_init(struct drm_device *dev)
int cdclk_freq;
cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
- dev_priv->skl_boot_cdclk = cdclk_freq;
+ dev_priv->skl_vco_freq = skl_cdclk_get_vco(cdclk_freq);
if (skl_sanitize_cdclk(dev_priv))
DRM_DEBUG_KMS("Sanitized cdclk programmed by pre-os\n");
if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE))
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 9e2273b..372a68f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5663,7 +5663,7 @@ static unsigned int skl_cdclk_decimal(unsigned
int freq)
return (freq - 1000) / 500;
}
-static unsigned int skl_cdclk_get_vco(unsigned int freq)
+unsigned int skl_cdclk_get_vco(unsigned int freq)
{
unsigned int i;
@@ -5821,17 +5821,17 @@ void skl_uninit_cdclk(struct drm_i915_private
*dev_priv)
void skl_init_cdclk(struct drm_i915_private *dev_priv)
{
- unsigned int required_vco;
-
/* DPLL0 not enabled (happens on early BIOS versions) */
if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE)) {
/* enable DPLL0 */
- required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
- skl_dpll0_enable(dev_priv, required_vco);
+ if (dev_priv->skl_vco_freq != 8640) {
+ dev_priv->skl_vco_freq = 8100;
+ }
+ skl_dpll0_enable(dev_priv, dev_priv->skl_vco_freq);
}
/* set CDCLK to the frequency the BIOS chose */
- skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
+ skl_set_cdclk(dev_priv, (dev_priv->skl_vco_freq == 8100) ? 337500
: 308570 );
/* enable DBUF power */
I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
@@ -5847,7 +5847,7 @@ int skl_sanitize_cdclk(struct drm_i915_private
*dev_priv)
{
uint32_t lcpll1 = I915_READ(LCPLL1_CTL);
uint32_t cdctl = I915_READ(CDCLK_CTL);
- int freq = dev_priv->skl_boot_cdclk;
+ int freq = dev_priv->cdclk_freq;
/*
* check if the pre-os intialized the display
@@ -5871,11 +5871,7 @@ int skl_sanitize_cdclk(struct drm_i915_private
*dev_priv)
/* All well; nothing to sanitize */
return false;
sanitize:
- /*
- * As of now initialize with max cdclk till
- * we get dynamic cdclk support
- * */
- dev_priv->skl_boot_cdclk = dev_priv->max_cdclk_freq;
+
skl_init_cdclk(dev_priv);
/* we did have to sanitize */
@@ -9845,6 +9841,64 @@ static void
broadwell_modeset_commit_cdclk(struct drm_atomic_state *old_state)
broadwell_set_cdclk(dev, req_cdclk);
}
+static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->dev);
+ int max_pixclk = ilk_max_pixel_rate(state);
+ int cdclk;
+
+ /*
+ * FIXME should also account for plane ratio
+ * once 64bpp pixel formats are supported.
+ */
+
+ if (dev_priv->skl_vco_freq == 8640) {
+ /* vco 8640 */
+ if (max_pixclk > 540000)
+ cdclk = 617140;
+ else if (max_pixclk > 432000)
+ cdclk = 540000;
+ else if (max_pixclk > 308570)
+ cdclk = 432000;
+ else
+ cdclk = 308570;
+ }
+ else {
+ /* VCO 8100 */
+ if (max_pixclk > 540000)
+ cdclk = 675000;
+ else if (max_pixclk > 450000)
+ cdclk = 540000;
+ else if (max_pixclk > 337500)
+ cdclk = 450000;
+ else
+ cdclk = 337500;
+ }
+
+ /*
+ * FIXME move the cdclk caclulation to
+ * compute_config() so we can fail gracegully.
+ */
+ if (cdclk > dev_priv->max_cdclk_freq) {
+ DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
+ cdclk, dev_priv->max_cdclk_freq);
+ cdclk = dev_priv->max_cdclk_freq;
+ }
+
+ to_intel_atomic_state(state)->cdclk = cdclk;
+
+ return 0;
+}
+
+static void skl_modeset_commit_cdclk(struct drm_atomic_state *old_state)
+{
+ struct drm_device *dev = old_state->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ unsigned int req_cdclk = to_intel_atomic_state(old_state)->cdclk;
+
+ skl_set_cdclk(dev_priv, req_cdclk);
+}
+
static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
@@ -15002,6 +15056,11 @@ static void intel_init_display(struct
drm_device *dev)
broxton_modeset_commit_cdclk;
dev_priv->display.modeset_calc_cdclk =
broxton_modeset_calc_cdclk;
+ } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
+ dev_priv->display.modeset_commit_cdclk =
+ skl_modeset_commit_cdclk;
+ dev_priv->display.modeset_calc_cdclk =
+ skl_modeset_calc_cdclk;
}
switch (INTEL_INFO(dev)->gen) {
diff --git a/drivers/gpu/drm/i915/intel_dp.c
b/drivers/gpu/drm/i915/intel_dp.c
index a073f04..0ed25a8 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1242,9 +1242,10 @@ intel_dp_connector_unregister(struct
intel_connector *intel_connector)
}
static void
-skl_edp_set_pll_config(struct intel_crtc_state *pipe_config)
+skl_edp_set_pll_config(struct drm_i915_private *dev_priv, struct
intel_crtc_state *pipe_config)
{
u32 ctrl1;
+ u32 vco = 8100;
memset(&pipe_config->dpll_hw_state, 0,
sizeof(pipe_config->dpll_hw_state));
@@ -1277,13 +1278,17 @@ skl_edp_set_pll_config(struct intel_crtc_state
*pipe_config)
case 108000:
ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
SKL_DPLL0);
+ vco = 8640;
break;
case 216000:
ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160,
SKL_DPLL0);
+ vco = 8640;
break;
}
+
+ dev_priv->skl_vco_freq = vco;
pipe_config->dpll_hw_state.ctrl1 = ctrl1;
}
@@ -1664,7 +1669,7 @@ found:
}
if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) && is_edp(intel_dp))
- skl_edp_set_pll_config(pipe_config);
+ skl_edp_set_pll_config(dev_priv, pipe_config);
else if (IS_BROXTON(dev))
/* handled in ddi */;
else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
diff --git a/drivers/gpu/drm/i915/intel_drv.h
b/drivers/gpu/drm/i915/intel_drv.h
index 878172a..1acfdf9 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1191,6 +1191,7 @@ void bxt_disable_dc9(struct drm_i915_private
*dev_priv);
void skl_init_cdclk(struct drm_i915_private *dev_priv);
int skl_sanitize_cdclk(struct drm_i915_private *dev_priv);
void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
+unsigned int skl_cdclk_get_vco(unsigned int freq);
void skl_enable_dc6(struct drm_i915_private *dev_priv);
void skl_disable_dc6(struct drm_i915_private *dev_priv);
void intel_dp_get_m_n(struct intel_crtc *crtc,
