Re: [PATCH v2 1/6] drm/i915: Use atomic state to obtain load detection crtc, v2.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 02-02-16 om 18:32 schreef Ville Syrjälä:
> On Tue, Feb 02, 2016 at 01:48:17PM +0100, Maarten Lankhorst wrote:
>> drm/i915: Use atomic state to obtain load detection crtc, v2.
>>
>> Instead of restoring dpms and a flag for whether a temp fb is allocated duplicate
>> an atomic state before the new state is committed, and commit it the old state
>> in intel_release_load_detect_pipe.
>>
>> Changes since v1:
>> - Use a real atomic state.
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
>> ---
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 4d8c9f7857db..c7ba8f4a971e 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -10361,6 +10361,7 @@ mode_fits_in_fbdev(struct drm_device *dev,
>>  	if (obj->base.size < mode->vdisplay * fb->pitches[0])
>>  		return NULL;
>>  
>> +	drm_framebuffer_reference(fb);
>>  	return fb;
>>  #else
>>  	return NULL;
>> @@ -10416,7 +10417,7 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector,
>>  	struct drm_device *dev = encoder->dev;
>>  	struct drm_framebuffer *fb;
>>  	struct drm_mode_config *config = &dev->mode_config;
>> -	struct drm_atomic_state *state = NULL;
>> +	struct drm_atomic_state *state = NULL, *restore_state = NULL;
>>  	struct drm_connector_state *connector_state;
>>  	struct intel_crtc_state *crtc_state;
>>  	int ret, i = -1;
>> @@ -10425,6 +10426,8 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector,
>>  		      connector->base.id, connector->name,
>>  		      encoder->base.id, encoder->name);
>>  
>> +	old->restore_state = NULL;
>> +
>>  retry:
>>  	ret = drm_modeset_lock(&config->connection_mutex, ctx);
>>  	if (ret)
>> @@ -10441,24 +10444,15 @@ retry:
>>  	 */
>>  
>>  	/* See if we already have a CRTC for this connector */
>> -	if (encoder->crtc) {
>> -		crtc = encoder->crtc;
>> +	if (connector->state->crtc) {
>> +		crtc = connector->state->crtc;
>>  
>>  		ret = drm_modeset_lock(&crtc->mutex, ctx);
>>  		if (ret)
>>  			goto fail;
>> -		ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
>> -		if (ret)
>> -			goto fail;
>> -
>> -		old->dpms_mode = connector->dpms;
>> -		old->load_detect_temp = false;
>>  
>>  		/* Make sure the crtc and connector are running */
>> -		if (connector->dpms != DRM_MODE_DPMS_ON)
>> -			connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
>> -
>> -		return true;
>> +		goto found;
>>  	}
>>  
>>  	/* Find an unused one (if possible) */
>> @@ -10466,8 +10460,15 @@ retry:
>>  		i++;
>>  		if (!(encoder->possible_crtcs & (1 << i)))
>>  			continue;
>> -		if (possible_crtc->state->enable)
>> +
>> +		ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
>> +		if (ret)
>> +			goto fail;
>> +
>> +		if (possible_crtc->state->enable) {
>> +			drm_modeset_unlock(&possible_crtc->mutex);
>>  			continue;
>> +		}
>>  
>>  		crtc = possible_crtc;
>>  		break;
>> @@ -10481,23 +10482,22 @@ retry:
>>  		goto fail;
>>  	}
>>  
>> -	ret = drm_modeset_lock(&crtc->mutex, ctx);
>> -	if (ret)
>> -		goto fail;
>> +found:
>> +	intel_crtc = to_intel_crtc(crtc);
>> +
>>  	ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
>>  	if (ret)
>>  		goto fail;
>>  
>> -	intel_crtc = to_intel_crtc(crtc);
>> -	old->dpms_mode = connector->dpms;
>> -	old->load_detect_temp = true;
>> -	old->release_fb = NULL;
>> -
>>  	state = drm_atomic_state_alloc(dev);
>> -	if (!state)
>> -		return false;
>> +	restore_state = drm_atomic_state_alloc(dev);
>> +	if (!state || !restore_state) {
>> +		ret = -ENOMEM;
>> +		goto fail;
>> +	}
>>  
>>  	state->acquire_ctx = ctx;
>> +	restore_state->acquire_ctx = ctx;
>>  
>>  	connector_state = drm_atomic_get_connector_state(state, connector);
>>  	if (IS_ERR(connector_state)) {
>> @@ -10505,7 +10505,9 @@ retry:
>>  		goto fail;
>>  	}
>>  
>> -	connector_state->crtc = crtc;
>> +	ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
>> +	if (ret)
>> +		goto fail;
>>  
>>  	crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
>>  	if (IS_ERR(crtc_state)) {
>> @@ -10529,7 +10531,6 @@ retry:
>>  	if (fb == NULL) {
>>  		DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
>>  		fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
>> -		old->release_fb = fb;
>>  	} else
>>  		DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
>>  	if (IS_ERR(fb)) {
>> @@ -10541,15 +10542,28 @@ retry:
>>  	if (ret)
>>  		goto fail;
>>  
>> -	drm_mode_copy(&crtc_state->base.mode, mode);
>> +	drm_framebuffer_unreference(fb);
>> +
>> +	ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
>> +	if (ret)
>> +		goto fail;
>> +
>> +	ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
>> +	if (!ret)
>> +		ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
>> +	if (!ret)
>> +		ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state, crtc->primary));
>> +	if (ret) {
>> +		DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
>> +		goto fail;
>> +	}
>>  
>>  	if (drm_atomic_commit(state)) {
>>  		DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
>> -		if (old->release_fb)
>> -			old->release_fb->funcs->destroy(old->release_fb);
>>  		goto fail;
>>  	}
>> -	crtc->primary->crtc = crtc;
>> +
>> +	old->restore_state = restore_state;
>>  
>>  	/* let the connector get through one full cycle before testing */
>>  	intel_wait_for_vblank(dev, intel_crtc->pipe);
>> @@ -10557,7 +10571,8 @@ retry:
>>  
>>  fail:
>>  	drm_atomic_state_free(state);
>> -	state = NULL;
>> +	drm_atomic_state_free(restore_state);
>> +	restore_state = state = NULL;
>>  
>>  	if (ret == -EDEADLK) {
>>  		drm_modeset_backoff(ctx);
>> @@ -10571,14 +10586,12 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
>>  				    struct intel_load_detect_pipe *old,
>>  				    struct drm_modeset_acquire_ctx *ctx)
>>  {
>> -	struct drm_device *dev = connector->dev;
>>  	struct intel_encoder *intel_encoder =
>>  		intel_attached_encoder(connector);
>>  	struct drm_encoder *encoder = &intel_encoder->base;
>> -	struct drm_crtc *crtc = encoder->crtc;
>> +	struct drm_crtc *crtc = connector->state->crtc;
>>  	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>> -	struct drm_atomic_state *state;
>> -	struct drm_connector_state *connector_state;
>> +	struct drm_atomic_state *state = old->restore_state;
>>  	struct intel_crtc_state *crtc_state;
>>  	int ret;
>>  
>> @@ -10586,50 +10599,17 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
>>  		      connector->base.id, connector->name,
>>  		      encoder->base.id, encoder->name);
>>  
>> -	if (old->load_detect_temp) {
>> -		state = drm_atomic_state_alloc(dev);
>> -		if (!state)
>> -			goto fail;
>> -
>> -		state->acquire_ctx = ctx;
>> -
>> -		connector_state = drm_atomic_get_connector_state(state, connector);
>> -		if (IS_ERR(connector_state))
>> -			goto fail;
>> -
>> -		crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
>> -		if (IS_ERR(crtc_state))
>> -			goto fail;
>> -
>> -		connector_state->crtc = NULL;
>> -
>> -		crtc_state->base.enable = crtc_state->base.active = false;
>> -
>> -		ret = intel_modeset_setup_plane_state(state, crtc, NULL, NULL,
>> -						      0, 0);
>> -		if (ret)
>> -			goto fail;
>> -
>> -		ret = drm_atomic_commit(state);
>> -		if (ret)
>> -			goto fail;
>> -
>> -		if (old->release_fb) {
>> -			drm_framebuffer_unregister_private(old->release_fb);
>> -			drm_framebuffer_unreference(old->release_fb);
>> -		}
>> -
>> +	if (!state)
>>  		return;
>> -	}
>>  
>> -	/* Switch crtc and encoder back off if necessary */
>> -	if (old->dpms_mode != DRM_MODE_DPMS_ON)
>> -		connector->funcs->dpms(connector, old->dpms_mode);
>> +	crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
>> +	crtc_state->shared_dpll = to_intel_crtc_state(crtc->state)->shared_dpll;
> Hmm. What's this shared_dpll stuff?
It's for intel_modeset_clear_plls, normally we duplicate the new state and it's handled correctly,
but when we duplicate the old state the pll may be different and unexpected behavior could occur
otherwise.

~Maarten
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux