On Mon, Dec 21, 2015 at 07:31:17AM -0800, Matt Roper wrote:
> In commit
>
> commit 024c9045221fe45482863c47c4b4c47d37f97cbf
> Author: Matt Roper <matthew.d.roper@xxxxxxxxx>
> Date: Thu Sep 24 15:53:11 2015 -0700
>
> drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-style WM (v4)
>
> I fumbled while converting the dimensions stored in the plane_parameters
> structure to the values stored in plane state and accidentally replaced
> the plane dimensions with the pipe dimensions in both the DDB allocation
> function and the WM calculation function. On the DDB side this is
> harmless since we effectively treat all of our non-cursor planes as
> full-screen which may not be optimal, but generally won't cause any
> problems either (and in 99% of the cases where there's no sprite plane
> usage or primary plane windowing, there's no effect at all). On the WM
> calculation side there's more potential for this fumble to cause actual
> problems since cursors also get miscalculated.
>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxx>
> Cc: "Kondapally, Kalyan" <kalyan.kondapally@xxxxxxxxx>
> Cc: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
> Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
Bump; I think this patch got lost in the mix while most people were out
over the holiday break.
Matt
> ---
> drivers/gpu/drm/i915/intel_pm.c | 24 +++++++++++++-----------
> 1 file changed, 13 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 8d0d6f5..f4d4cc7 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2845,25 +2845,22 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
> const struct drm_plane_state *pstate,
> int y)
> {
> - struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
> + struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
> struct drm_framebuffer *fb = pstate->fb;
> + unsigned w = drm_rect_width(&intel_pstate->dst);
> + unsigned h = drm_rect_height(&intel_pstate->dst);
>
> /* for planar format */
> if (fb->pixel_format == DRM_FORMAT_NV12) {
> if (y) /* y-plane data rate */
> - return intel_crtc->config->pipe_src_w *
> - intel_crtc->config->pipe_src_h *
> - drm_format_plane_cpp(fb->pixel_format, 0);
> + return w * h * drm_format_plane_cpp(fb->pixel_format, 0);
> else /* uv-plane data rate */
> - return (intel_crtc->config->pipe_src_w/2) *
> - (intel_crtc->config->pipe_src_h/2) *
> + return (w/2) * (h/2) *
> drm_format_plane_cpp(fb->pixel_format, 1);
> }
>
> /* for packed formats */
> - return intel_crtc->config->pipe_src_w *
> - intel_crtc->config->pipe_src_h *
> - drm_format_plane_cpp(fb->pixel_format, 0);
> + return w * h * drm_format_plane_cpp(fb->pixel_format, 0);
> }
>
> /*
> @@ -2960,6 +2957,8 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
> * FIXME: we may not allocate every single block here.
> */
> total_data_rate = skl_get_total_relative_data_rate(cstate);
> + if (!total_data_rate)
> + return;
>
> start = alloc->start;
> for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
> @@ -3093,12 +3092,15 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
> {
> struct drm_plane *plane = &intel_plane->base;
> struct drm_framebuffer *fb = plane->state->fb;
> + struct intel_plane_state *intel_pstate =
> + to_intel_plane_state(plane->state);
> uint32_t latency = dev_priv->wm.skl_latency[level];
> uint32_t method1, method2;
> uint32_t plane_bytes_per_line, plane_blocks_per_line;
> uint32_t res_blocks, res_lines;
> uint32_t selected_result;
> uint8_t bytes_per_pixel;
> + unsigned w = drm_rect_width(&intel_pstate->dst);
>
> if (latency == 0 || !cstate->base.active || !fb)
> return false;
> @@ -3109,12 +3111,12 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
> latency);
> method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate),
> cstate->base.adjusted_mode.crtc_htotal,
> - cstate->pipe_src_w,
> + w,
> bytes_per_pixel,
> fb->modifier[0],
> latency);
>
> - plane_bytes_per_line = cstate->pipe_src_w * bytes_per_pixel;
> + plane_bytes_per_line = w * bytes_per_pixel;
> plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
>
> if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
> --
> 2.1.4
>
--
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
