On Tue, 2015-12-01 at 04:17 +0530, Deepak M wrote:
> From: vkorjani <vikas.korjani@xxxxxxxxx>
>
> New sequence element for i2c is been added in the
> mipi sequence block of the VBT. This patch parses
> and executes the i2c sequence.
>
> v2: Add i2c_put_adapter call(Jani), rebase
> v3: corrected the retry loop(Jani), rebase
>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Tested-by: Mika Kahola <mika.kahola@xxxxxxxxx>
> Signed-off-by: vkorjani <vikas.korjani@xxxxxxxxx>
> Signed-off-by: Deepak M <m.deepak@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_bios.c | 6 +++
> drivers/gpu/drm/i915/intel_bios.h | 1 +
> drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 60 ++++++++++++++++++++++++++++++
> 3 files changed, 67 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index ce82f9c..6756a1c 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -718,6 +718,12 @@ static u8 *goto_next_sequence(u8 *data, int *size)
>
> data += 3;
> break;
> + case MIPI_SEQ_ELEM_I2C:
> + /* skip by this element payload size */
> + data += 7;
> + len = *data;
> + data += len + 1;
> + break;
> default:
> DRM_ERROR("Unknown element\n");
> return NULL;
> diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
> index 7ec8c9a..4ec73f5 100644
> --- a/drivers/gpu/drm/i915/intel_bios.h
> +++ b/drivers/gpu/drm/i915/intel_bios.h
> @@ -954,6 +954,7 @@ enum mipi_seq_element {
> MIPI_SEQ_ELEM_SEND_PKT,
> MIPI_SEQ_ELEM_DELAY,
> MIPI_SEQ_ELEM_GPIO,
> + MIPI_SEQ_ELEM_I2C,
> MIPI_SEQ_ELEM_STATUS,
> MIPI_SEQ_ELEM_MAX
> };
> diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> index a5e99ac..92d619a 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> @@ -31,6 +31,7 @@
> #include <drm/drm_panel.h>
> #include <linux/slab.h>
> #include <video/mipi_display.h>
> +#include <linux/i2c.h>
> #include <asm/intel-mid.h>
> #include <video/mipi_display.h>
> #include "i915_drv.h"
> @@ -104,6 +105,64 @@ static struct gpio_table gtable[] = {
> { GPIO_NC_11_PCONF0, GPIO_NC_11_PAD, 0}
> };
>
> +static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
> +{
> + struct i2c_adapter *adapter;
> + int ret;
> + u8 reg_offset, payload_size, retries = 5;
> + struct i2c_msg msg;
> + u8 *transmit_buffer = NULL;
> + u8 flag = *data++;
> + u8 index = *data++;
> + u8 bus_number = *data++;
> + u16 slave_add = *(u16 *)(data);
> +
> + data = data + 2;
> + reg_offset = *data++;
> + payload_size = *data++;
> +
> + adapter = i2c_get_adapter(bus_number);
> +
> + if (!adapter) {
> + DRM_ERROR("i2c_get_adapter(%u)\n", bus_number);
> + goto out;
> + }
> +
> + transmit_buffer = kmalloc(1 + payload_size, GFP_TEMPORARY);
> +
> + if (!transmit_buffer)
> + goto out;
> +
> + transmit_buffer[0] = reg_offset;
> + memcpy(&transmit_buffer[1], data, payload_size);
> +
> + msg.addr = slave_add;
> + msg.flags = 0;
> + msg.len = payload_size + 1;
> + msg.buf = &transmit_buffer[0];
> +
> + do {
> + ret = i2c_transfer(adapter, &msg, 1);
> + if (ret == 1)
> + goto out;
> + else if (ret == -EAGAIN)
> + usleep_range(1000, 2500);
> + else {
> + DRM_ERROR("i2c transfer failed, error code:%d\n", ret);
> + goto out;
> + }
> + } while (retries--);
> +
> + if (retries == 0)
> + DRM_ERROR("i2c transfer failed, error code:%d\n", ret);
> +out:
> + kfree(transmit_buffer);
> + i2c_put_adapter(adapter);
> +
> + data = data + payload_size;
> + return data;
> +}
> +
> static inline enum port intel_dsi_seq_port_to_port(u8 port)
> {
> return port ? PORT_C : PORT_A;
> @@ -236,6 +295,7 @@ static const fn_mipi_elem_exec exec_elem[] = {
> mipi_exec_send_packet,
> mipi_exec_delay,
> mipi_exec_gpio,
> + mipi_exec_i2c,
> NULL, /* status read; later */
> };
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
