Re: [PATCH] drm/i915: Wait for PP cycle delay only if panel is in power off sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 9, 2015 at 7:27 PM, Ville Syrjälä
<ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> On Wed, Dec 09, 2015 at 06:51:48PM +0530, Shobhit Kumar wrote:
>> During resume, while turning the EDP panel power on, we need not wait
>> blindly for panel_power_cycle_delay. Check if panel power down sequence
>> in progress and then only wait. This improves our resume time significantly.
>>
>> Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
>> ---
>>  drivers/gpu/drm/i915/intel_dp.c | 17 ++++++++++++++++-
>>  1 file changed, 16 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>> index f335c92..10ec669 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -617,6 +617,20 @@ static bool edp_have_panel_power(struct intel_dp *intel_dp)
>>       return (I915_READ(_pp_stat_reg(intel_dp)) & PP_ON) != 0;
>>  }
>>
>> +static bool edp_panel_off_seq(struct intel_dp *intel_dp)
>> +{
>> +     struct drm_device *dev = intel_dp_to_dev(intel_dp);
>> +     struct drm_i915_private *dev_priv = dev->dev_private;
>> +
>> +     lockdep_assert_held(&dev_priv->pps_mutex);
>> +
>> +     if (IS_VALLEYVIEW(dev) &&
>> +         intel_dp->pps_pipe == INVALID_PIPE)
>> +             return false;
>> +
>> +     return (I915_READ(_pp_stat_reg(intel_dp)) & PP_SEQUENCE_POWER_DOWN) != 0;
>> +}
>
> This doens't make sense to me. The power down cycle may have
> completed just before, and so this would claim we don't have to
> wait for the power_cycle_delay.

Not sure I understand your concern correctly. You are right, power
down cycle may have completed just before and if it has then we don't
need to wait. But in case the power down cycle is in progress as per
internal state, then we need to wait for it to complete. This will
happen for example in non-suspend disable path and will be handled
correctly. In case of actual suspend/resume, this would have
successfully completed and will skip the wait as it is not needed
before enabling panel power.

>
>> +
>>  static bool edp_have_panel_vdd(struct intel_dp *intel_dp)
>>  {
>>       struct drm_device *dev = intel_dp_to_dev(intel_dp);
>> @@ -2025,7 +2039,8 @@ static void edp_panel_on(struct intel_dp *intel_dp)
>>                port_name(dp_to_dig_port(intel_dp)->port)))
>>               return;
>>
>> -     wait_panel_power_cycle(intel_dp);
>> +     if (edp_panel_off_seq(intel_dp))
>> +             wait_panel_power_cycle(intel_dp);
>>
>>       pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
>>       pp = ironlake_get_pp_control(intel_dp);
>> --
>> 2.4.3
>
> --
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux